TinyMight / TM 2
- Thread starter kuzko
- Start date
Stueylakes
Well-Known Member
Sorry in the delay sir he he
.13 coarse BCG grind level 9.
And the money shot.
No ring whatsoever due to the air distributor channels above the heater. Had a little bit left but marginal. Tasty as fuck.
The lower level temps are where this thing really shines and this whole non stirring malarkey is quite frankly magnificent.
Ive almost done 3 Molis today purely in the name of science and for you guys. I can safely say it fucking rocks. Everything that was good is better, some massively, some marginally and everything that was annoying is gone. Top job Ville.
Heres a nice pic with a cheeky bit of Ed thrown in.
Who in EU wants a very well maintained OG..
Last edited:
Djsleepy
Well-Known Member
Very well said I’m super stoked you guys feel the same as me and as you said “Everything that was good is better”Sorry in the delay sir he he
.13 coarse BCG grind level 9.
And the money shot.
No ring whatsoever due to the air distributor channels above the heater. Had a little bit left but marginal. Tasty as fuck.
The lower level temps are where this thing really shines and this whole non stirring malarkey is quite frankly magnificent.
Ive almost done 3 Molis today purely in the name of science and for you guys. I can safely say it fucking rocks. Everything that was good is better, some massively, some marginally and everything that was annoying is gone. Top job Ville.
Heres a nice pic with a cheeky bit of Ed thrown in.
Who in EU wants a very well maintained OG..
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Without getting into any comparison or venturing off topic, I would answer your question with an absolutely! Each of these is unique, and has different use case for me, but the answer truly depends entirely on you
I find the TM the most versatile personally
Barhen
Well-Known Member
Want. This is sold out
TM07 Tiny Might / RBT - GR2 Titanium & Acrylic WPA/MP for Tiny Might / RBT Stems
Hand turned acrylic and GR2 titanium MP for the Tiny Might / RBT This MP/WPA slips into either stem with included O rings. Its smooth finish, beautiful colors and 14mm taper add great looking functionality to your Tiny Might or RBTtheroguewaxworks.com
. Does he plan to make more? Is he a member here or there a way to contact him?
Abele Rizieri Ferrari
Well-Known Member
His account here is @RogueGuy he's also on insta under the rogue wax works I believeWant. This is sold out
Stueylakes
Well-Known Member
Thanks man. Its bizarre as id been considering switching to vaping for years. I worked in Amsterdam alot so had used Vocanos for years. The Tinymight when it first got announced and when Vapefiend got them briefly was my only window to buy, so couldn't. Then the sagas of the first gen devices....so i got a Mighty....which to be fair stopped me from smoking so yay. A year later I got my OG and for 17 months its not skipped a beat.
This is so much better. Dont get me wrong the OG is and will remain an incredible device but the improvements put this in a unique league of devices.
On par now or dare I say it, yes I will better than my Tetra P80.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Want. This is sold out
Yeah best way is to follow him on IG for when he drops updates new stock to the store, but you can also message him for specific requests, faster response there
Someone collected the stem options a week or two ago, so unless someone else wants to search the thread for you, unfortunately you'll need to go back and look for it. The GRAV is my personal go-to, and what you need is a stem with an outer diameter of 16 mm. My impression (not having looked into all of the options) is that GRAV is the only mass produced option, and most of the others are done by relatively small glass artisans (for lack of a better term).
To be honest, you could probably google "tinymight cooling stem" and get a few aftermarket options.
Abele Rizieri Ferrari
Well-Known Member
A WPA opens lots of possibilities, they come in 18 and 14 mm size.
There's some great glass artists making stems with all types of cooling, look up good vibes boro on insta for examples or search the rogue wax works for Tinymight.
Also welcome to the forum!
daneoleary
New Member
I actually did start with some Googling. It brought up a lot of first-party accessories sold by resellers. I was kind of looking for like the products out there that may not be marketed as TM accessories but end up working really well.
I had noticed it seemed a lot of people were using WPA with a number of accessories. I’m definitely not opposed although I’d prefer plug-and-play simplicity. I’m very new to vaping in general so I figured I’d start with recommendations from the pros.
And thank you
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Just skim backwards here, there is another thread for alternative stems as well, and a j-hook thread, in the glass section
theroguewaxworks.comI actually did start with some Googling. It brought up a lot of first-party accessories sold by resellers. I was kind of looking for like the products out there that may not be marketed as TM accessories but end up working really well.
I had noticed it seemed a lot of people were using WPA with a number of accessories. I’m definitely not opposed although I’d prefer plug-and-play simplicity. I’m very new to vaping in general so I figured I’d start with recommendations from the pros.
And thank you
highartisan.com
edstnt.com
Vgoodiez.com
Goodvibesboro on ig.
Milliken wood works on etsy.
Jill NYC
Portable Hoarder
The stem needs to be 16mm outer diameter (od). This isn’t a very common width, unfortunately but there are more and more coming out all the time!
Here is a thread that should help:
Other brands of Accessories that fit the TinyMight.
My Tinymight will be arriving on Tuesday and I am already thinking about what aftermarket upgrades (stems or WPA). I know some splinter stems work but I’m not sure which ones. Any information would be helpful and appreciated. I am new here so hopefully I’m doing this right.
fuckcombustion.com
Abele Rizieri Ferrari
Well-Known Member
I get 2 bowls per charge in my TM1 with all 4 of my 1 month old moli's I have in rotation lol, you should be fine.
Thanks. Think I'll order some more batteries, and have a bunch charged.
Can the TM handle long session? For example passing round multiple users, and swapping out batteries to keep going. Would this overwhelm the actual unit?
Abele Rizieri Ferrari
Well-Known Member
It's nice to have a couple batteries in rotation that you keep charged externally. Also better for battery to load externally I believe. Be sure to buy from a reputable source, nkon in EU for example. The TM faq mentions the preferred battery models iirc.
As for heavy use, I only use the TM by myself in chill on demand style, so can't say for sure. But I know there are members here who put their unit through a lot of use without issue.
https://streamable.com/xgsynp
It came in! A video of the wood
I love itAluminum is also beautifully finished on TM2!!
Gonna try now with some cherry haze
Djsleepy
Well-Known Member
Not at all I’ve tortured tested this bad boy and it can do the job no problem!
Thanks everyone for the kind comments! Just a heads up that a second drop of Tinymight 2 will be available to buy at Vapefiend at 1pm UK time on Saturday 10th September.
Greensnila420
Member
Not wanting to seem like an anxious consumer, I am getting a bit concerned.
I successfully ordered the Tinymight 2 when it launched and received the DHL Express tracking number, which is not working.
It was stated in the email that it could take up to 18 hours to start working, and it has been 34 hours now.
After seeing people receiving their units already, i do not understand how my tracking number is not working yet.
Came up yesterday on Reddit with a customer complaining that he did not receive his OG TM yet, and he made the order on the 1st of July.
Hopefully it will not happen the same to me!
Anyone here still waiting for the tracking number to start working?
I successfully ordered the Tinymight 2 when it launched and received the DHL Express tracking number, which is not working.
It was stated in the email that it could take up to 18 hours to start working, and it has been 34 hours now.
After seeing people receiving their units already, i do not understand how my tracking number is not working yet.
Came up yesterday on Reddit with a customer complaining that he did not receive his OG TM yet, and he made the order on the 1st of July.
Hopefully it will not happen the same to me!
Anyone here still waiting for the tracking number to start working?
I've got the same problem. I received a tracking number, which was already used back in 2021. I do not understand how you even do something like that. Another problem is that he had to manually change my order because the website didn't correctly copied the Billing to the shipping address, and after that update there's now something missing in the order (an accessory) and the total charged amount also changed in the invoice.. (but still got charged 20$ more at the original order). I wrote him, now I'm waiting what will happen.
(Just now I realised that there is a shipping-thread, sorry about that!)
Vaporific
All who wander are not lost...
Finally heard back from Tinymight about initiating a repair return for my poor and fried board OG Tinymight. Got the DHL label too. Also got a nice message and some details on the RED one - only one or two made so far though they’ll be coming in a small limited edition release down the road (TBD). I will not be getting TM 2 so soon - but eventually (in RED).
I ask if someone who’s sent in theirs for repair please PM me as I have a couple of quick questions about the DHL process and the directions for shipping it back for repair.
I ask if someone who’s sent in theirs for repair please PM me as I have a couple of quick questions about the DHL process and the directions for shipping it back for repair.
A question for veteran TM 1 owners.
Is it more efficient to leave it on standby mode, if you are only taking a hit 5-10 mins apart? Or should I turn it on/off for each hit?
Does it make sense to leave the unit switched on if doing a fast reload for another bowl?
Is it more efficient to leave it on standby mode, if you are only taking a hit 5-10 mins apart? Or should I turn it on/off for each hit?
Does it make sense to leave the unit switched on if doing a fast reload for another bowl?
Last edited:
Md_Hybrid
Stuck under a 🪵
That is 8am Eastern, 5am Pacific for the U.S. BTW I noticed a small error on your TM2 listing, the warranty is listed as 2 years instead of 10.