Discontinued The Grasshopper

[MoltenTiger]

there's a reup of the pic at a different source

ironically, I picked that exact charger up as a "cheapo, small footprint" charger, when I was purchasing my FW6 a few weeks back.

Really looking forward to the USB-C of HBC... that, in addition to the @maxvapor710 PA will be something of a dream

Amazing

The Sapphire dish really contrasts nicely with the Green flower.

All in all, this is the set up to aspire too. I'm even loving that vintage 2019 WS. You've truly got all bases covered in the best of manners


PS I missed a key part of the question before, RE: unloading, the Arizer SS Stirring Tool is a personal favourite:

But this just reminded me, @Hopper Labs, you should resell something like this^

I'd also look into a good brush, the MFLB brush is my go-to, I hear good things about the S&B brush too, but really, buying a commercial qty is going to be a good way to get a quick buck.
I have a heap of stokers and a couple of brushes - there's always something to be said about the right tool for the job, quality speaks for itself and doesn't necessarily add to the initial costs

 

[Mr. Me2]

What is everyone's preferred way to load/unload their 'hopper?

I rely on tools from @Ratchett. His stand is a must have. And I use his mini scoop and poke that was designed for the gh narrow oven. But I’m tempted to give his gh funnel a try...

Edit - I’ll add that if you’re looking for quality tools, I suggest you check out @RogueGuy. He has a thread at http://fuckcombustion.com/threads/the-rogue-wax-works.40814/

He has the best stuff (and very reasonably priced too) and another super nice guy.

 

[JCat]

I rely on tools from @Ratchett. His stand is a must have. And I use his mini scoop and poke that was designed for the gh narrow oven. But I’m tempted to give his gh funnel a try...

The funnel is a "must have" accessory IMHO (although I've never tried one of the Hopper Feeders that people talk about ... I've always used the Delta3D funnel )

 

[Vaporific]

I just load by hand. Plain and simple. Yep, no funnel or scoop. Very minimalistic as long as my hands aren’t too dirty using the crook between the thumb and index finger as the funnel (and yes I’ll try to wash them before loading of course not always possible but I factor that in - to keep it simple).

 

[Baron23]

The funnel is a "must have" accessory IMHO (although I've never tried one of the Hopper Feeders that people talk about ... I've always used the Delta3D funnel )

Me too. One of his Lotus stands and the funnel.
One NV loading tools worth is a proper load for me.

 

[david8613]

 

[slozukimc]

I ha

I have to get one of those. I hope I will be able to use my Hopper again soon. CHS sucks ass.

 

[david8613]

I used my grasshopper last night for the first time last night first time. What temperature are you guys running?

 

[Mr. Me2]

I used my grasshopper last night for the first time last night first time. What temperature are you guys running?

On a new one, for me under 3

 

[david8613]

Ok I need a couple of tip, I ran it 11/2 to 2 and wasn't getting much flavor then I just went to 5 and cached the the bowl pretty quick. I want it to last a little longer.

 

[Mr. Me2]

Ok I need a couple of tip, I ran it 11/2 to 2 and wasn't getting much flavor then I just went to 5 and cached the the bowl pretty quick. I want it to last a little longer.

That’s very low. Try 2.5 to 3

 

[david8613]

Oki doki, and how long should I draw? Draw slow fast?

 

[Vaporific]

That’s very low. Try 2.5 to 3

Indeed, that’s my sweet spot range too with my RMA’d pre order Ti. It’s running well!

 

[Mr. Me2]

Oki doki, and how long should I draw? Draw slow fast?

The gh manual states:

Other vapes require a slow and steady draw that lasts between 30 and 90 seconds. This type of draw is not ideal for the Grasshopper. The Grasshopper comes equipped with a very powerful 45-watt heater, a microcontroller to monitor temperature in real-time and a very short vapor path. Its design allows for quick and easy vaporization. Your draw should be faster than with other vapes and last 15-20 seconds. Near the end of your draw, click the device off to allow for all the vapor and warm air to be cleared from the chamber.

I agree on the hard(er) draw. Duration is trial and error. Have fun!

 

[slozukimc]

The gh manual states:

Other vapes require a slow and steady draw that lasts between 30 and 90 seconds. This type of draw is not ideal for the Grasshopper. The Grasshopper comes equipped with a very powerful 45-watt heater, a microcontroller to monitor temperature in real-time and a very short vapor path. Its design allows for quick and easy vaporization. Your draw should be faster than with other vapes and last 15-20 seconds. Near the end of your draw, click the device off to allow for all the vapor and warm air to be cleared from the chamber.

I agree on the hard(er) draw. Duration is trial and error. Have fun!

I find that if you want a big and quick rip set it on a bit over 4, draw quite hard until you feel heat on your lips(about 6 seconds), click the button off and keep drawing for another 6 seconds. This technique will make a giant hit every time and make batteries last a lot longer.

 

[Macicman]

I puff it like a cigar. Puff, puff, puff, then draw.

 

[JeffD]

Better Business Bureau complaints:

https://www.bbb.org/us/co/boulder/p...grasshopper-labs-llc-0885-90245195/complaints

I also got burned (ahem): nov 11 was "okay we'll ship it"
no tracking no nada

I don't think we'll ever get our units back. I've emailed and replied on the warranty board, trying to get my tracking number for the "shipped out" unit that hasn't arrived in two weeks. No response.

https://www.bbb.org/us/co/boulder/p...grasshopper-labs-llc-0885-90245195/complaints

 

[freshly baked]

Fire? Karma's a bitch. I guess my unit that's been in warranty since 2017 was destroyed...good thing I moved on to dynavap over a year ago... never looking back or being more happy... after reporting hopper vapes to the BBB. Found out they already had an F rating without my help. Yep... karma's a bitch. Even failed at burning their own building down.... Goodbye hopper vapes..RIP... you will not be missed.
End rant

 

[Hopper Labs]

Anyone who recently received a Grasshopper or warranty back that now only has a battery we told you not to use, contact us. We will send you an older version one to use while you are waiting for the new batch to be produced.

 

[Mr. Me2]

Anyone who recently received a Grasshopper or warranty back that now only has a battery we told you not to use, contact us. We will send you an older version one to use while you are waiting for the new batch to be produced.

How would you like us to contact you with this information? I’m one of the recent gh buyers...

 

[Hopper Labs]

How would you like us to contact you with this information? I’m one of the recent gh buyers...

You can email support@grasshoppervape.com, which is always monitored or you can PM here.

 

[Heddgyhoggy]

Hi All, recently I’ve noticed my GH is getting weaker. The ABV is golden color and even on temp 5 I cannot reach the good extraction. Any solution for such issue?

 

[vapviking]

I ha

I have to get one of those. I hope I will be able to use my Hopper again soon. CHS sucks ass.

I bought one of the loaders and did liked the clever design and 3-d printed aspect. When all was good, it was nice and handy, no muss/no fuss and all that. But I found that it eventually required somewhat more cleaning than the brush would take care of. They suggest you clean it every couple of fillings. It can become problematic if not clear & clean, and I did not have quite enough patience for it, I guess. By problematic, I mean your weed winding up spilling or maybe hopper getting-over stuffed and that being cause of a jam. After several cycles of like/frustration with it, I was relieved when it broke and I was able to let it go easily.

 

[tennisguru1]

Hi All, recently I’ve noticed my GH is getting weaker. The ABV is golden color and even on temp 5 I cannot reach the good extraction. Any solution for such issue?

A wise man once told me of the GH: "If function starts to suffer, blu-tac the threads of the backend to help remove oxidation that will impact performance"
worked for me :>)

 

[vapviking]

Hi All, recently I’ve noticed my GH is getting weaker. The ABV is golden color and even on temp 5 I cannot reach the good extraction. Any solution for such issue?

Could be threads, yes, but another likely culprit is batteries you use, if they are getting old or have been through a lot of charge cycles.