The ELEV8R from Elev8 Vehicles

[coolbreeze]

What would you say would be better than this for around £200/$250 am from UK so would buy from around here so if you can list a few would be good

I'll be honest I'm not sure what's available to you, but have a look at the ballvape thread, I think it's got some of everything.

I would recommend a Phase3 ZX kit, $200USD currently. It's an amazing little Zirconia vape that's like the elev8r in that its inert materials and design deliver fantastic flavor and high. It's smaller than most injectors at 14mm, but it's a powerhouse nonetheless.

PHASE3

www.gophase3.com

Cloud Connoisseur's Zeal is also amazing and a few bucks less for a kit at $195. I'm not sure if he has a European setup but the info will be in that thread.

Join our great discord ❤️ Great info and even better community! Products with 3D prints please allow 1-2 business days for prints to be made. All wireless kits will now ship with coil stand pictured in epitome kits. Video and pictures of products tha

cloud-connoisseur.company.site

Both are out of stock but check with the vendors, they should be back as soon as they can get them in.

Let me emphasize that the reason these are both Zirconia is because they wanted the purity of glass with much more strength.

Edit: to bring it back on topic: seriously, @Rodney, give the manual elev8r a look if you don't mind the torch. It's a real powerhouse and a lot of fun to use. If you become adept you can go for flavor or ride the line.

 

[angular ocelot]

ive gone electric and got myself an elev8r kit. i have moved to a new flat recently and am worried about the noise from the torch being heard by my neighbours. havent been able to use my analogue one since i moved and i miss it.
anyway, havent used it yet because im waiting for harvest but i have modded it a bit. 3mm rubies to try but also i wrapped the glass heater in aluminium foil to make it fit more snug and transfer heat better. is there any downside to doing this im not aware of?

 

[coolbreeze]

ive gone electric and got myself an elev8r kit. i have moved to a new flat recently and am worried about the noise from the torch being heard by my neighbours. havent been able to use my analogue one since i moved and i miss it.
anyway, havent used it yet because im waiting for harvest but i have modded it a bit. 3mm rubies to try but also i wrapped the glass heater in aluminium foil to make it fit more snug and transfer heat better. is there any downside to doing this im not aware of?

I have seen people mention shimming the coil with folded stainless screens to increase contact, but I've never actually seen it done and don't know how well it works.

 

[angular ocelot]

I have seen people mention shimming the coil with folded stainless screens to increase contact, but I've never actually seen it done and don't know how well it works.

thats what inspired me to try foil. might be putting more heat out into the surrounding air than transmitting, might be the poor state of the quick dried, early taken buds and the tiny amount i used but i had it on 650 and felt like i shoulda had it on earlier. anyways, massively stoned now so it worked.

 

[howie105]

I can vouch for both the foil and the screen shims, (mom would be crushed that I have become such a vape nerd) I used brass screens instead of stainless because they were easier to form. The screens help with conduction between the coil and injector. The foil works but degraded a bit in my case. If one doesn't mind the maintenance or just as a temporary way to check out added thermal mass and insulation, it's fine. I am so sorry, mom!

 

[coolbreeze]

thats what inspired me to try foil. might be putting more heat out into the surrounding air than transmitting, might be the poor state of the quick dried, early taken buds and the tiny amount i used but i had it on 650 and felt like i shoulda had it on earlier. anyways, massively stoned now so it worked.

ah, success!

I can vouch for both the foil and the screen shims, (mom would be crushed that I have become such a vape nerd) I used brass screens instead of stainless because they were easier to form. The screens help with conduction between the coil and injector. The foil works but degraded a bit in my case. If one doesn't mind the maintenance or just as a temporary way to check out added thermal mass and insulation, it's fine. I am so sorry, mom!

Well, we're proud anyhow. : )

 

[Rodney]

i have moved to a new flat recently and am worried about the noise from the torch being heard by my neighbour

I feel exactly the same about my volcano vape at night time but I doubt either can be heard by our neighbours and even if they could hear a tiny noise it is not like it is a big racket or annoying. Like i am betting central heating and general noises pipes in our houses make make much more noise than your torch or my volcano but we still worry about it - I keep meaning to ask my neighbour if they hear my small fan sometimes at night from my heater I would say but never have asked them, My coughing before I got my vapes was non stop so

I think the weed is a part of this worry lol - is good that we care if we affect/annoy/bother other people I suppose and not just thinking of ourselves.

 

[Custom Flower Hardware]

Video Unavailable

This video is unavailable.

streamable.com

 

[davap84]

Video Unavailable

This video is unavailable.

streamable.com

Who wrote this on his profil ? ! "Save those lungs! You'll need them for life."

Legend.
I have to try this.

 

[Custom Flower Hardware]

Video Unavailable

This video is unavailable.

streamable.com

 

[Zenhen]

Been wanting to post this since a while ago but I've been going through some rough times caring for a sick family member and kept putting it off...

I wanted to let everyone know that if you reach out to the kind folks at Elev8 they will make you a custom Elev8r with a smaller sized bowl for micro dosing. I keep my tolerance low since I just use a half bowl on my Dynavap and never take dabs. So I never even go half of the regular size Elev8r bowl.

I love my Elev8rs (have the standard full kit with the wand and rig attachent) but always wanted an all glass/no screen rig attachment for my water piece. When I was ready to order one I gave them a call and asked if I could have one made with a half size smaller bowl to make it easier to microdose. I spoke to the very kind and warm Theresa and she said it would be no problem at all. They didn't even charge me a different price for it. Just had to wait to get it made.

How does it work? Great! I love having an all glass pathway (I removed the screen from the heating tip too) and it takes less butane to heat up my herb because it's closer to the heating element! Only thing I notice is that it gets warmer in my hand when warming up the tip with the torch. But nothing too bad. Give it a try if you microdose!

I'm surprised the Elev8rs aren't more popular than they are because they are awesome in their analog simplicity. AND you can always go electric with a dc attachment too.

EDIT: Was going nuts taking shots of the differences between the custom one and the standard bowl but honestly it's nothing more than a shallower bowl top to bottom. So everything else fits just the same.

 

[Rodney]

guys it seems like i will be getting one of these soon so I must ask. Is Mesh screen WPA or all glass WPA better? I am guessing glass. Also do I need to get anything else with it or just this

Elev8R E-Heater Full Kit

The Elev8r E-heater full kit by Elev8 is our favourite desktop vapouriser, capable of vapourising both dry herb and concentrate but truly excelling at dry herb vaporisation, which is what we use it for. It is a very powerful full convection setup capable of vapourising between 0.06-1g of dry...

recommendedvapesupplies.co.uk

My current daily use vape is the TM2 and I love it but the whole battery changing constant is not so cool and sometimes it can be hit and miss if you get a 10/10 hit BUT it is a lot better than most vapes just i feel the elev8r will be more of a consistent hitter and get the most from my weed.

The other thing is the TM2 will eventually likely need to go in for repair at some point and I DO NOT want left using the volcano or the Mighty+ even if they are good vapes I need the right big hit or I am not satisfied/happy.

I love my elev8r too, but I prefer it in torch set up. It's a really cheap way to get great performance with top of the line flavour.

do you mean this?? it has the heater with it all for cheap. should i get the glass or mesh screen?? they are recommending the mesh screen and it is cheaper.

sorry for the double post

 

[Cheebsy]

Yeah, I didn't enjoy my elev8r coiled, but that could be partially explained by the fact that I can't fit 3mm balls in it, I didn't try any smaller.

If you are looking for consistency I think the coiled one would be great for you, you could always remove the coil if you feel brave enough, and try torching it, or just get another heater for £42. The torch needs a little practice until you get repeatable hits.

 

[coolbreeze]

guys it seems like i will be getting one of these soon so I must ask. Is Mesh screen WPA or all glass WPA better? I am guessing glass. Also do I need to get anything else with it or just this

Elev8R E-Heater Full Kit

The Elev8r E-heater full kit by Elev8 is our favourite desktop vapouriser, capable of vapourising both dry herb and concentrate but truly excelling at dry herb vaporisation, which is what we use it for. It is a very powerful full convection setup capable of vapourising between 0.06-1g of dry...

recommendedvapesupplies.co.uk

My current daily use vape is the TM2 and I love it but the whole battery changing constant is not so cool and sometimes it can be hit and miss if you get a 10/10 hit BUT it is a lot better than most vapes just i feel the elev8r will be more of a consistent hitter and get the most from my weed.

The other thing is the TM2 will eventually likely need to go in for repair at some point and I DO NOT want left using the volcano or the Mighty+ even if they are good vapes I need the right big hit or I am not satisfied/happy.


do you mean this?? it has the heater with it all for cheap. should i get the glass or mesh screen?? they are recommending the mesh screen and it is cheaper.

sorry for the double post

May I suggest considering this instead? These guys have been hand-fitting these for a long time and the PID may be reused with other common gear (it has the US std wiring pattern where the elev8 gear does not).

DC Elev8R (Coil Driven Elev8R) by 7th Floor / Disorderly Conduction

This listing is for the PID Controller / Coil driven Elev8R. If you are looking for the Torch driven Elev8R please check here. All the glass of the Elev8R except the Quartz Heater is made from borosilicate glass in Colorado Springs, CO by Elev8's own glass blowing team. Designed for dry herbs...

vgoodiez.com

With regards to the electric vs torch: both are excellent, the torch version has better airflow and is super easy to use, the DCE is a wonderful sipping or session vape for me but you can get real power out of it, too.

 

[Zenhen]

guys it seems like i will be getting one of these soon so I must ask. Is Mesh screen WPA or all glass WPA better? I am guessing glass. Also do I need to get anything else with it or just this

Elev8R E-Heater Full Kit

The Elev8r E-heater full kit by Elev8 is our favourite desktop vapouriser, capable of vapourising both dry herb and concentrate but truly excelling at dry herb vaporisation, which is what we use it for. It is a very powerful full convection setup capable of vapourising between 0.06-1g of dry...

recommendedvapesupplies.co.uk

My current daily use vape is the TM2 and I love it but the whole battery changing constant is not so cool and sometimes it can be hit and miss if you get a 10/10 hit BUT it is a lot better than most vapes just i feel the elev8r will be more of a consistent hitter and get the most from my weed.

The other thing is the TM2 will eventually likely need to go in for repair at some point and I DO NOT want left using the volcano or the Mighty+ even if they are good vapes I need the right big hit or I am not satisfied/happy.


do you mean this?? it has the heater with it all for cheap. should i get the glass or mesh screen?? they are recommending the mesh screen and it is cheaper.

sorry for the double post

I prefer my all glass rig because I'm one of those people that would rather an all glass pathway for better taste (some people don't notice a difference) and possible safety with regards to fumes emitting from hot metals. (I never trust the quality of replacement screens. I often wonder where they are imported from.) But both versions perform fantastically well.

I should let you know that you will need to grind a coarser grind with the all glass version because you will get some plant material falling through if you grind too fine.

 

[Custom Flower Hardware]

Video Unavailable

This video is unavailable.

streamable.com

 

[Rodney]

This looks amazing!!!! just so I understand this is the weed being heated up by the elev8 and Electropath? sorry if am misunderstanding.

 

[Rodney]

I just ordered the full kit with mesh screen from here.

Elev8R E-Heater Full Kit

The Elev8r E-heater full kit by Elev8 is our favourite desktop vapouriser, capable of vapourising both dry herb and concentrate but truly excelling at dry herb vaporisation, which is what we use it for. It is a very powerful full convection setup capable of vapourising between 0.06-1g of dry...

recommendedvapesupplies.co.uk

will be here by Friday

 

[coolbreeze]

I just ordered the full kit with mesh screen from here.

Elev8R E-Heater Full Kit

The Elev8r E-heater full kit by Elev8 is our favourite desktop vapouriser, capable of vapourising both dry herb and concentrate but truly excelling at dry herb vaporisation, which is what we use it for. It is a very powerful full convection setup capable of vapourising between 0.06-1g of dry...

recommendedvapesupplies.co.uk

will be here by Friday

It's a classic! Hope you have a great time with it!

 

[Rodney]

btw guys I do understand that the DC version from vgoodiez is superior to the E version I am getting and i do plan on picking that up at some point and passing the E Elev8R that is coming tomorrow to a friend.

Just with next day free shipping and place close to me and was getting a few bits from there already so added this and am sure I can get good results with it at a bit higher temperature than the DC version.

I am just happy to be traveling on this road and I enjoy the walk (picking up new vapes) and saving so much money and my health by vaping so can fully justify buying this and more.

 

[coolbreeze]

btw guys I do understand that the DC version from vgoodiez is superior to the E version I am getting and i do plan on picking that up at some point and passing the E Elev8R that is coming tomorrow to a friend.

If your coil fits well and you add the balls, it should function similarly to the Vgoodiez builds but it's good to hear you're going that route anyhow since you will be buying into a well-supported ecosystem with regards to your coil and PID with other vapes. There's a good chance though that they may achieve a more effective build anyhow since they've been doing it in volume for so long.

Just with next day free shipping and place close to me and was getting a few bits from there already so added this and am sure I can get good results with it at a bit higher temperature than the DC version.

You can shim it with screens if you feel that there's not enough contact between the coil and glass. Or you could adjust the coil yourself, but in this case it's more art than science.

I am just happy to be traveling on this road and I enjoy the walk (picking up new vapes) and saving so much money and my health by vaping so can fully justify buying this and more.

I bet you'll love it. If you find that it's not working as expected, just check the contact with the coil and add the balls. If you do add balls, you can fold a screen taco-style and lodge it into the top hole to keep the balls in.

 

[Rodney]

So it arrived and I was not in a great mood as tooth ache and they sent the full glass bowl and not mesh like I asked for and to cap it all off it seemed at first really fiddly and i felt like i would not like it as much as I thought. Like the clip is a total pain to be messing with between stirs, who thought that would be a good idea???

However after putting the balls in it and fitting the coil and having a god I was very impressed. I ran it at 550 and slightly combusted but not much just a few grains. I put too fine a load in it am sure but will go at 530 degree with next use. See I read all these story online about how the E version needs to be ran at 750 but I think they must have had a bad PID or loose coil. My coil fits really snug on it.

My only issue is the clip as when you remove it it fires across the room and is the worse design ever lol

Overall am very happy with this and will be use it a lot after my tooth ace is gone.

https://imgur.com/a/WAfO1S6

 

[coolbreeze]

So it arrived and I was not in a great mood as tooth ache and they sent the full glass bowl and not mesh like I asked for and to cap it all off it seemed at first really fiddly and i felt like i would not like it as much as I thought. Like the clip is a total pain to be messing with between stirs, who thought that would be a good idea???

However after putting the balls in it and fitting the coil and having a god I was very impressed. I ran it at 550 and slightly combusted but not much just a few grains. I put too fine a load in it am sure but will go at 530 degree with next use. See I read all these story online about how the E version needs to be ran at 750 but I think they must have had a bad PID or loose coil. My coil fits really snug on it.

My only issue is the clip as when you remove it it fires across the room and is the worse design ever lol

Overall am very happy with this and will be use it a lot after my tooth ace is gone.

https://imgur.com/a/WAfO1S6

@Rodney, check it and see, but mine will sit securely on the bowl without the clip. The clip is really more handy for manual use, so you can just pick it up and rotate it while you torch it, and then shake to stir. You may still want to clip yours, but it might not be necessary.

 

[highasakite]

So it arrived and I was not in a great mood as tooth ache and they sent the full glass bowl and not mesh like I asked for and to cap it all off it seemed at first really fiddly and i felt like i would not like it as much as I thought. Like the clip is a total pain to be messing with between stirs, who thought that would be a good idea???

However after putting the balls in it and fitting the coil and having a god I was very impressed. I ran it at 550 and slightly combusted but not much just a few grains. I put too fine a load in it am sure but will go at 530 degree with next use. See I read all these story online about how the E version needs to be ran at 750 but I think they must have had a bad PID or loose coil. My coil fits really snug on it.

My only issue is the clip as when you remove it it fires across the room and is the worse design ever lol

Overall am very happy with this and will be use it a lot after my tooth ace is gone.

https://imgur.com/a/WAfO1S6

Since no one said anything, a couple things you should know, and suggestions..

I start mine at 450 and it's perfect for me. Your coil should not be glowing. 500 is way to high, at least for my setup.

The clip should not be used at all. As coolbreeze said, it's for shaking after torching (but I still prefer to stir).

You need a stand for your heater. You take off the heater to clear it and need a safe place for it to rest.

Enjoy!

 

[coolbreeze]

Since no one said anything, a couple things you should know, and suggestions..

I start mine at 450 and it's perfect for me. Your coil should not be glowing. 500 is way to high, at least for my setup.

The clip should not be used at all. As coolbreeze said, it's for shaking after torching (but I still prefer to stir).

You need a stand for your heater. You take off the heater to clear it and need a safe place for it to rest.

Enjoy!

The glowing coil I think is fairly common with e-elev8rs, I think it's from sections being in poor contact, unable to dump heat into the glass. I'm not sure if shimming with mesh will alleviate that, but it might. So would getting a better fit, but that's tricky. @Rodney, you've mentioned getting another from @VGOODIEZ; that should be better fit by more practiced hands. Hopefully between the better fit and gear you will not see much glowing at all. Nevertheless, if you can get a better fit on this one you should mitigate the glowing and increase the efficiency. You'd have a reliable backup.