Weedaholic
Well-Known Member
If you are on about the bowl connected to the wooden stem it's held in by a single o ring..it should just pull straight out
CouchLog
- Thread starter Chris@420Eng
- Start date
sonti
Well-Known Member
I was frustrated enough trying to get it out to just deal with breaking the pad/screen and pushing it out from behind, result being the bowl still being stuck in there... just without screen and cooling pad
I dont know what the hell I did assembling this thing but its STUCK STUCK. calling it a night, my fingers hurt from trying to rip this thing out, and I rather not demolish it more in my frustration by pulling the pliers out
I dont know what the hell I did assembling this thing but its STUCK STUCK. calling it a night, my fingers hurt from trying to rip this thing out, and I rather not demolish it more in my frustration by pulling the pliers out
i have no clue how its stuck, but can you get something under that rim of the herb chamber to pop it out?
Joie de Vivre
Well-Known Member
My screen gets claggy on the first draw so I have airflow issues unless I keep it micro micro, and even then I will need to clean it. It impedes my ability to experiment with temperature and draw strength. Does anyone have tips for resolving this?
I don't have this issue and I use mine throughout the day most days. I use a coarse grind, similar to the the tinymight. Pulled out my screen just now and while it is not clean it is not clogged at all. I have not cleaned it yet, but I do wipe it out with a clean cloth often. Nothing too serious. Is it possible your cooling pads are clogged? I vape mine clean about on a weekly basis so far.
Joie de Vivre
Well-Known Member
ty. I have cleaned the pad I was using but I find even with a Stinger (jams in just) it happens on the first draw, so I take it this is the screen. It may be I am grinding too fine, I can try a bit coarser.
I have a dumb question. What is a stinger? Is that a stem? You insert it over or into the wood stem? I'm confused. Although it sounds like you in territory where I have not traveled.
Joie de Vivre
Well-Known Member
Simrell Stinger, sry. It fits in the stem for cooling instead of a pad.
I was just about to update my post to say that I found it.
That is interesting. Do you find it restrictive if you don't use the simrell MP or cooling pads? Like on a very low temperature? And does visually inspecting the screen show it is clogged?
Joie de Vivre
Well-Known Member
tbh it was recommended to me by Stem in France as a proper fit for his Tinymight WPA, and it looks good on the CouchLog, seals tight and vapes fine but isn't as proper a fit (the o-ring section is not involved, the wide part jams in metal to wood)... and now you've mentioned it, I can open up the airflow and might stop experimenting with that and prefer the pads anyway. Crumbling the weed by hand made a big difference, much better! Thanks. 
If you aren't using it for any other reason I don't think I should recommend the Stinger for this. More experienced vapers may end up differing, which is to say never mind me. lol
If you aren't using it for any other reason I don't think I should recommend the Stinger for this. More experienced vapers may end up differing, which is to say never mind me. lol
I am thinking about dipping back in for a second mouthpiece and glass bowl. @Beefcake@420Eng , any chance you will be adding a grenadil sleeve to the shop? I will probably wait for the grenadil mp to return in either case.
Yes, new wood will arrive next week!
Fantastic! I will warm up the credit card, lol.
Zillacon
🤠🤠🤠🤠
Hey y'all just wanted to check in and say this device is still top of the list for me. I just can't stop using it, I'm already in the market for a second unit. 
A lot of people ask for comparisons to other injectors and really it comes down to rate at which material processed. You go for an 18mm and it will of course get you though more material. The CL exceeds amazingly for it's weight class at 14mm, running and running though countless bowls.
Attached are some pics of material, processed material, and the video of using it with the RBT wpa for HerbCafe. I tried to weigh it but my scale is jank and almost 20years old.
A lot of people ask for comparisons to other injectors and really it comes down to rate at which material processed. You go for an 18mm and it will of course get you though more material. The CL exceeds amazingly for it's weight class at 14mm, running and running though countless bowls.
Attached are some pics of material, processed material, and the video of using it with the RBT wpa for HerbCafe. I tried to weigh it but my scale is jank and almost 20years old.
Ok, I'm all in. Finally.
Many thanks to @Grass Yes for pushing me over that last little bit. Thanks man.
Can anyone who bought an Oak or Kingwood comment on any wood flavoring of those two. I'm desperately trying to find something as neutral as possible, and I realize this may be hard to do on something that is purely subjective. But please, any words whatsoever will help. This cost more than a little wood butane vape, so potentially screwing up this order has been causing me alot of ridiculously stupid stress. I've gone over just about everything in my head, so I know there are mods and such that I'll be able to do if the wood colors it too much, but I would still rather not have to mod anything and just take a rip straight outta the wood stem. Thanks.
Many thanks to @Grass Yes for pushing me over that last little bit. Thanks man.
Can anyone who bought an Oak or Kingwood comment on any wood flavoring of those two. I'm desperately trying to find something as neutral as possible, and I realize this may be hard to do on something that is purely subjective. But please, any words whatsoever will help. This cost more than a little wood butane vape, so potentially screwing up this order has been causing me alot of ridiculously stupid stress. I've gone over just about everything in my head, so I know there are mods and such that I'll be able to do if the wood colors it too much, but I would still rather not have to mod anything and just take a rip straight outta the wood stem. Thanks.
I've said to you in conversation, I don't remember there being any wood flavor initially but it is very neutral now. Thought I would also share it with the thread.
I only have the kingwood stem, but I plan to grab another soon. However I am not too sensitive to any irritation from wood so I suspect I don't notice it as much.
@Grass Yes : Looks like I did need your answer, lol! 
Stueylakes
Well-Known Member
Im all in for this when the new ones pop up! Decision is firmly made. Lets go Chris!
pxl_jockey
Just a dude
Since returning to FC after a long absence, I‘ve been scanning the Plug-Ins top twenty for any new heavy hitters. I somehow missed this vape but happened to see this mysterious CouchLog in some members’ sigs and decided to read the thread. I honestly never thought to get another log, but the performance aspects of CL intrigue/tempt me.
Visually, it’s a beautiful modern design and obviously well crafted, I love the mp and using as a WPA, how kind wood is to glass. After looking in the shop, I think I prefer it in Blackforest Oak, as sexy as the exotic woods are. The fact you can acquire different sleeves later if you want is pretty cool and a definite USP. So I just have two questions remaining for those with knowledge and experience:
Is this really a next-level, heavy-hitting log?
Am I really missing out on something here?
EDIT: one more Q please, does billing info show up as 420eng or 420 anything?
Visually, it’s a beautiful modern design and obviously well crafted, I love the mp and using as a WPA, how kind wood is to glass. After looking in the shop, I think I prefer it in Blackforest Oak, as sexy as the exotic woods are. The fact you can acquire different sleeves later if you want is pretty cool and a definite USP. So I just have two questions remaining for those with knowledge and experience:
Is this really a next-level, heavy-hitting log?
Am I really missing out on something here?
EDIT: one more Q please, does billing info show up as 420eng or 420 anything?
Last edited:
Razhumikin
Well-Known Member
For the first two questions, yes, and yes. As for the third question, idk lol, but i bought mine before the store went up so i just used paypal.Since returning to FC after a long absence, I‘ve been scanning the Plug-Ins top twenty for any new heavy hitters. I somehow missed this vape but happened to see this mysterious CouchLog in some members’ sigs and decided to read the thread. I honestly never thought to get another log, but the performance aspects of CL intrigue/tempt me.
Visually, it’s a beautiful modern design and obviously well crafted, I love the mp and using as a WPA, how kind wood is to glass. After looking in the shop, I think I prefer it in Blackforest Oak, as sexy as the exotic woods are. The fact you can acquire different sleeves later if you want is pretty cool and a definite USP. So I just have two questions remaining for those with knowledge and experience:
Is this really a next-level, heavy-hitting log?
Am I really missing out on something here?
EDIT: one more Q please, does billing info show up as 420eng or 420 anything?
That's great to hear. Mine showed up on my credit card statement as "WWW.420ENG.COM". Doesn't bother me but I think some folks will appreciate that it is now more discrete.For the third, no it doesn't
Wasn't aware of that, but were trying to fix it.That's great to hear. Mine showed up on my credit card statement as "WWW.420ENG.COM". Doesn't bother me but I think some folks will appreciate that it is now more discrete.
The Shop is back with new stuff! 