Then I would suggest a Volcano or other forced air device instead of something where your inhale speed can dramatically change the temperatures at play.
Discontinued VapeXhale Cloud EVO
- Thread starter stonemonkey55
- Start date
Then I would suggest a Volcano or other forced air device instead of something where your inhale speed can dramatically change the temperatures at play.
Socks And Sandals
Well-Known Member
365F would be about a little bit less than 12:30 on the dial, maybe around 12:15 or so. Also keep in mind that every Evo is calibrated slightly differently.. Your Noon could be my 1:00 o cock.. see what I'm saying? While I do believe (after 4 years with the Evo) the heat builds as it heatsinks, It does have a built in analog thermostat that turns green supposedly when it reaches the desired temp.
As long as you are removing your baskets after every hit and not leaving them in there (I'm assuming this is how everyone uses it.. no one leaves their baskets inside for the whole session right guys?) you should be getting approximately the set degree. There were many times where I start my baskets at 350F (Noon) and usually only have to finish at 1 or 1:30 for full extraction. There have been many times where I have vaped two baskets and after the first heat cycle of the first basket, I then bring the temp back down to noon and wait over 5 minutes after it turns green to start again.
I'll be honest, after going to 1 or 1:30 the first time and then bringing it back down to noon, it seems as if it is a little hotter than the first basket. This is why I have never agreed when people say to turn this sucker to 10 and then bring it to noon.. Nah.. In my experience with the 2 Evo's I've owned, that actually heat sinks it too much imo.
YMMV
CANtalk
Well-Known Member
Things are pretty good here, hope ur well too. Try these...
https://fuckcombustion.com/threads/vapexhale-cloud-evo.11357/post-1420878
https://fuckcombustion.com/threads/vapexhale-cloud-evo.11357/post-1421194
https://fuckcombustion.com/threads/vapexhale-cloud-evo.11357/post-1421376
That guy has more hash and EVO videos here.
Making Clouds With Mudflap
Come join me in making some medicinal cannabis clouds as we show, discuss and explore all the new cannabis products and topics. As I turned over a half centu...
www.youtube.com
Enjoy
.dmvision54
New Member
I am new here, but after a month's worth of research, I have narrowed my research down to a Vapexhale Evo as a starting vape and maybe a Tera or Argo as well for something more portable. I wanted to know if you can give me any advice as to whether a person ought to order either the Boro tubes or the Quartz tubes. I am using it primarily to start out with for dry herb, so I don't even get the nature of needing tubes since it has those little metal capsules that fit down into the neck of the Evo for flower. Hopefully you don't mind giving me a little advice. I have learned a lot in the last month, but I haven't followed the vaping industry at all. I'm a boomer who stopped smoking weed in the late 70's...Now I need to start up again for health-related issues, starting with CBD, mostly flower and then maybe getting into distillates.Here is a shot of a 6" extension with a clean Vapor Genie Glass Sherlock substituting as mouthpiece. Dry hits rock.
CANtalk
Well-Known Member
VapeXnails are for having concentrates with the EVO (you can pick them up later if you want). Boro glass nails are cheaper than quartz glass but can't be high heat flame cleaned (like quartz). Which type to get is a personal choice... and it depends on budget and preferred cleaning methods.
For example, I go with a strong (near caustic) cleaning agent, hot water and an ultrasonic cleaner so it's been boro nails for me.
Hope that helps. The EVO is a great premium desktop vape. Good luck
.dmvision54
New Member
VapeXnails are for having concentrates with the EVO (you can pick them up later if you want). Boro glass nails are cheaper than quartz glass but can't be high heat flame cleaned (like quartz). Which type to get is a personal choice... and it depends on budget and preferred cleaning methods.
For example, I go with a strong (near caustic) cleaning agent, hot water and an ultrasonic cleaner so it's been boro nails for me.
Hope that helps. The EVO is a great premium desktop vape. Good luck
Ok, appreciate that. I will just wait on that stuff...especially since I am not probably going to be using thc distillate.
Someone else in the forum here doesn't recommend it for using cbd distillates, just flower.
Fully agree with the heat sinking... no I don't take my basket out. That is a great idea tbh.
m0sh
Singer Song Writer Stoner
My backup EVO is collecting dust for a while now, do I need to use it once in a while to maintain it like a turntable for example? I figured not, but maybe I'm wrong?
I saw a chat on cleaning ELB's and I wanted to share.
I use this to clean the ELB's
I got it from aliexpress a while ago, you can still find it there and on ebay, 10pcs, I got like 100 in total for 10-15USD, it seems to cost a bit more now, it cleans the ELB's pretty good.
I saw a chat on cleaning ELB's and I wanted to share.
I use this to clean the ELB's
I got it from aliexpress a while ago, you can still find it there and on ebay, 10pcs, I got like 100 in total for 10-15USD, it seems to cost a bit more now, it cleans the ELB's pretty good.
m0sh
Singer Song Writer Stoner
I'd love a Calyx, but I can't get it because I can no longer buy any related EVO accessories due to shipping...
MonkeyTime
Well-Known Member
PIU has their version called the Sipper, half the price and I think it's identical. Do they ship to your area?
I had both the 14mm and 18mm versions and loved the smaller for a lot of vapes until it broke. Next time I order from PIU they'll be two more added. There's always DHGate too if you have patience....
Agreed on the cleaning, but not any worse than a number of pieces I use regularly until you let them get bad.
m0sh
Singer Song Writer Stoner
I'll check it out, hopefully they do ship, but I think not :/
I had gotten stuff from dhgate, i have no issues, just would love good ones from there (one little HT and one regular)
m0sh
Singer Song Writer Stoner
So I decided to put the backup unit back in rotation, it makes sense if I test if from time to time, make sure it still works...its the original indiegogo unit, and it whistles like a MF! I forgot how loud it could get, my new Evo doesn't really whistle, maybe I'll record the differences, its pretty crazy.
Do it! Send a video brother
m0sh
Singer Song Writer Stoner
Alright, just loaded both of them, will load 2 ELB's and show the difference, I wonder how, I can I upload? only YouTube?
One more thing, the OG unit seems to be running hotter, I actually coughed quite much, I like noon setting on the new device, but I do wonder how can I get to noon position like the old unit? I hope iots not more than 1 TBH.