TinyMight / TM 2

Vaporific

All who wander are not lost...
I think this has been covered quite a bit. There is only Walnut. Whether the Walnut unit is dark or light, or both is luck of the draw.

They are going to release a limited batch of purple heart. If you are interested, email TM direct and ask to be put on the Red email list.
I supposedly am number one on the red list. And a few others claim they’re number one too, lol. Promises, promises. Walnut may indeed be the (only) other wood species beside purpleheart; still unsure if there’s a third one. It’s all a bit muddled now with speculation and the original TM2 promo pic and different color pics on the French site (but no color selection option). We’ll see, and wait… :peace:
 
Vaporific,

RedZep

Well-Known Member
I supposedly am number one on the red list. And a few others claim they’re number one too, lol. Promises, promises. Walnut may indeed be the (only) other wood species beside purpleheart; still unsure if there’s a third one. It’s all a bit muddled now with speculation and the original TM2 promo pic and different color pics on the French site (but no color selection option). We’ll see, and wait… :peace:
No we are sure. There is no speculation. Someone asked the producer. There is only Walnut and upcoming purple heart.

Could be other tropical woods in the future. But at this juncture in time it's barely worth speculating on. Anyone waiting for a third wood option before they pull the trigger might witness the end of society before they get a TM2 in their hands. I wish I was being facetious.
 

WisePenny

unknown. unmember.
No we are sure. There is no speculation. Someone asked the producer. There is only Walnut and upcoming purple heart.

Could be other tropical woods in the future. But at this juncture in time it's barely worth speculating on. Anyone waiting for a third wood option before they pull the trigger might witness the end of society before they get a TM2 in their hands. I wish I was being facetious.

I think the point that @Vaporific is getting at is that some early hype photos of the TM2 pre-release had 3 wood tones - somewhere back in the thread the photos are posted - one looked to be the lighter oak colour, then the walnut , and of course the reddish purpleheart.

I'd say the photos on that french site though are just the walnut in different lighting conditions.
edit:
photo here and this one too.
 
Last edited:

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
If I understand what you are suggesting, travel mode (heat disabled) would be zero. Easier for folks to get the function intuitively...

Yeah, although there was someone here who couldn't figure out why theirs was not turning on at level zero lol remember with the original TM, once you turn it on, you can turn it down all the way to the lowest possible, I have not tried to take a hit at level zero in my TM2 yet but I have started just above that...
 

Djsleepy

Well-Known Member
Yeah, although there was someone here who couldn't figure out why theirs was not turning on at level zero lol remember with the original TM, once you turn it on, you can turn it down all the way to the lowest possible, I have not tried to take a hit at level zero in my TM2 yet but I have started just above that...
@Shit Snacks ahem kinda beating around the bush aren’t you? A little here a little there; c’mon man what do you think about it’s performance?!??!,?!??! :shrug::shrug::shrug:
 
Anyone know where I can get rimless baskets in the US, they seem to be out of stock everywhere? Should I just form my own? That thick wall stem I'm planning to use will require baskets 1-2 mm smaller than usual but I figured rimless will squish a little. Same seller as eBay, there are options from 10 to 100 screens from Etsy.
From the same people as eBay on Etsy with opinions to purchase from, 10~100 screens. I brought 20 at $11.99. Should have them before the end of the week. Hope that helps 😊
 
Last edited:

4-Aces King-High

Well-Known Member
I got my rimless basket screens at same site.chinese- bought 10-good quality,comes in pipe cap 1/2”
I got my rimmed basket screens at chillumz.US Made,Excellent quality.
Works great with rimmed screen on End of TM2 OG short glass mouthpiece with rimless basket screen behind it .

I like the TM2 so much I preordered another !
My first one has been Ebonized. (tip from poster farmerpalmer-thanks) so hopefully I would like to end up with a dark Walnut .
V A S got me again ! Hopefully it will not get you! ?
 
Last edited:
I got my rimless basket screens at same site.chinese- bought 10-good quality,comes in pipie cap 1/2”
I got my rimmed basket screens at chillumz.US Made,Excellent quality.
Works great with rimmed screen on End of TM2 OG short glass mouthpiece with rimless basket screen behind it .
If you are medicating I find this setup saves on MM flower .
Thanx for the heads up! I’ll give the rimmed and rimless basket a go with the TM2 shortie glass stem. Let me see if I’ve got a handle on this, the rimless against the cooling unit, ground flower and the rimmed at the end where the heater is located? 🤔

That would be capital if this works out well. I’ve been favoring the TM2 shortie glass stem, as I find it the easiest one to get wonderful vapor at temps 4~6.. I’ve tried the 80mm TM2 stem and the 3" UPLINE® TASTER - CLEAR - BLACK LABEL, not tried the Ti stem yet, though it’s clean and ready to go.

Yeah, I feel ya. I am in amour with my lil TinyMight 2 and the honeymoon goes on and on. Perhaps at the end of the year l will order a second TM2. It’s such a beautiful lil vape to look at and a pleasure to hold. I’m still learning the in and outs of getting the most out of the TM2.

It such a treasure to have a community to come to share our fanaticism‘s with. I learn so much from my fellow ents here, perhaps when I gain some experience, I’ll be able to give back to the community. 😉
 
Last edited:

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
@Shit Snacks ahem kinda beating around the bush aren’t you? A little here a little there; c’mon man what do you think about it’s performance?!??!,?!??! :shrug::shrug::shrug:

Hahaha am I?!? Apologies dear sir that was not my intent at all :D I like to do many little posts as I go instead of one big write-up generally, but I may do one later on once I've had more time with it...? Ended the night with a one-hitter session mode style (the only way I use session mode, so I can fully clear my hit by turning it off) through the prophet (cloud connoisseur dry rig) before bed and I slept quite well actually! This morning back to the cherry poppers now in Alan 14mm WPA and (filthy) GVB hook:
PXL-20220928-205832142.jpg

Just such a nice experience with all these different dry glass pieces, have not tried stock set up with it though of course I should be testing that too... Oh yeah, to answer your question, the performance is still top tier, but now the tippy top, what more is to there to say? The best got better!!! :tup:
 

4-Aces King-High

Well-Known Member
No cooling unit - feels like the old days of com-busting,

Addendum to my previous post - pic option not conducive .

The original set up was kind of hot so I added some pieces to lengthen the setup for cooler vape.

pic option not accepting my input.

I added; 1)WPA-14mm on one end and 10mm other end to insert into the OG TM2 short glass -rimmed and reg. Basket with silicone gaskets .
2) a short 1-1/2”piece of silicone tubing to stretch over the spa 14mm end then
3) Ditanium mouthpiece with tapered lip-end.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
pic option not accepting my input

It doesn't work, there is no image hosting here anymore, you have to post to an external image hoster like imgur (I use desktop view on my phone mobile browser to upload and then just paste the URL here to display as an album if multiple photos) or imgbb (I go to the regular view on my mobile browser to upload and then just paste the bbcode here, only what is in the IMG brackets, for single photos)
 

4-Aces King-High

Well-Known Member
It doesn't work, there is no image hosting here anymore, you have to post to an external image hoster like imgur (I use desktop view on my phone mobile browser to upload and then just paste the URL here to display as an album if multiple photos) or imgbb (I go to the regular view on my mobile browser to upload and then just paste the bbcode here, only what is in the IMG brackets, for single photos)
Thanks always appreciate help.
I have tried many combinations to get that perfect setup for flavor,cooling and ‘hit’ with the TM2 and still searching .
At the point that will try all parts on hand and see how that works out . Always learning . Cheers!
 
Last edited:

RustyOldNail

SEARCH for the treasure...
Ended the night with a one-hitter session mode style (the only way I use session mode, so I can fully clear my hit by turning it off)

You confused me twice in one sentence, congratulations…. :)

#1) How do you do a “one-hitter” in a TM? Are you making your bowl size smaller, increasing your inflate time limit, and or going to a high temperature #______?
#2) As you know, you can turn it off faster in on demand mode by releasing the button, instead of the multiple presses in session mode.

I know you know the TM better then most, as it’s our current favorite, so I’m sure I’m missing something or perhaps the overall content. I read most of your posts, and occasionally skim them, as I know they are accurate, helping others. So in this case, I’m confused, and had to write, but I’m always willing to learn something new.

Don’t have a TM2. I’m holding out with @Vaporific until we get our dam RED color wood, even if it’s spray painted over PINE!
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
You confused me twice in one sentence, congratulations…. :)

I do have quite a way with words :lol:

#1) How do you do a “one-hitter” in a TM? Are you making your bowl size smaller, increasing your inflate time limit, and or going to a high temperature #______?

Correct in a sense, I've talked about this in the past, it doesn't really have to be a smaller bowl per se with the TMs power depending on the size of your hit (there's a reason I only take one hit at each turn of the dial normally) so the size of the bowl is more related to the size of the hit I want... Most often it will be a bit smaller than my normal temp stepping bowl, that is true however!

The key is starting at the higher temperature, I think of the dial as speed of extraction a lot of the time, so as I've said in the past I would use session mode at a level closer to my finishing level (ie around level 5.5-6.5 depending on the TM) so it is just one hit through water, for a simple fast effective extraction (herbal dab style!)

I'm not entirely sure what you mean by increase my inflate time limit, though I think you might mean length of inhale, and that might be correct as well... I don't think of it necessarily as a rule it's whatever is in the moment for me, but I would say usually I do try to take a longer deeper hit for this style, and through a water piece or dry rig you can watch the vapor thin out during your hit to know when it is extracted.

#2) As you know, you can turn it off faster in on demand mode by releasing the button, instead of the multiple presses in session mode.

Of course I am aware as you say, however that requires that you hold the button down during the entirety of your hit. For me the benefit of session mode, is that it is holding the button down for you, the problem is that you are unable to clear your hit of vapor and heat this way, so I only use it for a one hitter bowl that I will turn off mid-hit near hit completion to finish and fully clear all the vapor from everything!

I know you know the TM better then most, as it’s our current favorite, so I’m sure I’m missing something or perhaps the overall content. I read most of your posts, and occasionally skim them, as I know they are accurate, helping others. So in this case, I’m confused, and had to write, but I’m always willing to learn something new.

Thank you for the kind words my friend, it's been a while since we engaged directly here as we used to much more frequently! And I understand I can often word things in a way that makes sense to me, but not to others especially when you're reading it out, also very verbose and easy for you to skim or miss something even if I was clear about it lol

Don’t have a TM2. I’m holding out with @Vaporific until we get our dam RED color wood, even if it’s spray painted over PINE!

It's all possible I never even covered it so precisely, although I feel like I have, it's hard to know how to descriptive to be... Anyway hope this helps!

So glad I took the leap on walnut since I got such a pretty one at such a great price! I hope it's a while before red comes out, and honestly you guys are good for being patient, you're not actually missing anything you're not aware of, capability you have what you need. A classic direct upgrade without diminishing the original is very promising for this brand I hope for a long future!!
 

RustyOldNail

SEARCH for the treasure...
I do have quite a way with words :lol:



Correct in a sense, I've talked about this in the past, it doesn't really have to be a smaller bowl per se with the TMs power depending on the size of your hit (there's a reason I only take one hit at each turn of the dial normally) so the size of the bowl is more related to the size of the hit I want... Most often it will be a bit smaller than my normal temp stepping bowl, that is true however!

The key is starting at the higher temperature, I think of the dial as speed of extraction a lot of the time, so as I've said in the past I would use session mode at a level closer to my finishing level (ie around level 5.5-6.5 depending on the TM) so it is just one hit through water, for a simple fast effective extraction (herbal dab style!)

I'm not entirely sure what you mean by increase my inflate time limit, though I think you might mean length of inhale, and that might be correct as well... I don't think of it necessarily as a rule it's whatever is in the moment for me, but I would say usually I do try to take a longer deeper hit for this style, and through a water piece or dry rig you can watch the vapor thin out during your hit to know when it is extracted.



Of course I am aware as you say, however that requires that you hold the button down during the entirety of your hit. For me the benefit of session mode, is that it is holding the button down for you, the problem is that you are unable to clear your hit of vapor and heat this way, so I only use it for a one hitter bowl that I will turn off mid-hit near hit completion to finish and fully clear all the vapor from everything!



Thank you for the kind words my friend, it's been a while since we engaged directly here as we used to much more frequently! And I understand I can often word things in a way that makes sense to me, but not to others especially when you're reading it out, also very verbose and easy for you to skim or miss something even if I was clear about it lol



It's all possible I never even covered it so precisely, although I feel like I have, it's hard to know how to descriptive to be... Anyway hope this helps!

So glad I took the leap on walnut since I got such a pretty one at such a great price! I hope it's a while before red comes out, and honestly you guys are good for being patient, you're not actually missing anything you're not aware of, capability you have what you need. A classic direct upgrade without diminishing the original is very promising for this brand I hope for a long future!!

Thanks for the reply. A lot to digest in my current state, but I’ll save the notes, to try!
 

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
I supposedly am number one on the red list. And a few others claim they’re number one too, lol. Promises, promises.
I've been told that the number on the list doesn't really matter. Everyone on the list will get a RED TM2,in case the list gets bigger than the production capabilities for the batch it will be closed . That doesn't mean that the list didnt started with you ;) !
Also steps into the direction have been made. New PH wood is on the way and if quality checks out ,production can be initiated .
 

sickmanfraud

Well-Known Member
From the same people as eBay on Etsy with opinions to purchase from, 10~100 screens. I brought 20 at $11.99. Should have them before the end of the week. Hope that helps 😊


50 screens for $5.05 plus shipping
 

MoltenTiger

Well-Known Member
Pretty stoked. I was about to buy the TM but when I saw the TM2 upgrades I had to have it instead. I should have already bought the TM long ago, but as it turns out it all worked out swimmingly.

I emailed a shop who happened to be waiting on their limited supply of TM2s here in Aus. They're still not listed online yet but they received them a couple of days ago, a couple days after I emailed, now one is on the way to me with a WPA . Super lucky, but probably not lucky enough to receive before the weekend, ETA is Monday...

I've been enjoying some FMJ Dynavap rips which I'm finding a very snazzy and effective set up, quite impressive output considering. Outstanding value.

My electrical portables are all a bit weak though. I'm hoping this fairly expensive TM2 brings the power and convenience which I have been missing since my Hopper io fleet all cooked it.

This thing looks to be about the best vape for me, pretty excited to try it out.
 

Lennyyyyy

Member
I've been told that the number on the list doesn't really matter. Everyone on the list will get a RED TM2,in case the list gets bigger than the production capabilities for the batch it will be closed . That doesn't mean that the list didnt started with you ;) !
Also steps into the direction have been made. New PH wood is on the way and if quality checks out ,production can be initiated .
Today they sent me a mail regarding my request to be included in the list for RED TM2

“hi! thank you so much, we don't have numbers on this list, it is just a list and we will send notification email once we have news about the Purple heart version! thank you so much, you are now on the list”

I appreciated their courtesy
 

VegNVape

Increase the Peace
Company Rep
Pretty stoked. I was about to buy the TM but when I saw the TM2 upgrades I had to have it instead. I should have already bought the TM long ago, but as it turns out it all worked out swimmingly.

I emailed a shop who happened to be waiting on their limited supply of TM2s here in Aus. They're still not listed online yet but they received them a couple of days ago, a couple days after I emailed, now one is on the way to me with a WPA . Super lucky, but probably not lucky enough to receive before the weekend, ETA is Monday...

I've been enjoying some FMJ Dynavap rips which I'm finding a very snazzy and effective set up, quite impressive output considering. Outstanding value.

My electrical portables are all a bit weak though. I'm hoping this fairly expensive TM2 brings the power and convenience which I have been missing since my Hopper io fleet all cooked it.

This thing looks to be about the best vape for me, pretty excited to try it out.
Hey man, nice to see you here - it seems to partly be a HL afflicted recovery group so I think you're in good company.

I hope you enjoy your TM2, it's still early days with mine but I'm having a wicked time & the contrast in signature compared to others in rotation puts a mellow smile on my face everytime I even think about it :smug:

:peace:
 
Top Bottom