RustyOldNail
SEARCH for the treasure...
That's not ergonomic, that's for knocking over a convenience store!
No..... it was a DISPENSARY...
That's not ergonomic, that's for knocking over a convenience store!
No..... it was a DISPENSARY...
That's not ergonomic, that's for knocking over a convenience store!
Good choice. I like it mine best with a j-hook or bubbler. The only accessory I'd insist on would be a wpa: I prefer the flavor of a glass airpath and only use the included short stem for vaping outFuck it, it's the 11th hour. Last night was very much NOT a good health related night. Ordering.
Guys, I seem to be getting conflicting reports though in my very very minimal searching - is this a 14mm or 16?? I think 16, correct?
Edit : Nevermind, found this...........sweet!
Other brands of Accessories that fit the TinyMight.
My Tinymight will be arriving on Tuesday and I am already thinking about what aftermarket upgrades (stems or WPA). I know some splinter stems work but I’m not sure which ones. Any information would be helpful and appreciated. I am new here so hopefully I’m doing this right.fuckcombustion.com
If you need this for medical I can promise you it’s a solid devilce that is my daily driver.Fuck it, it's the 11th hour. Last night was very much NOT a good health related night. Ordering.
Guys, I seem to be getting conflicting reports though in my very very minimal searching - is this a 14mm or 16?? I think 16, correct?
Edit : Nevermind, found this...........sweet!
Other brands of Accessories that fit the TinyMight.
My Tinymight will be arriving on Tuesday and I am already thinking about what aftermarket upgrades (stems or WPA). I know some splinter stems work but I’m not sure which ones. Any information would be helpful and appreciated. I am new here so hopefully I’m doing this right.fuckcombustion.com
If you need this for medical I can promise you it’s a solid devilce that is my daily driver.
Low temps-terps and some clouds!
High temps -clouds and some terps! It’s fun to temp step with! Enjoy! Welcome to the the group
The only accessory I'd insist on would be a wpa
…in space!
aaaaand, here we have the only accessory I don't use, lol. Just not a water guy.
The WPA is not just for water use
Oh come one, prove to me that's not Ernest Borgnine's younger brother, lol!
where'd you get that glass?You know that feeling where it's difficult to open your eyes after a huge hit... yea this combo just got me there Happy Sunday
where'd you get that glass?
Does @Shit Snacks play sax? He’s got a PhD in glass for crying out loud .I must be going crazy...
There's one thing that happens to me every time I see these huge stems. As soon as I open these images, I start to hear some saxophone notes. ..at first I thought I had spotify running in the background.
...does this happen to anyone else?
Just thought I’d let you all know in case anybody finds themself in my shoes. My order arrived yesterday the 16th of August so if your order parts to Australia expect a long wait. They’re coming by sea.Hey everyone, long time lurker. This thread convinced me to buy the beast from Finland and I couldn’t be happpier with the vape. Need some help though. A while back I ordered some accessories (4th of June 21). Im still waiting for these accessories (25 July), the last tracking event says cleared and awaiting international departure. The items are coming to Australia. I contacted Tinymight via email in late June and he said wait times for accessories have been longer than usual due to COVID. Has anybody else ordered acccessories recently and had them take months to arrive? Wondering if I need to be concerned these may have gone missing. I did send a follow up email about a week back but didnt hear anything back from him.
Surprising because my tinymight itself arrived within 2 weeks of ordering but I understand that was shipped via a parcel and the accessories get shipped as a letter. Sorry about the wall of text.
I must be going crazy...
There's one thing that happens to me every time I see these huge stems.
Does @Shit Snacks play sax? He’s got a PhD in glass for crying out loud .
Hi tinymight fans.
Nicholas, of vaporisateur has made me a WPA for my tinymight.
I didn't like the multi size WPA so asked Nicholas to make me one and offer it to the community.
He made the first batch too long, at 8cm but the second batch will be 6 cm.
The 8cm batch is only available in 14 mm. Future batches at 6 cm will be available in both 14 and 18 mm.
Prices for the current batch (8 cm in 14mm) are:
5 Euro if purchased with a j hook.
8.50 euros if purchased on its own..
Next batch at 6 cm long in either 14 or 18 will be priced at 17.90 euros. I'm unsure if a discount will be offered if buying with a j hook but I expect there will be (I'm waiting on Nicholas to confirm).
These need a basket screen. The current batch internal diameter is slightly too big for the cu unless the o rings are changed to those used with mighty or crafty. I have informed Nicholas of this and he will investigate in September when the glass blowers return. Please consider this if you plan to use the og cu with these. I don't but some might......
I much prefer this to the multi version as it sits better in the joint. And whilst the 8 cm is a tad too long it is still stable in a rig.
I think these are an improvement, especially with the prices he is asking.
Contact details:
customglass@vaporisateur.net
Obligatory pictures:
View attachment 11749
View attachment 11750
View attachment 11751
View attachment 11752
Best check with Nicholas re postage.I would love a 14mm in the 6cm size. Shipping to US?
NICE WORK on this. I have the TM OG but never use it, 18mm with the glass screen. Didn’t like the multi joint version.
I definitely like the look of that oneHi tinymight fans.
Nicholas, of vaporisateur has made me a WPA for my tinymight.
I didn't like the multi size WPA so asked Nicholas to make me one and offer it to the community.
He made the first batch too long, at 8cm but the second batch will be 6 cm.
The 8cm batch is only available in 14 mm. Future batches at 6 cm will be available in both 14 and 18 mm.
Prices for the current batch (8 cm in 14mm) are:
5 Euro if purchased with a j hook.
8.50 euros if purchased on its own..
Next batch at 6 cm long in either 14 or 18 will be priced at 17.90 euros. I'm unsure if a discount will be offered if buying with a j hook but I expect there will be (I'm waiting on Nicholas to confirm).
These need a basket screen. The current batch internal diameter is slightly too big for the cu unless the o rings are changed to those used with mighty or crafty. I have informed Nicholas of this and he will investigate in September when the glass blowers return. Please consider this if you plan to use the og cu with these. I don't but some might......
I much prefer this to the multi version as it sits better in the joint. And whilst the 8 cm is a tad too long it is still stable in a rig.
I think these are an improvement, especially with the prices he is asking.
Contact details:
customglass@vaporisateur.net
Obligatory pictures:
View attachment 11749
View attachment 11750
View attachment 11751
View attachment 11752
Try a different cable and wall plug if you can to troubleshoot. I’ve never had an issue though I’ve only charged my TM directly 3-4 times in the 18 months I’ve had it and it charged fine this way. I mainly charge my batts externally. Good luck.Anyone's TM stop charging through USB? I'm not really worried since I charge them externally, but its nice to have the option. I was thinking of doing a teardown and cleaning everything inside. Any thoughts?
I’ve tried other cables and plugs with no luck. Guess I’ll take it apart. Thanks!Try a different cable and wall plug if you can to troubleshoot. I’ve never had an issue though I’ve only charged my TM directly 3-4 times in the 18 months I’ve had it and it charged fine this way. I mainly charge my batts externally. Good luck.