Discontinued The Grasshopper
- Thread starter midgetsanchez
- Start date
kingfisher
Well-Known Member
Update on my 2 of 8 dead batteries... not charging.
Sent warranty request July 29th. Got responses beginning today.
Caroline at first said to send in unit, batteries, and charger bc it seemed like a device draining the battery too soon issue.
I asked, politely, for her to take a closer look bc that was not at all the problem. Also I didn't want to send the unit in for $10 if it wasn't absolutely necessary.
She apologized for the mistake and is sendING me 2 new batteries!
Sent warranty request July 29th. Got responses beginning today.
Caroline at first said to send in unit, batteries, and charger bc it seemed like a device draining the battery too soon issue.
I asked, politely, for her to take a closer look bc that was not at all the problem. Also I didn't want to send the unit in for $10 if it wasn't absolutely necessary.
She apologized for the mistake and is sendING me 2 new batteries!
As far as images are concerned, here is how you post them here: http://fuckcombustion.com/threads/how-to-post-pictures.155/
JoeMama
Well-Known Member
As far as images are concerned, here is how you post them here: http://fuckcombustion.com/threads/how-to-post-pictures.155/
Thank you, Sir! That was really helpful and easy to do! Ain't no stoppin me now!
Vapor_Eyes
taste buds
I didn't know that, thanks for the info!
Vapetrees
Vaped Out
Just hopping in to say I used my grasshopper with over 10 people hitting it back to back without turning it off. I started it at the lowest temperature and Everyone was able to get 2 hits once I turned it all the way up to temp 5. We used it this way for about five bowls back to back. I went through about 3 batteries and had to stop since that's all I had brought with me. A lot of my friends were skeptical about it and once they were all toasty, they couldn't believe a "pen" could do that. However, I had ordered a bronze Ti and that once started messing up by not showing the red light when it's heating up, and suddenly it stopped heating and it turns itself off. The purple Ti that I shared with my friends is working really well ever since I got it from Vapefiend at the beginning of the year, just checked and I got it in April.
kingfisher
Well-Known Member
As far as images are concerned, here is how you post them here: http://fuckcombustion.com/threads/how-to-post-pictures.155/
Guess I created the wrong type of link...? Followed the instructions but I do not know what bb code is..?
I'll try again.... still don't see anything that says bb link or bb code when I go to the "share" options in imgur.
I had previously tried to "copy link" From imgur.com and embed it into the forum. That for some reason gives a broken link symbol.
Vapor_Eyes
taste buds
Where it says link on the top of the imgur page is actually a menu. You need to change it to direct link.
slcbdco
Brewer, Lobbyist, Vaporist
#Grasshopper"Problems"
JoeMama
Well-Known Member
Haha
... If I may.... #GrasshopperGripes
moondog
It's an obsession but it's pleasin'
JoeMama
Well-Known Member
Now if I only had a twitter account.
But we digress....
@Vapor_Eyes , I do believe I like the tiny amounts, as you suggested. And while I don't seem happy with a T3, 3.5 seems to be a nice starting point, on up to 5 on the final shot.
I'm impressed by the efficiency of convection, this thing is (so far) rock solid.
MonkeyTime
Well-Known Member
That does look great! Can I ask what sort of heat shrink it is and what it's intended for normally? I might want that for my plain Ti....Got my ss and ti hoppers last week! Love the ss, haven't tried ti yet.
I use heatshrink for the body, no scratch and adds color, less slippery
Last edited:
Hoey420
Well-Known Member
The link below was the one I used, sorry I don't remember the size, will find out when am back at work tomorrow Ihad to use long nose pliers to open it up to slip it over our hopper.
http://www.narva.com.au/products/browse/tubing-dispensers
Ihad to use long nose pliers to open it up to slip it over our hopper.http://www.narva.com.au/products/browse/tubing-dispensers
The future is here! 
I've seen't it! 
I've held them in my hands!
Now if only I could haves a 19/18mm one....
Seriously. Had them for a while now. Ti n green ti. Green scratched super easy screwing battery in from the stupid clip... So yeah anadizing is super thin... Lesson learned, be careful! Definitely can't complain. Yo, less then 200 and almost a log. That's right, it can hang!
Like dang... 
Well worth the wait, was just worried they'd fold before getting enough units out to prove it's real before every one gets too impatient.
Seriously with a life time warranty?
Only thing is, I absolutely wish I could turn off the leds at night... can put in sleeve or hide in hands well enough I guess.
Only two criticisms I can come up with... I mean yeah battery life isn't grate but they are alright, cheap, and charge fast (externally) and easily changed.
Oh and check this tomo charger (or white cheaper one) out.
I've seen't it! I've held them in my hands!Now if only I could haves a 19/18mm one....Seriously. Had them for a while now. Ti n green ti. Green scratched super easy screwing battery in from the stupid clip... So yeah anadizing is super thin... Lesson learned, be careful! Definitely can't complain. Yo, less then 200 and almost a log. That's right, it can hang!
Like dang... Well worth the wait, was just worried they'd fold before getting enough units out to prove it's real before every one gets too impatient.
Seriously with a life time warranty?
Only thing is, I absolutely wish I could turn off the leds at night... can put in sleeve or hide in hands well enough I guess.
Only two criticisms I can come up with... I mean yeah battery life isn't grate but they are alright, cheap, and charge fast (externally) and easily changed.
Oh and check this tomo charger (or white cheaper one) out.
WoodyWeedPecker
Well-Known Member
There's bigger and serious Grasshopper problems when you have one of the defective units...
Justpassedu
Well-Known Member
I cant read through the entire thread to diagnose my problem . I had the hopper a few weeks now , i dont abuse it and use it sparingly. I would say now after using the batteries roughly 4-5 charges each they now only last about 10 hits for me at a temp of about 3.5-4 . Is this normal ? Or do i possibly have a problem somewhere ? My hopper also doesn't produce vapor at 3 or below and at any temp it takes me about a 15-20 second pull to get some cloudage. I am wondering if these things are normal ?
Hogni
Honi soit qui mal y pense
Of course Rachett's leather case is already on my GH-gadget-list aside of most of his nice other GH-gadgets
Hope GH's SS-case will come back. Its useful and has a nice and clear design IMO.
Have read somewhere there are some probs with scatches on GHs while using it. Seems to me no big issue to overwork the inlay to prevent this?
Vapor_Eyes
taste buds
I get about 10 hits on temp 4, and little visible vapor below temp 3, so those aren't too different from normal I believe.
I can get decent clouds with a 5 second pull, definite thick visible vapor. Any convection vaporizer will give you bigger clouds the longer you pull. If you have to pull 15-20 seconds it sounds like something might be wrong.
I usually hit my hopper for 20 seconds or more but I've timed 5-10 second hits and got decent clouds.