JoeMama
Well-Known Member
True, Sir! That's why I'm looking forward to hearing his experience with both. I'll let ya know how that goes.
Discontinued The Grasshopper
- Thread starter midgetsanchez
- Start date
kbrown5523
Hopping in Washington
No, but I recently flew with my Focus Analog and they couldn't care less. I was going to throw it away after using it and not bring it back with me, but they totally don't care. Domestic flights anyway.
Hjalmark
Oldest boy alive
Ppppffff...
I payed for pretty cheap shipping to hopper labs that took 6 days but the shipping rate they payed for shipping it back is beyond cheap ... I think I will send a 5 dollar bill with my next warranty service and ask them to send it at least "priority"
Edit:
NEVER MIND!!!
It came today and in 5 days instead of 6 days that took my express shipping from Scandinavia
Fucking hopper labs can't even let me bitch about return times
But time for lunch followed with a hopper run
I payed for pretty cheap shipping to hopper labs that took 6 days but the shipping rate they payed for shipping it back is beyond cheap ... I think I will send a 5 dollar bill with my next warranty service and ask them to send it at least "priority"
Edit:
NEVER MIND!!!
It came today and in 5 days instead of 6 days that took my express shipping from Scandinavia
Fucking hopper labs can't even let me bitch about return times
But time for lunch followed with a hopper run
Last edited:
Yep, flown Toronto-Barcelona, Bilbao-Dubrovnik, Dubrovnik-Barcelona and return to Toronto. GH in carry on, no issues....
moondog
It's an obsession but it's pleasin'
My pyramid stand and funnel should be here by the end of the week woo!
Most expensive funnel I've ever bought but it will be worth it
You will find that it is WAAAY more than just worth it. Ratchett's accessories (I've got the spiral stand, charger stand, dual mini funnel, battery caps, doob tubes, leather case, mini poke/scoop tool, water tool adapter, and cleaning plugs) are so integral to my daily hopper rituals that my experience of the my hoppers would be greatly diminished without them.
GHL and Delta 3D should team up in some sort of superhero comic book-type crossover event. I'd see that blockbuster summer film with hopper firmly in hand.
Yeah, I just woke up and I'm a bit goofy.
Speaking of doob tubes, I'd love to cut down a couple of mine to 1/2 size so they can fit in Ratchett's leather case. Do any of you have suggestions on how to cut them down so as to minimize the amount of shavings that will be peeling off the edge afterwards? I want to avoid having plastic shavings getting mixed in with the tubes' contents.
@JoeMama, I too will be most interested in hearing about your friend's experience as I continue to cautiously dance around the idea of a FW4 as my convection session portable.
Mr Mellish
Well-Known Member
I'm not @JoeMama but I have had zero issues with the battery cover. If you position it properly before sliding it on, it moves easily on (and off). Personally, I'm more concerned about the upper battery terminal. It hasn't happened yet but it looks like sliding a battery in and out may loosen or break it over time.
Gramin
Well-Known Member
Just noticed a crack on my backend 
A week old and I find this!!! I'm a bit sad atm...
I'm assuming it's a crack because it's not straight. Looks a lot like the crack a member had recently on their charging cable.
So I'm taking a stab and saying that bit is magnetic too? If I actually used the cable I might find it not working too well.
Hopper still performs well and I'm exclusively external charger so hopefully this is only cosmetic and doesn't deteriorate further. Hell why do we external chargers even need this bit anyway. Is it not attracting dirt to the threads?
A week old and I find this!!! I'm a bit sad atm...
I'm assuming it's a crack because it's not straight. Looks a lot like the crack a member had recently on their charging cable.
So I'm taking a stab and saying that bit is magnetic too? If I actually used the cable I might find it not working too well.
Hopper still performs well and I'm exclusively external charger so hopefully this is only cosmetic and doesn't deteriorate further. Hell why do we external chargers even need this bit anyway. Is it not attracting dirt to the threads?
Last edited:
JoeMama
Well-Known Member
No issues, Duff. As @Mr Mellish says, you just have to position it properly and it slips right on. I like the design and the simplicity of this thing.
slcbdco
Brewer, Lobbyist, Vaporist
I've used mine in the airplane bathroom, a less fun twist on mile high club
btka
Well-Known Member
can not see the crack....can you explain where?Just noticed a crack on my backend
I'm assuming it's a crack because it's not straight. Looks a lot like the crack a member had recently on their charging cable.
So I'm taking a stab and saying that bit is magnetic too? If I actually used the cable I might find it not working too well.
Hopper still performs well and I'm exclusively external charger so hopefully this is only cosmetic and doesn't deteriorate further. Hell why do we external chargers even need this bit anyway. Is it not attracting dirt to the threads?
Southern Chef
Well-Known Member
Looks like lower left in that indentation...at about 7:30.
JoeMama
Well-Known Member
Wow, yep, that sure looks like a crack. Glad that it still works, though! And you just found that? (ie, did you drop it or...??)...Just noticed a crack on my backend
I'm assuming it's a crack because it's not straight. Looks a lot like the crack a member had recently on their charging cable.
So I'm taking a stab and saying that bit is magnetic too? If I actually used the cable I might find it not working too well.
Hopper still performs well and I'm exclusively external charger so hopefully this is only cosmetic and doesn't deteriorate further.
Two words: Lifetime Warranty.
You win the Big Balls Award!
Last long distance flight I was on, I'd taken some edibles. That's how I rolls.
Baron23
Well-Known Member
Next time you do this, carry a LOT of bail money.
Gramin
Well-Known Member
I have knocked it a few times from leaning up against my glass. So not much of a drop but it appears to be enough to break the magnet.
My own fault
almost there
Well-Known Member
that must be the bravest thing I've heard in a while. I personally would be so paranoid and worried there would be no way for me to actually enjoy it. It must have been a very low temp quick hit? How'd you carry it off?
Mr. Me2
Well-Known Member
You obviously never watched Harold and Kumar Escape from Guantanamo...
vapviking
Old & In the Way
Guess they're almost all caught up with the backlog. That's great!Just receive my adress confirmation e-mail for my SS Grasshopper and 3 extra batteries!! Order on Jan 28!
And my new Nitecore D4 is on my way too!
Now they'll finally have some time to tan some hides and get to sewing up some leather sleeves. Mine is six months late. It's one of the inexplicables of the Grasshopper saga.
formicae
Well-Known Member
My Ti hopper shipped with a leather sleeve yesterday.
I'm curious to see if I get the free extra battery that was offered when I ordered, there's no mention of it in the packing list.
moondog
It's an obsession but it's pleasin'
Not necessarily. When I got my hoppers (back in November), my invoice listed the leather sleeve as part of the shipment but it was not in the package. Now it may be that they are now indeed shipping, but I would think that GHL would be announcing that if that was the case since so many of us have been waiting for so long. Here's hoping you do indeed get yours because that's good news for the rest of us.
Bass Vaper
Well-Known Member
I have a number of times (with all 4) as well. No issues as long as in your carry on. Can't be baggage checked per airline rules.
I did use my Speak Easy 710 oil pen on the plane in my seat and restroom. Best flying ever.
vapviking
Old & In the Way
Please let us know how that story unfolds.
