Discontinued The Grasshopper

[studmuffin]

Greetings all HopperHeads and wannabees,

There is much chatter, and rightfully so, about the concern for always having a charged battery in order to achieve Hoppertudeness. As I wait patiently in pre-order purgatory, I have already solved the battery dilemma. Instead of a cache of batteries and external chargers, which require AC current, I am going to power-up by tapping into the Universe's largest nuclear reactor. That's right. The sun.
SNAP. I am part of a Kickstarter campaign created by an engineer and an artist: Little Sun Charge. Basically, it is a stand-alone solar charger/light, with USB power outlets for charging anything, really. Think about it: in a small compact unit you have the unlimited capability to recharge your Grasshopper. Anywhere. Anytime. They are not quite on the market yet, but check this out on YouTube.

 

[zymos]

I'm going to find a tiny brush. Stuff gets stuck in the oven, and I don't trust the durability enough to tap it as hard as I would need to to dislodge the residue. At least with the mouthpiece I can blow on it and get it somewhat cleared.

 

[blankexpression]

Another Kickstarter campaign? Not on your nelly my friend, after the frustrating wait a lot of us have had I dont think its going to receive much love in this thread

 

[SlinginPaint]

I'm going to find a tiny brush. Stuff gets stuck in the oven, and I don't trust the durability enough to tap it as hard as I would need to to dislodge the residue. At least with the mouthpiece I can blow on it and get it somewhat cleared.

I like to use a Q-tip right after a session if its getting dirty. Its really easy to wipe out while still warm.

I'll carefully put the Q-tip in the oven slowly until it touches the screen slightly. Then I rotate the hopper as I press the Q-tip against the wall of the oven, and slowly draw the Q-tip back out.

EDIT: This will not help with residue stuck in the oven screen.

 

[Justpassedu]

Greetings all HopperHeads and wannabees,

There is much chatter, and rightfully so, about the concern for always having a charged battery in order to achieve Hoppertudeness. As I wait patiently in pre-order purgatory, I have already solved the battery dilemma. Instead of a cache of batteries and external chargers, which require AC current, I am going to power-up by tapping into the Universe's largest nuclear reactor. That's right. The sun.
SNAP. I am part of a Kickstarter campaign created by an engineer and an artist: Little Sun Charge. Basically, it is a stand-alone solar charger/light, with USB power outlets for charging anything, really. Think about it: in a small compact unit you have the unlimited capability to recharge your Grasshopper. Anywhere. Anytime. They are not quite on the market yet, but check this out on YouTube.

Solar chargers have been out for awhile and can be had for cheap on amazon , I have been using one for awhile now out in the sun over the summer to charge my portables. What makes your different from the others that are proven and out on the market? Having a light on it would only attract unwanted attention to me while vaping. I am not trying to come off rude so please take no offense just interested in what may make this better from, whats out on the market.

 

[MoltenTiger]

I'm going to find a tiny brush. Stuff gets stuck in the oven, and I don't trust the durability enough to tap it as hard as I would need to to dislodge the residue. At least with the mouthpiece I can blow on it and get it somewhat cleared.

Yeah, having a tool makes it easier to avoid impulsively blowing into the chamber.
This thing is so effective it's pretty hard to test. I am ripped.
I think if you try to session this vape, you will get too high. It really is a one hit and good kinda deal here. I'm beginning to trip out haha - haven't even tested kief yet, that's for before bed after this post. Today has been like a weird dream, it is awesome to finally have this thing.

 

[studmuffin]

Hello,
For those people who have even a niggling interest in Little Sun Charge, please watch the video to purchase a clue. Thanx.

 

[MoltenTiger]

I don't get why that guy has that bird, and what makes it so good.
I like technical breakdowns, but that was entertaining.

 

[tubasco]

I'm going to find a tiny brush. Stuff gets stuck in the oven, and I don't trust the durability enough to tap it as hard as I would need to to dislodge the residue. At least with the mouthpiece I can blow on it and get it somewhat cleared.

Stuff gets stuck in my hopper's chamber only when I let it cool while full.
I promise all of you: loose pack + empty it while hot = abv that gently slides out on its own.
I've found the Santa Cruz shredder is a happy middle ground (pun intended, ha) for grind consistency.
I tried space case grinder (too fine, better for conduction vapes) and just ripping bud with fingers (too chunky, not enough surface area, ESPECIALLY when using native...not to mention sticky fingers)
Amazon has glass test tubes with caps. Best combination loading/storage tool for the hopper's herb I've found.
For more discrete storage on the go check out Zipp Fizz tubes! Sorta like a doob tube but has an energy drink label on it. I LOVE my glass test tubes, but I'm gonna have to put stickers on them or something. They are obviously glass tubes with herb, lol...kind of kills the discretion that the hopper brings.

 

[Mister G]

someone posted this pretty nice nosecone video on reddit/yt:

 

[MoltenTiger]

someone posted this pretty nice nosecone video on reddit/yt:

Dank beats

 

[Krazzykid]

because i cant dab on it (so they say. but i bet it is possible if that plasticy thing is taken out) or get that golden reclaim out without ISO

Watch the video. You won't be able to remove the proprietary insulation in the mouthpiece and still have it function properly, the screen is a part of that piece. That piece also holds the inner cone in place. All you will be left with is a hollow mouthpiece that will heat up really fast and let all the herb be pulled into your mouth.

I'm pretty sure the heat from torching the mouthpiece will also warp the metal, possibly preventing it from screwing on again.

 

[tubasco]

I wanted to give everyone a cleaning "tip."
Google: Nail Tees. They are finely pointed, tightly wrapped cotton swabs that are GREAT for detailing the hopper. No straggler pieces of cotton from these. Great cleaning swabs!!

 

[hippogriff]

I have had the blue/red flashing lights a few times when first plugging into the magnetic charger - seems to go after a couple of seconds though and normal charging resumes (intermittent red blink).

I don't seem to be having any trouble with my unit - I hope this is not a sign that the end is nigh!

I had a similar issue - red/blue means temp overheating but this would happen at random times including trying to charge a cold hopper. Turning on/off helped sometimes, disconnecting/reconnecting the charging cable helped sometimes, but eventual fix was a replacement body from GHL. Hold out for shipping SS hoppers to preorders if you can to get the latest parts, then warranty.

Side note: finally unsubscribed from the grasshopper subReddit, thought it was useful for production tracking, but the constant down voting for just participating in conversations there got to me, feel much better w/o it, grateful for the FC community!

 

[Kalessin]

I had a similar issue - red/blue means temp overheating but this would happen at random times including trying to charge a cold hopper. Turning on/off helped sometimes, disconnecting/reconnecting the charging cable helped sometimes, but eventual fix was a replacement body from GHL. Hold out for shipping SS hoppers to preorders if you can to get the latest parts, then warranty.

Side note: finally unsubscribed from the grasshopper subReddit, thought it was useful for production tracking, but the constant down voting for just participating in conversations there got to me, feel much better w/o it, grateful for the FC community!

Yeah, reddit gets me sometimes too. I don't post there a whole bunch, but it's definitely strange how people will downvote entirely factual statements

 

[btka]

After some more bowls.. it's hard to say how I like to use it best. I was super keen for this for bubbler hits, but I'm not so sure it was exactly what I wanted there. Either way, I think I prefer hitting it natively, which has surprised me somewhat, it's just so tasty and good.

why aren´t your expectations fullfielld with gh bubbler hits... what is lacking...
because that was also one of the ways I intended to use my gh... and why do you prefer hitting it natively... a lot of people seem to like to use the gh with bubblers and I have seen videos really milking up bubbler with the gh and big nice clouds..

 

[JoeMama]

130C/266F
150C/302F
170C/338F
190C/374F
210C/410f

Thanks, Buzz!

 

[vapviking]

Greetings all HopperHeads and wannabees,

There is much chatter, and rightfully so, about the concern for always having a charged battery in order to achieve Hoppertudeness. As I wait patiently in pre-order purgatory, I have already solved the battery dilemma. Instead of a cache of batteries and external chargers, which require AC current, I am going to power-up by tapping into the Universe's largest nuclear reactor. That's right. The sun.
SNAP. I am part of a Kickstarter campaign created by an engineer and an artist: Little Sun Charge. Basically, it is a stand-alone solar charger/light, with USB power outlets for charging anything, really. Think about it: in a small compact unit you have the unlimited capability to recharge your Grasshopper. Anywhere. Anytime. They are not quite on the market yet, but check this out on YouTube.

I do love solar power. And I'm all for empowering (pun!) third world people. But I take issue with your enthusiasm about "unlimited" "anywhere" and "anytime". It won't work at night, that's half the time. It won't work if the sun don't shine, nor indoors unless near a window. And maybe the worst, according to the engineer at the end of one of the videos, they are happy you'll be able to charge your smart phone with A DAY of sunshine.
There are a bunch of portable solar rigs on the market, some with included battery storage, it is a rapidly expanding market, product-wise. I'm not seeing what might separate the Little Sun from other players in the market?
And yes, I've just followed you right down the off-topic trail!

 

[slcbdco]

@slcbdco have you been by the labs recently and seen/heard about the status of the S/S case? just wondering if i should cancel it and get extra batteries instead (although I do have 4 ordered with the GH...)
TY

I haven't been by in a few weeks though I mean to, I like hanging out with those guys but they and I have been pretty busy past few weeks. The cases are on TBD delivery last I knew but still be worked on.

Yeah that's what I was going for with the pinch's of bud. Best way to conserve flavour too, and it seems to vape it nearly just as efficiently. The whole chamber must be held at a precise temperature fairly accurately I assume. It's amazing.


After some more bowls.. it's hard to say how I like to use it best. I was super keen for this for bubbler hits, but I'm not so sure it was exactly what I wanted there. Either way, I think I prefer hitting it natively, which has surprised me somewhat, it's just so tasty and good.
I have a wooden MFLB stem, and that with the silicone MP is pretty decent, speeds up the pull with less effort. I would recommend getting one to try, you might find this is the best way.

One thing that is annoying which I will point out, is the sound it makes while dragging. Fast draws are a bit screechy - but nothing too bad, just being nitpicky.
I think an adjustable airflow collar which was quiet at rapid pulls would be better.

test

I also find I get the best flavor pinching buds and using it natively

test. I am ripped.
I think if you try to session this vape, you will get too high. It really is a one hit and good kinda deal here. I'm beginning to trip out haha

#TruthTalk, welcome to the GIM (grasshopper inspired misadventures)

 

[Vaperist]

Watch the video. You won't be able to remove the proprietary insulation in the mouthpiece and still have it function properly, the screen is a part of that piece. That piece also holds the inner cone in place. All you will be left with is a hollow mouthpiece that will heat up really fast and let all the herb be pulled into your mouth.

I'm pretty sure the heat from torching the mouthpiece will also warp the metal, possibly preventing it from screwing on again.

hot mouthpiece doesn't bother me as i will use it trough a bong mostly. and i'm sure i can figure how to put a screen in it. but are you sure that titanium can deform under a torch fire? this question is killing all my hopes for mouthpiece dabbing at the moment.

and it is not like i'm gonna experiment with my only Hopper when i receive it. i would do so if they start to sell extra mouthpieces. only then i would buy one and do those mean things to it.

 

[GreenHopper]

I like to use a Q-tip right after a session if its getting dirty. Its really easy to wipe out while still warm.

I'll carefully put the Q-tip in the oven slowly until it touches the screen slightly. Then I rotate the hopper as I press the Q-tip against the wall of the oven, and slowly draw the Q-tip back out.

EDIT: This will not help with residue stuck in the oven screen.

I've found these to be quite sufficient to remove all stubborn particulates in the chamber or mouth piece:

eGo Cleaning Brushes for e-cig Atomiser/Clearomiser/Tank 5 Pack

https://www.amazon.co.uk/dp/B00JZON8AQ/ref=cm_sw_r_other_awd_YJE4wb2WHCTMR

 

[ben7337]

Another week another warranty request! 4 bodies, 3 back ends, 2 front ends and still without a working unit. This one lasted about 2 weeks. Worked perfect one moment, dead the next. Clicked on and was met with flashing blue lights. Now no lights will turn on at all. Sigh, guess Ill have to pay to send it back AGAIN.

Wow, I knew some people had gone through a few units, but that's just ridiculous, they really shouldn't be charging you for what, 9 returns now? That's got to be like $45-90 just in return shipping at this point.

 

[studmuffin]

Hello,
Apparently, the sound of my voice can be heard under the bridge.
My bad.

 

[MoltenTiger]

why aren´t your expectations fullfielld with gh bubbler hits... what is lacking...
because that was also one of the ways I intended to use my gh... and why do you prefer hitting it natively... a lot of people seem to like to use the gh with bubblers and I have seen videos really milking up bubbler with the gh and big nice clouds..

I need to experiment more.
Basically from my experiences thus far, it is simply nicer to use it natively. I'm a big fan of bong hits too, but I've been vape bonging with a modded EQ for the last year or so, and for that device there's more benefit to water filtration. The GH is much better at heating material to a consistent temp and the vapour it offers is less smoky than my high temp EQ hits. The EQ will fluctuate by about 60C, where as the GH seems extremely accurate. It responds to small changes on the temp dial, you notice the difference in effect, flavour and the colour of AVB.
Because the temp for efficient extraction is much lower, the vapour is quite smooth and thinner, so unless you have a torch on the piece it's hard to know how the hit is going because it's hard to see.
I will play around a bit more, so far with the smaller D020 it milks it solidly (noticeable in the right lighting conditions), but with the larger piece it was very whispy. I suspect I was using different strains/quality between the two different chambers though (and I didn't have a torch on me with the larger piece).
I'm about to go to work for a while, than I shall be blasting clouds with the GH, if you have any specific questions about bubbler hits, let me know and I'll try and answer them.


I will add; it definitely works well, so the exhaled clouds aren't as crazy as the EQ vongs, but the effect is similar. Overall, it's just really enjoyable to use at 2.5-4 natively, it doesn't get too hot, flavour is better, and it is an enjoyable design to use.

 

[barnardbarnard]

And on the 7th day..... Grasshopper RIP

Started with the blinky lights whilst charging now no lights when charging and won't turn on unit is totally dead.

Have any others experienced this sort of issue is it a battery/charger issue or is it the unit itself?

I guess it is a warranty job in any event.

Great shame totally gutted!