Silver Surfer Vaporizer
- Thread starter vtac
- Start date
.laugingsodreamy12
Member
the thing that confuses me with both the SSV and the volcano is it doesnt really all around brown my avb. it does to most of it but it leaves i swear more trichomes/green than the davinci really sad to pay all that for units and it doesnt evenly brown it. if you glance at it it looks browbn but you look closer and it still has thc trichomes/green/yellow and this is just multiple blasts in both the SSV and the volcano.
JJ420
chillin on the couch, sippin off a 22 ounce.
The rules is: No flaming. Please do not post any messages that harass, insult, belittle, threaten or flame another member. Be nice to newbies. You've been warned about this before, this time you get a point.
^hey laughingdodreamy12, go back to combusting and/or seriously find a new hobby. Quit f***ing up this thread. The SSV is easy as sh!t to use, duhhr!
kingtut106
Well-Known Member
Just got an SSV cant wait to try it out and hook it up to my mobius. You think I could fit the tubing around a solo gong to attach it to my glass?
Tweak
T\/\/34|<
You might have to cut a little vertical slit in the tubing to get it started around it, it will be tight. How big is the Solo end compared to the glass on glass (18mm?) end?
Welcome to the wave,
Frederick McGuire
Aggressively Loungey
What size inlet do you have on the mobius?
AFAIK all the bubblers and stemless tubes have an 18mm inlet, and the tubes with a downstem and suspended perc have an 14mm inlet (18mm on the tube, with a low profile downstem).
If you've got a 14mm inlet (or an 18mm inlet and a 18-14 reducer), you can just stick the SSV tubing right in the joint, and it'll make a nice seal.
Re the solo stem, I can fit SSV tubing over the mouthpiece end of a solo stem, but it was a pretty tight fit.
With some effort, it should be possible to get the tubing around the bowl end, but you might need to soak the end of the hose in some hot water for a bit to make it more pliable.
The solo stem might introduce some unwanted drag though.
potatobass
Well-Known Member
Does anyone ever tried to ask to 7th floor a "Bubbler direct draw pipe wand " for the ssv? As it is pretty easy to use it handheld , i'd love to have a direct draw small device without using flexible tube... or just a small wand with a gong attachement.
Maybe you should look into an LSV...
potatobass
Well-Known Member
The thing is that i already have an SSV , and i love it. But i think it could become a little more versatile with this device.
kingtut106
Well-Known Member
The tubing fit perfectly inside my 18mm PVHES gong didnt have to cut it or anything
Well you could always get some adapters and such from like ALT or something. But thats risky as ive alwyas had the wands fall out of my GG SSV. Or you could always try and sell the SsV as the LSV was designed for what your looking for
Fresh_Baked
Member
I have a small B. Wilson bubbler and it's perfect. However, my Medicali straight tube works wonders with the SSV too. I've found that as long as the downstem is 14 mm so the hose can fit tightly, it'll work well, pretty much.
I'd say to either go with a straight tube or a bubbler, but it doesn't matter too much.
I'd say to either go with a straight tube or a bubbler, but it doesn't matter too much.
technique
Well-Known Member
So I recently cut up and put some old tights between my wand and my pipe and found the after a bowl the cloth is completely clogged(vapor brothers mini wand) and this does not give me confidence, so its about time I bought that water filtration I have been debating for ever.
I like taking large hits but I also don't want anything too cumbersome, clean pure harmless vapor is the most important thing though.
What do you guys recommend a small 100ml bong or a bubbler or something I haven't mentioned at all lol?
I like taking large hits but I also don't want anything too cumbersome, clean pure harmless vapor is the most important thing though.
What do you guys recommend a small 100ml bong or a bubbler or something I haven't mentioned at all lol?
technique
Well-Known Member
grokit
well-worn member
There's cheaper alternatives right on ssv's web page. Otherwise this is the cheapest I've found a bubbler:
It's only $10 but the tubing is the wrong size. If you want to try a plastic bubbler you could just make one out of a pepsi or a shampoo bottle or something that would probably work better.
In other words, you can comb the interwebs looking for a better deal, but you usually get what you pay for.
http://flashvape.com/fv-accessories...hment-system-w-free-bonus-mini-water-bubbler/
It's only $10 but the tubing is the wrong size. If you want to try a plastic bubbler you could just make one out of a pepsi or a shampoo bottle or something that would probably work better.
In other words, you can comb the interwebs looking for a better deal, but you usually get what you pay for.
http://flashvape.com/fv-accessories...hment-system-w-free-bonus-mini-water-bubbler/
Vitolo
Vaporist
I dare say I gave the FV maker the idea of using this unit when I originally got my FV and used this to make a video.
They are 49¢ and ship immediately (I received the 1/2 dozen I ordered in 5 days)
There is free shipping also!
http://www.miniinthebox.com/nanzihan-163-water-cigarette-pipe_p195592.html
They are 49¢ and ship immediately (I received the 1/2 dozen I ordered in 5 days)
There is free shipping also!
http://www.miniinthebox.com/nanzihan-163-water-cigarette-pipe_p195592.html
technique
Well-Known Member
That was how I ended up with the SSV after a friend and I experimented with a really bottom end box vape. I guess I will go for the percs as they are cheaper, not quite as in-line/manageable as the bubbler but at least i will be assured quality.
I went off the idea of the bong as I want to control the size of my hits.
Better start saving up specially if they still want some horrendous amount for international shipping lol, anyone actually using one of these babies?
http://silversurfervap.com/glass/wcfm/water-filter-cooler-moisturizer-91-straight-3-percolator.html
Thanks for all the help guys, love this site
EDIT: Ordered 2 of those vito bubblers for the time being,£0.75 for two with ree shipping is ridiculous