little maggie
Well-Known Member
I don't think so. They were listed as part of the preorder.
Anyway I just pmed them and asked for mine to wait until they get the ss pods. I have too many vapes as it is.
Discontinued Haze Square
- Thread starter scottg402
- Start date
Anyway I just pmed them and asked for mine to wait until they get the ss pods. I have too many vapes as it is.
ginolicious
Well-Known Member
I should have ordered this vape. Can’t afford it though. My haze V3 will have to satisfy my needs.
analytika
Well-Known Member
I got through this video without grasping the essential feature of the vape, rotation through four positions like a rubicks cube.
For one prone to rotate among strains, this vape really is a unique offering. Tempting.
But I'm not sold on the basic concept of reusing bowls just because it's a convection device. Gotta have full spectrum extraction! Can you microdose effectively, without bowl reuse? 4 microdoses of different strains or concentrates (!) on a single load is still tempting.
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
@Haze Vaporizers
Hello there:
I’m on the West Coast, specifically Portland, OR...
What PST time your “420 Square Pro deal” expires on 4/20/18???
Thanks in advance,
Stay vaped
Hello there:
I’m on the West Coast, specifically Portland, OR...
What PST time your “420 Square Pro deal” expires on 4/20/18???
Thanks in advance,
Stay vaped
Drexciya
Homage to the Deepsea Dwellers
It is satisfying needs right now
holyparsniper
I've vaped, and I can't get up!
Damn you 420. Finally bit the bullet on the Pro machine. Haven't seen a lot of concentrate talk or examples when comparing this to V3 but hope it scores well with rosin.
So scared what the final cost on this is going to be after shipping to Canadaland, and the customs import and duties and exchange rate!
Been watching this thread for too long.
Now it's off to the http://www.nationalcannabisconference.ca/ wish me luck!
Happy 420 Square Hazers!
So scared what the final cost on this is going to be after shipping to Canadaland, and the customs import and duties and exchange rate!
Been watching this thread for too long.
Now it's off to the http://www.nationalcannabisconference.ca/ wish me luck!
Happy 420 Square Hazers!
Last edited:
I like it much better than the V3 for trates!
John30
Member
Have you used keef in the square? I used to use it along with bud in my v3 but it wouldn't really be as effective as I hoped. Also it ended up filling up the unit with a ton more gunk to clean compared to just bud so I stopped trying to make it work and just saved keef for my enano
holyparsniper
I've vaped, and I can't get up!
Thanks @Other Side and @John30 looking forward to have one spot trates, one spot green, one spot trates and one spot green.
I like the possibilities to mix and match here!
I like the possibilities to mix and match here!
John30
Member
I was asking if he did try using keef in the square still awaiting my unit to arrive unfortunately :c
Didn't try that. I really don't collect kief. I like a single stage grind where it gets spread across all the sessions.
little maggie
Well-Known Member
I decided to wait for ss. I no longer need to wait for the mail and can just watch the rest of you talk about your experiences with the Haze. I'm a little concerned about the heat given that I can't use water or a whip with it.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I don't see why the whip wouldn't work, I will test it for you some time tomorrow. So water connection should be easy too, but this is mainly to be a portable anyhow... I want SS but presume mine is coming with Al for now so will probably end up with both I guess lol
Maggie it's surprisingly cool vapor considering the short airpath but slipping a silicone tubing over the mouthpiece will be no issue.
But yeah otherwise you have enough to keep you busy!
little maggie
Well-Known Member
I do. I'm trying to talk myself into getting rid of my triihouse vapes since I don't use them but I like looking at them. It will be interesting to see whether the square or nomad come first. (I hope you like your nomad)Maggie it's surprisingly cool vapor considering the short airpath but slipping a silicone tubing over the mouthpiece will be no issue.
But yeah otherwise you have enough to keep you busy!
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Definitely Square! For all of us lol For a while I was expecting them both around 420 but Dan of course has seen many (un)expected delays building the Nomad from scratch himself! I am actually so impressed how smooth the Haze launch has gone, and how accurate estimates have been. What a great company!
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
Hello there:
I’m getting a Square Pro 420 deal.
Excellent CS @Haze Vaporizers
Waiting to see fellow FC members happy faces from batch 1.
Congratulations Haze Vaporizers and FC members that got the Square.
Thanks.
Can’t wait for May...
Stay vaped.
I’m getting a Square Pro 420 deal.
Excellent CS @Haze Vaporizers
Waiting to see fellow FC members happy faces from batch 1.
Congratulations Haze Vaporizers and FC members that got the Square.
Thanks.
Can’t wait for May...
Stay vaped.
little maggie
Well-Known Member
I guess I'm getting aluminum and rejoining the wait for arrival. I looked at my Haze account which I probably should have avoided. There is no delivery date but it says it's been dropped off for mailing.
deadlytoaster
Canadian lost in Europe
Damn having a Square would've been awesome for 4/20. Would be way easier than trying to reload 4 bowls of an Arizer Solo in the wind.
StonerSloth
cui bono?
Got my Square in hand! I charged it up and immediately got all of the many parts cleaned and dried. The fit/finish is pretty good, but there are several small imperfections in the casting and finish.
I'm in the process of running a few test sessions.
A few questions:
My vibrate feature worked for the first one or two draws then stopped for the next two complete bowls then started working again. I assume I turned it on and off somehow. Does anyone know how to do this? I don't think it is explained in the manual?
My top tray/lid sits loosely/unevenly against the body and it seems like the airpath is not well sealed. I am drawing cool air around the lid/tray instead of through the bowl. The vape works better when I squeeze the top/tray against the body when I draw. Is there any way to adjust the tightness of the seal around the lid?
Thanks in advance.
I'm in the process of running a few test sessions.
A few questions:
My vibrate feature worked for the first one or two draws then stopped for the next two complete bowls then started working again. I assume I turned it on and off somehow. Does anyone know how to do this? I don't think it is explained in the manual?
My top tray/lid sits loosely/unevenly against the body and it seems like the airpath is not well sealed. I am drawing cool air around the lid/tray instead of through the bowl. The vape works better when I squeeze the top/tray against the body when I draw. Is there any way to adjust the tightness of the seal around the lid?
Thanks in advance.
John30
Member
Also got mine but still charging as of now I did notice a few nicks here and there on the body of the unit but nothing to noticable. I was surprised how much space there was between the two pieces that make up the vape but I haven't used it yet so we'll see how it goes!
subway13029
Well-Known Member
Hopefully these arent bad reports..of the unit not sealing?? Cant have an air leak..but i keep checking my spam but still no notice.
We spot check units before shipping and so far, we are satisfied with the finish. I am assuming that you guys are reporting the possible small bumps on the housing and they are due to casting process and not easily avoidable. There should not be anything major but if you do see anything, please contact me. We can always take back an unused unit and replace it with a hand picked one for you guys.
MinnBobber
Well-Known Member
..................................................................................
When re-assembling the top after loading the pods, you have to push the gasket in firmly, around all the edges and make sure it is seated firmly. Press, press, press all around the gasket
?? How far did you go in your initial cleaning?? Did you leave the inner-most gasket with stainless steel (SS) filter/lid intact??
If you went that far, your re-assembly of the 2 SS parts into the gasket and then reseating the gasket should be checked.
That 2 piece SS assembly is very fussy
StonerSloth
cui bono?
..................................................................................
When re-assembling the top after loading the pods, you have to push the gasket in firmly, around all the edges and make sure it is seated firmly. Press, press, press all around the gasket
?? How far did you go in your initial cleaning?? Did you leave the inner-most gasket with stainless steel (SS) filter/lid intact??
If you went that far, your re-assembly of the 2 SS parts into the gasket and then reseating the gasket should be checked.
That 2 piece SS assembly is very fussy
Yes, I tore it all down for a deep cleaning, stainless teardrop vapor-path-things included. I reassembled using the included assembly tool. I will take it apart again and re-seat everything very carefully. Thanks for the advice.
Edit: I re-seated everything really firmly and it seems to be working better. I can now hear the air intake on the side of the vape sucking in air - so that is encouraging.
Last edited: