Crafty/Crafty+ by Storz & Bickel

purplenurple24

Well-Known Member
Hey guys whats up i already own a mighty i was wondering would it be worth buying a crafty also whats your guys opinion. How well does the crafty work. How efficient is it. Do any of you guys connect it to a water tool if so how.
I don't have a Mighty, but the way I understand it , they are nearly identical in vapor production and efficiency. I love my Crafty, but It's only got 9 hours on it. Some (a lot) people seem to have issues once they get close to 100 hours. Some people have issues sooner. Puffitup has good deals and they have the latest firmware (2.10, I believe.) The Mighty is better in battery efficiency and it has a digital display on the unit which is nice. The only real upper hand the Crafty has is that it's pretty stealthy.
 
purplenurple24,
  • Like
Reactions: Thcgos

UncleJunior

Well-Known Member
Heyo mine just arrived. Only other portable vapes I've used are my MFLB and various oil pens my friends own.

First impressions; it's much easier to use than the MFLB, but getting a good hit is still very contingent on a regulated draw speed.

Starting at 356 degrees, the first hit on the Crafty is delicious and produces a large cloud.


Now the bad. Second hit produces an even bigger cloud, but starts getting that overcooked MFLB flavor. Third hit starts tasting bad. Can get about 5 more hits, but the flavor gets worse every time.

The Crafty also likes vaping your bud the second you put it in the bowl.. literally the second the bud hits the bowl.. before i'm even done loading it I can smell my delish kush vaping.. and see vapor streaming up. Every time i load it it's like a race against time and I'm scrambling to load it fast, screw the top on and hit it before too much of that delicious first hit gets vaped into the air...


But my main question is why the hell don't they use the fine screens they do on the bottom of the bowl on the top chamber?!

UdZeSrx.jpg


that's after 3 bowls.. ridiculous. this thing is going to get filthy quick. and this isn't even a fine grind..



t4bTrB2.jpg


So I replaced it with one of the extra bottom screens.. like the original design should feature.

And of course.. the battery life you all know is terrible..

This thing retails for $350+.. Storz and Bickel could't include a sweet little charging dock?

Anyway, first impression... not impressed.
 
UncleJunior,

dirtdragon

Well-Known Member
Heyo mine just arrived. Only other portable vapes I've used are my MFLB and various oil pens my friends own.

First impressions; it's much easier to use than the MFLB, but getting a good hit is still very contingent on a regulated draw speed.

Starting at 356 degrees, the first hit on the Crafty is delicious and produces a large cloud.


Now the bad. Second hit produces an even bigger cloud, but starts getting that overcooked MFLB flavor. Third hit starts tasting bad. Can get about 5 more hits, but the flavor gets worse every time.

The Crafty also likes vaping your bud the second you put it in the bowl.. literally the second the bud hits the bowl.. before i'm even done loading it I can smell my delish kush vaping.. and see vapor streaming up. Every time i load it it's like a race against time and I'm scrambling to load it fast, screw the top on and hit it before too much of that delicious first hit gets vaped into the air...


But my main question is why the hell don't they use the fine screens they do on the bottom of the bowl on the top chamber?!

UdZeSrx.jpg


that's after 3 bowls.. ridiculous. this thing is going to get filthy quick. and this isn't even a fine grind..



t4bTrB2.jpg


So I replaced it with one of the extra bottom screens.. like the original design should feature.

And of course.. the battery life you all know is terrible..

This thing retails for $350+.. Storz and Bickel could't include a sweet little charging dock?

Anyway, first impression... not impressed.

Take the fine screen and put it on top of the load and remove screen from CU. Yes, it may scratch the metal but better clouds for sure and you don't have to clean the screen like the one in the CU.
 
Last edited by a moderator:
dirtdragon,

Thcgos

Vape Addict
Heyo mine just arrived. Only other portable vapes I've used are my MFLB and various oil pens my friends own.

First impressions; it's much easier to use than the MFLB, but getting a good hit is still very contingent on a regulated draw speed.

Starting at 356 degrees, the first hit on the Crafty is delicious and produces a large cloud.


Now the bad. Second hit produces an even bigger cloud, but starts getting that overcooked MFLB flavor. Third hit starts tasting bad. Can get about 5 more hits, but the flavor gets worse every time.

The Crafty also likes vaping your bud the second you put it in the bowl.. literally the second the bud hits the bowl.. before i'm even done loading it I can smell my delish kush vaping.. and see vapor streaming up. Every time i load it it's like a race against time and I'm scrambling to load it fast, screw the top on and hit it before too much of that delicious first hit gets vaped into the air...


But my main question is why the hell don't they use the fine screens they do on the bottom of the bowl on the top chamber?!

UdZeSrx.jpg


that's after 3 bowls.. ridiculous. this thing is going to get filthy quick. and this isn't even a fine grind..



t4bTrB2.jpg


So I replaced it with one of the extra bottom screens.. like the original design should feature.

And of course.. the battery life you all know is terrible..

This thing retails for $350+.. Storz and Bickel could't include a sweet little charging dock?

Anyway, first impression... not impressed.

Totally agree regarding the fine screen. The first Mod most crafty users do is swap out the cooling unit screen for a fine screen. Don't know what S&B were thinking.

Regarding the race against time, when loading the bowl; Why not turn it on after loading the bowl?
That's usually what I do... no biggie IMHO. Talking about 15 seconds difference max.

Regarding the overcooked taste,
I'm a bit baffled TBH.
The main reason I love my crafty so much is because it holds the flavour so much better than my Solo/Air, Grasshopper, Flowermate, Indica, Titan2 or my friends Pax1 & Ascent.
I don't have an MFLB to compare.. but the overcook taste is much better than all the above I mentioned and doesn't come in until much later in a session.

I would suggest cleaning out the cooling unit regularly, as a dirty unit will contribute to a bad flavour.
From the photos yours looks clean (except the particulates from the coarse screen). Maybe clean it out and start with a fine screen straight after the clean.
 
Thcgos,
  • Like
Reactions: Cardiox

vapviking

Old & In the Way
Heyo mine just arrived. Only other portable vapes I've used are my MFLB and various oil pens my friends own.

First impressions; it's much easier to use than the MFLB, but getting a good hit is still very contingent on a regulated draw speed.

Starting at 356 degrees, the first hit on the Crafty is delicious and produces a large cloud.


Now the bad. Second hit produces an even bigger cloud, but starts getting that overcooked MFLB flavor. Third hit starts tasting bad. Can get about 5 more hits, but the flavor gets worse every time.

The Crafty also likes vaping your bud the second you put it in the bowl.. literally the second the bud hits the bowl.. before i'm even done loading it I can smell my delish kush vaping.. and see vapor streaming up. Every time i load it it's like a race against time and I'm scrambling to load it fast, screw the top on and hit it before too much of that delicious first hit gets vaped into the air...


But my main question is why the hell don't they use the fine screens they do on the bottom of the bowl on the top chamber?!

UdZeSrx.jpg


that's after 3 bowls.. ridiculous. this thing is going to get filthy quick. and this isn't even a fine grind..



t4bTrB2.jpg


So I replaced it with one of the extra bottom screens.. like the original design should feature.

And of course.. the battery life you all know is terrible..

This thing retails for $350+.. Storz and Bickel could't include a sweet little charging dock?

Anyway, first impression... not impressed.
Yes, fine screen keeps more particles out of c/u.
It appears, from you photo, that your grind may be a little finer than necessary.
Since you've just received your Crafty, I'm gonna suggest that you try variations of grind/fill/dryness of herb/etc. It is true that the learning curve with Crafty is not steep, but still there are better ways and less-good ways to use it. Each time I have a new batch to put in (Mighty), I try to ascertain the optimal method of use for it (for me) and take a few of bowls to dial it in.
Filling should not be stressful or cause loss of terpenes, etc. Let it be a little cooler when you fill up.
 
vapviking,

Hawk

Well-Known Member
Heyo mine just arrived. Only other portable vapes I've used are my MFLB and various oil pens my friends own.

First impressions; it's much easier to use than the MFLB, but getting a good hit is still very contingent on a regulated draw speed.

Starting at 356 degrees, the first hit on the Crafty is delicious and produces a large cloud.


Now the bad. Second hit produces an even bigger cloud, but starts getting that overcooked MFLB flavor. Third hit starts tasting bad. Can get about 5 more hits, but the flavor gets worse every time.

The Crafty also likes vaping your bud the second you put it in the bowl.. literally the second the bud hits the bowl.. before i'm even done loading it I can smell my delish kush vaping.. and see vapor streaming up. Every time i load it it's like a race against time and I'm scrambling to load it fast, screw the top on and hit it before too much of that delicious first hit gets vaped into the air...


But my main question is why the hell don't they use the fine screens they do on the bottom of the bowl on the top chamber?!

UdZeSrx.jpg


that's after 3 bowls.. ridiculous. this thing is going to get filthy quick. and this isn't even a fine grind..



t4bTrB2.jpg


So I replaced it with one of the extra bottom screens.. like the original design should feature.

And of course.. the battery life you all know is terrible..

This thing retails for $350+.. Storz and Bickel could't include a sweet little charging dock?

Anyway, first impression... not impressed.


It makes no sense to load the Crafty after you turned it on. Load first then turn on.
 

matthend

Well-Known Member
I just picked up a crafty to test drive from a buddy to see if I like it. He was never using it, hadnt ever installed the app, etc. First off, this thing rips! My last experience vaping flower was the ole mflb, and this is on another level! The user friendliness and simplicity cant be beat imo, just turn it on and hit it once it vibrates. Further experimentation to follow...:science:
 
matthend,
  • Like
Reactions: Thcgos

UncleJunior

Well-Known Member
It makes no sense to load the Crafty after you turned it on. Load first then turn on.

oh yea? have you heard of a second bowl? so it makes sense to turn the crafty off, and wait for it to cool down, reload the bowl, and then wait for it to reheat? that makes sense to you? k
 
UncleJunior,

Mr Mellish

Well-Known Member
oh yea? have you heard of a second bowl? so it makes sense to turn the crafty off, and wait for it to cool down, reload the bowl, and then wait for it to reheat? that makes sense to you? k

That approach has worked for me and I have a Crafty that has been in operation since Nov/Dec 2014. I also never charge it while the battery is warm.

You can also pop the CU, dump the load and let it sit for a minute or two with the CU off to cool.

"So, we have all these possibilities before we stampede toward the clitoris, Watson!"
- Monty Python's Meaning of Life
 
Last edited:

vapviking

Old & In the Way
oh yea? have you heard of a second bowl? so it makes sense to turn the crafty off, and wait for it to cool down, reload the bowl, and then wait for it to reheat? that makes sense to you? k
So many questions!
Glad you didn't ask me directly, 'cause Idk how to answer the first one.

I think it does make sense to let Crafty cool down at least a bit before reloading.
You are the one who complained about materials being vaped before you even get the cover back on!
Then there's the burnt fingers...
And the possibility of melting the filling aid (which I use most of the time)...
 
vapviking,

Hotz

Well-Known Member
Hey guys, I'm thinking of sending my crafty to warranty not know if I ask a couple upgrade to or might continue with crafty ... how are the latest versions? The problems of overheating and death lights continue?
 
Hotz,

UniqueCrafty

☆☆☆☆
Hey crafty users!

i own my crafty since Nov.2015 v2.08 30h.. Works perfect without any problems *knock on wood*
I think now i have done enough experience for my personal favourite usw of crafty fill/dryness/grind/vape and loads.... Just want to tell....

I prefer to use my crafty with a domed screen @biohacker ;) fill my chamber up to 80% with DRY herbs, a grind between fine and rough for nice flavour and vapour! With a full battery load i get 3 bowls/~15min 185 degree or 4 bowls load up 50% ~10min same temperature. If u like you can boost up the temperature for your the last 2-3 hits.....

It would be nice if you guys will also post your personal favourite experience of using your cratfy :) Maybe also with bubblers... will be my next experience :science:
 
UniqueCrafty,

vapviking

Old & In the Way
Hey guys, I'm thinking of sending my crafty to warranty not know if I ask a couple upgrade to or might continue with crafty ... how are the latest versions? The problems of overheating and death lights continue?
I think it has as much to do with your own experience and how the Crafty has held up to your use pattern. Some folks drive it hard and hot and I think those are the ones who are better off with a Mighty (me...I knew after Crafty #3)! If it's doing a good job for you, well...can't argue too much with that!
Of course, some Crafty's will just fail and need service, I don't think you can see that as too negative, there's the warranty to keep the ride going.
Improvements do seem to be ongoing with both Crafty and Mighty Not knowing your exact version it's hard to say what might be different about a current model.
 
vapviking,

grokit

well-worn member
It makes no sense to load the Crafty after you turned it on. Load first then turn on.
Exactly. The folks that have used their crafty's reliably for long periods of time know this. Loading and vaping another bowl before cool-down is a recipe for trips back to storz & bickel for repair.
 
grokit,

Cardiox

Active Member
2 month update:
I have put in about 31 hours of use on this thing and have already bought replacement parts. I actually found it necessary to buy a wear and tear kit after 1.5 months of use! That is not a bad thing, though. I am genuinely satisfied with this product and EVERY session is something I really look forward to. I can't over-consume with this thing, two bowls and I am good for hours. If I halt consumption for a day, a single bowl will do it for the entire day for me ( not effect wise, just my personal satisfaction) . Maybe another one give or take. Fact is, It was worth the money for sure. The cons of this unit are definitely more noticeable over time to be frank. Mainly, just the fact that if you were to have two bowls by yourself and forget to charge it, you only have a single good session left in the battery. This has not been an issue for me, but it would be for a majority of people. I am over the honeymoon phase and STILL love this thing nearly as much as when I bought it.

Heyo mine just arrived. Only other portable vapes I've used are my MFLB and various oil pens my friends own.

First impressions; it's much easier to use than the MFLB, but getting a good hit is still very contingent on a regulated draw speed.

Starting at 356 degrees, the first hit on the Crafty is delicious and produces a large cloud.


Now the bad. Second hit produces an even bigger cloud, but starts getting that overcooked MFLB flavor. Third hit starts tasting bad. Can get about 5 more hits, but the flavor gets worse every time.

The Crafty also likes vaping your bud the second you put it in the bowl.. literally the second the bud hits the bowl.. before i'm even done loading it I can smell my delish kush vaping.. and see vapor streaming up. Every time i load it it's like a race against time and I'm scrambling to load it fast, screw the top on and hit it before too much of that delicious first hit gets vaped into the air...


But my main question is why the hell don't they use the fine screens they do on the bottom of the bowl on the top chamber?!

UdZeSrx.jpg


that's after 3 bowls.. ridiculous. this thing is going to get filthy quick. and this isn't even a fine grind..



t4bTrB2.jpg


So I replaced it with one of the extra bottom screens.. like the original design should feature.

And of course.. the battery life you all know is terrible..

This thing retails for $350+.. Storz and Bickel could't include a sweet little charging dock?

Anyway, first impression... not impressed.
As for the burnt taste, I only noticed that when I was using lower quality cannabis at a higher temperature.
 

matthend

Well-Known Member
after a couple of days i have to say i like the crafty a lot, but have a few questions. I have yet to use the boost mode, my abv seems to be completely (and evenly!) spent after a session at 352. Is there something left that could be pulled out a a 25-30 degree hgher temp? Wouldnt this taste completely of burnt popcorn, even if there was anything left to give? It just seems that the boost mode would be a waste of what i am finding out is precious battery life that would be better spent on heating a fresh bowl than overheating a vaped one.

On the subject of multiple bowls, I get the feeling that if I am going to use this heavily I will be slowly killing it and would be better served with the mighty. Is this correct, or am I just being overly cautious after reading of so many battery woes?
 
matthend,

Mr. Me2

Well-Known Member
after a couple of days i have to say i like the crafty a lot, but have a few questions. I have yet to use the boost mode, my abv seems to be completely (and evenly!) spent after a session at 352. Is there something left that could be pulled out a a 25-30 degree hgher temp? Wouldnt this taste completely of burnt popcorn, even if there was anything left to give? It just seems that the boost mode would be a waste of what i am finding out is precious battery life that would be better spent on heating a fresh bowl than overheating a vaped one.

On the subject of multiple bowls, I get the feeling that if I am going to use this heavily I will be slowly killing it and would be better served with the mighty. Is this correct, or am I just being overly cautious after reading of so many battery woes?
I use the Crafty on its default temperatures and find the boost does extract more. It doesn't taste as great as at the beginning of a session, but I wouldn't go so far to call it that burnt popcorn taste.

I think most people here would agree that if you expect to use one of these heavily, you're probably better off with the Mighty.
 

Trypsy Summers

Well-Known Member
2 month update:
I have put in about 31 hours of use on this thing and have already bought replacement parts. I actually found it necessary to buy a wear and tear kit after 1.5 months of use! That is not a bad thing, though. I am genuinely satisfied with this product and EVERY session is something I really look forward to. I can't over-consume with this thing, two bowls and I am good for hours. If I halt consumption for a day, a single bowl will do it for the entire day for me ( not effect wise, just my personal satisfaction) . Maybe another one give or take. Fact is, It was worth the money for sure. The cons of this unit are definitely more noticeable over time to be frank. Mainly, just the fact that if you were to have two bowls by yourself and forget to charge it, you only have a single good session left in the battery. This has not been an issue for me, but it would be for a majority of people. I am over the honeymoon phase and STILL love this thing nearly as much as when I bought it.

As for the burnt taste, I only noticed that when I was using lower quality cannabis at a higher temperature.
I've had mine a while now,and I have not had to buy replacement parts as yet, But I have to say I've kinda gone off the Crafty, don't get me wrong I use it regularly as my other half has claimed the Mighty, (I rate the Mighty,) But I only use it at home, like if I'm awaiting for the Arizer EQ to heat up.
I think the Crafty battery life is shocking, and also the vape quality does seem to peter out too quickly for my liking. I hate the two temp set up, as I don't have a smartphone, but I've managed to borrow one to change the settings to 195C and 205C respectively! The Crafty is the champion for a sneaky bowl on the go, I'll give it that!! And as I've posted elsewhere, the ABV can be reused in the Volcano!!!

Peace:leaf:
 
Trypsy Summers,
  • Like
Reactions: Cardiox

Reggie Watts

Well-Known Member
Is there something left that could be pulled out a a 25-30 degree hgher temp?

Yes. 352 is on the low side. If you want to get the most out of your herbs, try bumping it to 372, which is my favorite temp to use on the Crafty/Mighty.

With the Mighty, you can boost every time and still get 5 bowls before needing to recharge.
 

Skatedecking

Mflb and PA 2.0 Arizer Air S & B Crafty
The 2016 software update seems to have fixed the flashing light, app connectivity and vibration mishaps, no?
 
Skatedecking,

Ricci

New Member
I have just recieved mine a week ago even i read lots of bad stuff regarding this vapor, one of the new serial nº (letter and numbers), i really hope it wont let me down, as i love it !!!

It worries me quite a bit as as far it goes im on 2h/day use on that little champ !!!

Got an mflb and volcano as backup !!!
 
Ricci,

grokit

well-worn member
Well my beloved crafty has let me down, and so has s&b's warranty coverage. I've had it for just over a year, and the usb port failed. I did not use my crafty that often, in fact it still had less than 20 hours on it when it was sent in. It just wouldn't connect to the supplied charging cable anymore. At first it needed some wiggling, then the connection failed completely. I tried a couple of other usb cables to no avail, then got my rma# from s&b and sent it in. They refused to repair it, and sent me a bill for $129.

They called it abuse (I babied my crafty!), while I consider it a defective port. So I asked them to send it back unrepaired. I would have paid for a mighty upgrade, but not for repairing a warrantied crafty.

I decided to put the $129 toward a boundless cfx from puffitup. I am expecting to get my perfectly functioning crafty that won't take a charge back soon if anyone's interested. I suppose it could be hardwired to an external battery pack or something. Just a preview not a solicitation. I have extra parts too.
 
grokit,
  • Like
Reactions: Eatrocks

chillersnov8p

Well-Known Member
Well my beloved crafty has let me down, and so has s&b's warranty coverage. I've had it for just over a year, and the usb port failed. I did not use my crafty that often, in fact it still had less than 20 hours on it when it was sent in. It just wouldn't connect to the supplied charging cable anymore. At first it needed some wiggling, then the connection failed completely. I tried a couple of other usb cables to no avail, then got my rma# from s&b and sent it in. They refused to repair it, and sent me a bill for $129.

They called it abuse (I babied my crafty!), while I consider it a defective port. So I asked them to send it back unrepaired. I would have paid for a mighty upgrade, but not for repairing a warrantied crafty.

I decided to put the $129 toward a boundless cfx from puffitup. I am expecting to get my perfectly functioning crafty that won't take a charge back soon if anyone's interested. I suppose it could be hardwired to an external battery pack or something. Just a preview not a solicitation. I have extra parts too.
Wow that really sucks! I'm right at 20 now after having it for a year and I'm trying to do everything I can to keep her pristine but hearing about this type of customer service is disheartening. Did you keep the stir stick on it?
 
Last edited:
chillersnov8p,
  • Like
Reactions: Thcgos

grokit

well-worn member
Yeah I've got a couple of stir sticks, a couple of cooling units, extra o-rings & screens.

7oKAq6M.png

edit: looks like I'm not the only one that thinks they're fucked up :disgust:

edit2: Fair warning for any prospective purchasers in the USA; you may have better luck than I with S&B's warranty coverage if you can avoid using your battery, or usb port, because they aren't covered and are reportedly prone to failure (from numerous reviews).

Crafty and Mighty owners in the USA don’t get the same protections as they do in Europe and Australia, because Storz & Bickel can get away with substandard service by law. Their warranty coverage: “does not include defects due to normal wear and tear”. That’s verbatim. Batteries, which are covered for two years overseas, aren’t covered at all. And if your USB port stops connecting they will charge you for a whole new exchange. It seems the only way S&B portables are covered in the USA is if they aren’t used :peace:
 
Last edited:
Top Bottom