That was temp 4. This setup works great on a j hook because you just flip it over to debowl. On a water piece, you gotta wait a couple minutes for the reducer to cool down before debowling. TRWW scoop and tamp is a perfect tool for this setup.
CouchLog
- Thread starter Chris@420Eng
- Start date
DgN'R
I'm No Superman!
My wooden mouthpiece only fits a few millimeter in my 14mm glass, will the glass mouthpiece be different? Will it fit perfectly? or should I buy another glass part?
You can just take the metal part out of the mp and plop it right in the 14 mm glass. I would try that before buying anything else as it works pretty well in my experience
The glass-lined mouthpiece has a typical glass joint so it should be fine. Although my wood stems go in farther than you describe. Maybe they have changed recently?
Rather than buy a glass lined MP, I would recommend buying the bowl. It's the best way to use the CL on glass in my opinion.
And as Pcloudy points out, the metal herb chamber can be put in a 14mm joint. It also works great in some of my 18mm bowls with an o-ring. Ed's TNT old injector bowl and I think the SB bowl work with that trick.
And of course there are other makes of 14mm bowls now:
14mm injector bowls?
I have a CouchLog, the heater fits 14mm female joints natively. I’m interested in trying it “injector style” with a glass bowl, similar to the DCE, FP, etc. Does anyone know of a 14mm female to 14mm male adapter that accepts a standard size screen in the middle? I’d prefer non-DH Gate if...
fuckcombustion.com
Zillacon
🤠🤠🤠🤠
I'm doing my part 🫡
EarthworldTim
Well-Known Member
I got one of the glass lined stems and I haven't used it since I first got the log. The glass bowl is all I use now for ease and flavor. I don't dislike the stems per se but I wasn't motivated enough to use them a ton and really get a handle on packing the metal chamber, which I feel is the main reason I don't use them often.
I did add glass beads to the standard wood stem and also discovered they dirtied very quickly so I abandoned that method. The standard stem is fun to use sometimes for small dosage and temp rips though.
At the end of the day it's almost always the glass bowl on a water piece or j hook. The log has almost completely taken over for home use and in the last few months I've only taken another desktop vape out once.
I did add glass beads to the standard wood stem and also discovered they dirtied very quickly so I abandoned that method. The standard stem is fun to use sometimes for small dosage and temp rips though.
At the end of the day it's almost always the glass bowl on a water piece or j hook. The log has almost completely taken over for home use and in the last few months I've only taken another desktop vape out once.
coolbreeze
Well-Known Member
Totally agree. The glass mouthpiece is nice for quick low-temp loads but the bowl adds distance which in this case evens out the roast some, has a wider load/temp range, and keeps the flavor nicer. Also work great as a ZX party bowl.
Same. The stems are great but the bowl is the best.
Mine could easily take over--it's almost always on and warm. All the convenience of a log and the power of a ball injector.
DgN'R
I'm No Superman!
yes, it's work, but I don't like this configuration, because:
- this forces me to remove the heat protection sleeves because otherwise it doesn't work with my glass (it's flat and too far away otherwise, the contact does not work as it should)
- no stirring possible, otherwise the screen and all the contents of the chamber could empty into the glass (I think this problem will be solved in the next revision?)
ok thanks i think i'll get one to try.
No idea, it doesn't work properly here, I don't use this configuration with my glass because the MP doesn't hold properly once inserted.
Actually, my configuration is a wooden mouthpiece (without pad, ball or glass) with the PWM set to 3, and I love it! so easy!
Same.
Perfect in that case I'll take both
Canna Chameleon
Muted by mods. Run off by rudeness.
1. I actually bought a second metal bowl just so I don’t have to remove it from the stem, BUT either way I slip it directly into a 19/14 glass reducer and it fits perfectly and gives me the distance I need without removing the sleeve.
2. I ditched the flat screen early on and make my own basket screens that friction fit the sides of the metal bowl.
Is it SSC? I think he's pretty loaded up with work now. I have an order out from him for some bowls and dry catch that I'm patiently waiting on.
It is. Those 14mm bowls he made for the zx look like they would be perfect for the couch log. I have to crank mine up to like 8 to get good results with the vg oneIs it SSC? I think he's pretty loaded up with work now. I have an order out from him for some bowls and dry catch that I'm patiently waiting on.
Wow that's so high. I mean I know they are all tuned differently. But I have heard that the VG bowl doesn't have a great seal. I don't have one though.
I only tried it a couple times because I dont like to play with my settings to much on it but Ill have to take it back out. Its definitely not the best seal though.
letter never sent
reckoner
I have to turn my unit up to 8+ with the official glass bowl. It’s pretty tough for me to get a darker roast. I’d definitely like to get a 14mm glass bowl that allows the injector to get closer to the herb. The PHASE3 one looked like it could work well.
magtoons
Well-Known Member
yes, it's work, but I don't like this configuration, because:
- this forces me to remove the heat protection sleeves because otherwise it doesn't work with my glass (it's flat and too far away otherwise, the contact does not work as it should)
- no stirring possible, otherwise the screen and all the contents of the chamber could empty into the glass (I think this problem will be solved in the next revision?)
ok thanks i think i'll get one to try.
No idea, it doesn't work properly here, I don't use this configuration with my glass because the MP doesn't hold properly once inserted.
Actually, my configuration is a wooden mouthpiece (without pad, ball or glass) with the PWM set to 3, and I love it! so easy!
Same.
Perfect in that case I'll take both
1. I actually bought a second metal bowl just so I don’t have to remove it from the stem, BUT either way I slip it directly into a 19/14 glass reducer and it fits perfectly and gives me the distance I need without removing the sleeve.
2. I ditched the flat screen early on and make my own basket screens that friction fit the sides of the metal bowl.
TRWW TinyMight basket screens work great as an option and drop right in.
Replacement Screens
Well made stainless steel screens for many devices The TM screens are cut to fit a variety of stems including the stock stems as well as the ones made by The Rogue Wax Works and other artisans Price is per screen
So reading through here, I feel I would end up preferring the glass injection bowl also. Using CL as an injection vape.
This revelation makes me ask the question "why choose couch log over other 14mm injection vapes?"
I feel I would prefer handling CL more compared to conventional ball vape designs, but since I don't have one it's all theoretical. I'm curious if any of you have other things worth mentioning after prolonged use?
This revelation makes me ask the question "why choose couch log over other 14mm injection vapes?"
I feel I would prefer handling CL more compared to conventional ball vape designs, but since I don't have one it's all theoretical. I'm curious if any of you have other things worth mentioning after prolonged use?
Zillacon
🤠🤠🤠🤠
@RedZep the CL is a mainstay on my desk.
I have a couple vapes, and this one just kicks ass at what it does with a form factor that follows.
You want to hit a microdose, sure thing. Wanna rail a huge bowl, CLs got you. The craftsmanship is very beautiful, with tight tolerances. I had to replace the female port and I know of one other instance of this happening, so in terms of reliability I would say it's solid as a rock.
It's just a darn tootin good vape
I have a couple vapes, and this one just kicks ass at what it does with a form factor that follows.
You want to hit a microdose, sure thing. Wanna rail a huge bowl, CLs got you. The craftsmanship is very beautiful, with tight tolerances. I had to replace the female port and I know of one other instance of this happening, so in terms of reliability I would say it's solid as a rock.
It's just a darn tootin good vape
Last edited:
coolbreeze
Well-Known Member
I mostly go injector style with the bowl, but direct with the mouthpiece for quick convection hits is also excellent and something much clumsier to do with a ballvape. I tend to use a fairly narrow temp band but some folks use most of the dial so I think that speaks to its range, as well. Safer around cats and kids, more anonymous looking, AND you can even use it as a wall vape!
DgN'R
I'm No Superman!
I think this is the case for every vaporizer, some people simply prefer the use of a coil and water filter. I mainly use the MP set to 3 with PWM and still manage to get 4-5 puffs (and a good cloud). I use the loading funnel for occasional stirring without getting it all over the place, a stamp and off you go again. Energy consumption is also lower, set to 3 on a power meter, it shows me a consumption of 6W. In comparison, a 20mm coil generally provides 100W of power so it's perfect for leaving it plugged in all day. Better safety too, as our friend coolbreeze points out above. I also love the ritual with the MP, it's perfect for working in front of a computer without having to worry about a water filter. It's therefore versatile, making it an excellent and powerful vaporizer.
Possible solution?
An adapter, a cup screen and some steady hands. Temp dial set to a smidge below 4.5.
condition
Well-Known Member
Great video, as always. What cup screen, like Tinymight's or the cup screen of the Couchlog metal chamber?Possible solution?
An adapter, a cup screen and some steady hands. Temp dial set to a smidge below 4.5.
I use the provided screen for the injector, temp 6 to 7 and get very dark roast through bubbler. But the herb is farther from the heater than your method.
Thanks. The cup screen I’m using is the same for my TM, but I had to flatten it a little. You can do the same with the injector bowl if you like. I just like to have the herb close to the heater, so I can keep the temp at 4.5.
rvarick
Well-Known Member
I recently cobbled together something similar. My solution was a 19/14 adapter (from Grav). For the screens, I used a couple standard basket screens. For one, I trimmed the rim off and then stuck the rimless basket down into the joint. For other basket screen, I put it in the bottom (as they're normally used), to hold the internal screen in place. I also tried to flatten both a bit so they'd sit more even with each other. Examples shown below:Possible solution?
An adapter, a cup screen and some steady hands. Temp dial set to a smidge below 4.5.
