• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

'The Misty Log' - DIY wooden Log Vaporizer

GI

Well-Known Member
Probably this buck converter is better thsn dimmer, ok, for the tube, i can try to send an email in english... but i try before one tube that i reduce from 12 to 11 OD and is about 0.5 thin and see what happens before order.
 

blokenoname

DIY Log Dabbler 😁πŸͺ΅πŸ’ͺπŸ’¨πŸ’¨πŸ’¨
Dimmer or buck converter/vvps will both do. The buck is more precise, due to the digital display. Easier to memorize the wattage/voltage than a random position on an unmarked dimmer dial.

I'd suggest looking for one with push buttons for changing the voltage. Most come with miniature style potentiometer screws though. Works fine too, but you'll always need a small screwdriver then, when changing the voltage.

 

brainiac

log wrangler
First post on NFC. Highly encouraging to see so much interest in DIY log and desktop vapes :clap:

Been busy with other (mainly useful) stuff recently so I'm really happy to be back building logs again.
This one's an oak Rustic. It's part of a branch cut by a local farmer during routine land management.
Here's the blank prior to de-barking.

Raw-oak-blank.jpg


De-barked, threaded and drilled...

oak-rustic-empty.jpg


HC and electrics installed. Base well closed and sealed with olive green leather.

Oak-R-in-hand-1s.jpg

Oak-R-base-s.jpg

Oak-R-top-2s.jpg







































Oak-R-w-stem-3s.jpg


The stem is also oak but made from dowelling so it doesn't count as Rustic.
Well, back to the testing :science:- no rest for some of us :D
 

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
Hey @blokenoname I have this gadet and mean to post about it here and always forget..
Actually i managed to power one small halo-coconut with it that features 20w bulb with a usb to 2.1mm cable.
Xtar PB2S QC 3.0 + PD 3.0 Portable Li-ion Charger and Powerbank (LIMITED Red LED Edition) (Red)
It can be used also as a powerbank and a charger.
Input: QC3.0 and PD3.0 (5v 2A / 9V 2A / 12V 1.5A)
Constant Current Charging 2A x 2 / 2A x 1 / 1A x 2
Charge Voltage: 4.20V +- 0.05V
Termination Current: <= 120mA
USB Output: QC3.0 and PD3.0 (5v 2A / 9V 2A / 12V 1.5A)
Operating Temperature: 0-40C
Compatible batteries: 18650 (protected and unprotected), 20700/21700 (unprotected)
 

GI

Well-Known Member
Hi,
I don't understand one thing, the dome screen to prevent alogen light go in the eyes it' togheter with the debris screen or down, here a drawing...
 

Attachments

  • IMG_20200617_092648.jpg
    IMG_20200617_092648.jpg
    749.4 KB · Views: 32
jagi,

GI

Well-Known Member
das ist richtig auf der rechten Seite. Bildschirm, Dynavpe Bildschirm, Bildschirm ..
Min : 6:50 Video

so you use dynavap screen between two mesh, but in my first build i use a piece of steel, the same of the tubing, if i put it like you became more conduction than convection or not ? if i put the dome just over the bulb and more over the screen isn't better ? i just need to know because it's more easy to put at the same level of the screen but....

Because dynavap screen are no so economic...
 
jagi,

GI

Well-Known Member
This is mine, the tube is 12 OD...need 20 minute to warm before use it....i would like to made one with thinner tube, lamp is 10w, is so simple :-) thanks to this thread, here and in the old forum :)
 

Attachments

  • IMG_20200616_173423.jpg
    IMG_20200616_173423.jpg
    380.6 KB · Views: 40
  • IMG_20200616_173359.jpg
    IMG_20200616_173359.jpg
    657 KB · Views: 43
  • IMG_20200616_173305.jpg
    IMG_20200616_173305.jpg
    597.2 KB · Views: 43

blokenoname

DIY Log Dabbler 😁πŸͺ΅πŸ’ͺπŸ’¨πŸ’¨πŸ’¨
@all

As the original FC and NewFC get merged tomorrow, I wanted to ask if you feel any need to preserve and migrate our new Misty thread's contents here or if we should forgo that and just move back to the old thread on FC, as we left it. Saves @Stu & Co. some work.
 
blokenoname,

brainiac

log wrangler
Useful looking tools.
I'm certainly in the market for a better tube cutter. Any more details on that?
 
brainiac,
  • Like
Reactions: Cheebsy

blokenoname

DIY Log Dabbler 😁πŸͺ΅πŸ’ͺπŸ’¨πŸ’¨πŸ’¨
Great to see that Rustic blank getting the full Misty treatment :tup:
And that cartridge heater should ensure that it'll mamage easily with concentrates as well as herb.

Coming along nicely:nod:
Left it unchanged, mostly. Just added the through hole and the hole for the plug and beveled the top a bit. Sanded and polished it a bit with fine grit sandpaper and steel wool and then waxed it, plugged it up and added the leather bottom.

Now it's heating up and I'll let it run for an hour or two, while taking a well deserved nap 😴 😊




5 bilder in einem
 
Top Bottom