1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

Haze Square

Discussion in 'Portable Vaporizers' started by scottg402, Feb 3, 2016.

  1. O-G-Reg

    O-G-Reg Space-time aberration

    Messages:
    45
    Location:
    USA
    Ahh! Thanks for the snappy reaponse! Charging and parts are drying off excess iso! So hyped! Made my day getting this bad boy!
     
    Haze Vaporizers likes this.
  2. CloudMaker

    CloudMaker Member

    Messages:
    3
    @Haze Vaporizers My unit has stopped working after one day. Charged last night. Woke up with the solid green light on. I unplugged the unit but the green light remained on and it was unresponsive. When the battery died; that was it. Doesn't charge or do anything.
     
  3. KMizzy

    KMizzy New Member

    Messages:
    17
    Finally picked up my unit today (I was moving so I used a friend's address, finally picked it up from him). I am very happy with it. I have been following this thread for the past 30-40 pages so I knew what to expect. I've only taken 4 hits so far (I had work, so I shouldn't have taken so many, but couldn't resist). I haven't messed with the temps yet. I took the first 2 hits on the lowest setting, could taste it, but not much vapor. For the next 2 I used the middle temp and had much better results. The vapor and taste was great.
    I filled my bowl almost all the way up, barely tamped it down. I only filled one bowl so far, because if it didn't work well I wanted to be able to change something for the 2nd bowl. Hit it/suck it hard and hopefully you should be good to go.
    While it was charging I took it all apart, and without the cleaning/loading took it was hard to put back together, then I figgered out how to use that tool, and had no problems.
    Overall it is heavier than I expected, which isn't a bad thing, I'm strong enough to carry it . I'm excited to try it out more tonight, see what all the temps are capable of. I dont have a PC, so changing the temps might be a problem on the pro, but the 3rd temp worked well so far, and I'm guessing the 4th and 5th will too.
     
    Magistra and Haze Vaporizers like this.
  4. CloudMaker

    CloudMaker Member

    Messages:
    3
    @Haze Vaporizers responded via e-mail very quickly and are handling it. I have many vapes (EVO, Mighty, Firefly 2, PAX2, GhostMV1, Arizer Extreme, and now the Square) and this in one day had/has the potential to dethrone them all for my needs. The EVO and GhostMV1 are currently my favs. Oh well.......when my unit worked it was badass.
     
    FC123 likes this.
  5. TKraus

    TKraus Member

    Messages:
    34
    So I haven’t been on here in a while so I figured I should do an update. Got my unit and started using it. I definitely had to do a lot of adjusting but I finally got it locked in. Started using it with a water adapter and it was amazing with huge hits at 445F. I was charging it this morning when I decided to go for a hit. Didn’t unplug it, just turned it on and took a hit. I turned it off and it started charging again. Around a minute later I look over there is no red blinking light and the thing is smoking and combusting my herb. I go to unplug it and open it up to see that the coil and ceramic housing is red hot. Honestly got a little scared because I wasn’t sure if I was going to be able to shut it down. Sent an email and a pm to Haze Vape to get it sent in.
     
  6. FlyingLow

    FlyingLow Team NO SLEEP!

    Messages:
    3,141
    I went back to Haze today and had the great pleasure of meeting their team and learning about their history and growth, and I got an education on their Dual and Square.

    I was fortunate enough to receive a full walk-through of their products, it is like getting the whole thread experience in under an hour!:cool: Thanks for taking the time to guide me through it all!

    Really impressed with the quality of the persons and products- these are really great folks to be doing business with. Nothing was sugar coated, and I received honest straight forward feedback that addressed all my concerns. I learned how the square's heating element operates and how rushing to draw too soon can easily result in charring or worse. The unit puts out so much heat when warming up (blinking) and heat soaking the bowl, that you really must wait until the light goes green and the temps stabilize. The Square provide a remarkably fast heat up time, but if you do not give it time to properly reach green (when the temps stabilize), you risk combustion.

    Really a great experience today and I am looking forward to much more product research:rockon:
    Thank you HAZE!
     
  7. RogueGuy

    RogueGuy There's nothing like living in Southern Oregon

    Messages:
    72
    Definitely takes more than a gram to fill all 4. The nice thing is you can sip on them for a few days or power them down.

    Don't try to charge your Square in a hot car. Did not make it from mid battery to full in 2 hours and felt way too hot but kept trying. I unplugged it of course.
     
  8. jupazo

    jupazo Well-Known Member

    Messages:
    53
    Location:
    Land of rabbits
    Hi guys,

    Very excited about this vape to complete my mighty... I have access to second batch of them.. do you know if they are failing as the first one?? Thanks!
     
  9. Djsleepy

    Djsleepy Active Member

    Messages:
    176
    Location:
    In the South !
    Phase two is fine far as I k now .....I had a bad phase 1 got a phase 2 replacement and never looked back!

    Haze always takes care of their family !!!!!!!

    @FlyingLow Thank you for your research ! I have been trying my hardest to explain to some that if they draw on a cold unit to wait till it cools off....I got tired of combust from forgetting .....so I always push button and don't draw just to let heat up properly and avoid combust! Then second hit .....no worries......have not had a combust since!
     
    Last edited by a moderator: Jul 12, 2018
  10. ginolicious

    ginolicious Well-Known Member

    Messages:
    1,374
    Really starting to make 365 as my go to temperature now. I’ve been using it for 4 days on the same bowl. Had a stir once a day. And the bowl was nice and brown. Saw vapor on almost every hit. I usually used my Dual V3 around level 1 and 2. So using the Square at 365 seems to be what i usually use all my vapes at.
     
    stickstones likes this.
  11. Djsleepy

    Djsleepy Active Member

    Messages:
    176
    Location:
    In the South !
    That is hilarious .....that's my current go to.....copying again...man gino come up with so me stuff of your own...lol.....
     
    dood44 likes this.
  12. Magistra

    Magistra New Member

    Messages:
    6
    My phase 3 looks to be arriving on Saturday!

    Are there any videos of initial cleaning and set up? I have an outing on Sunday, so I’m hoping I can set everything up on Saturday night and be good to go on Sunday....may be expecting too much of myself, though.

    Also, people have been talking about the amount of material to put in each bowl. It’s my understanding that you can hit a bowl once and let it rest for a couple of hours, without loss of material. @ginolicious i think we like to medicate in similar ways, so I’m not worried about wasting a big bowl, right? I have been packing tiny bowls on my Solo 2 lately, as I feel like medicine evaporates a bit during the cool down period if you don’t finish it.

    Isn’t it funny how we (wellme at least!) are still affected by prohibition? I have so much easy access now, yet I still don’t want to waste any and feel bad not claiming the gunk in my Solo stems. (I don’t like to get over medicated and I’ve been worried about that concentrated stuff in there!)

    One last question about temps—you guy who are going above 428f, is that just for concentrates? I thought flower would combust above that temp? And must you go high for concentrates? I have some CO2 oil that I would like to try, probably sandwiched in flower.

    Thanks for all the great info here!
     
  13. ginolicious

    ginolicious Well-Known Member

    Messages:
    1,374
    @Magistra there should be a video online my Haze for cleaning. I believe they have two videos. One is 4 minutes. The other is 11 minutes.

    Yes, you can pack a full bowl and vape it over 4 days or more. Your material does not waste. This is a convection vape. Material is only vaporized as you draw air. So it will not vape unless you draw. Your solo has conduction going on and that’s why you are losing some material. This vape works best with full bowls. That’s why I pack full bowls. I only vape around 9pm and go to bed anywhere from 10-11pm. 5 hits is more than enough for me. Off a full bowl I get about 15-20 which is good for 4 days. Do not be worried about losing material. You see fine. Give it a try and see for yourself.

    Last night on a tail end of a bowl I only got 2 hits. But you got me high.
     
    Magistra likes this.
  14. RogueGuy

    RogueGuy There's nothing like living in Southern Oregon

    Messages:
    72
    Not Square related but curious about the legal environment in peoples states, prices, etc.

    I live in Oregon, which has dispensaries but better yet is a grow your own state that let's you grow between 4-12 plants.
     
    Last edited: Jul 12, 2018
  15. Magistra

    Magistra New Member

    Messages:
    6
    I’m in Connecticut. Flower at dispensaries runs $275-300 an ounce. It’s still a felony to crack a seed....

    I currently have to drive 45 minuets each way to the dispensary, but a closer one is opening. Just not sure as to when. I can buy 72 grams flower equivalent per month.
     
    RogueGuy likes this.
  16. JayPizzle

    JayPizzle New Member

    Messages:
    9
    Has anybody talked to Haze recently? I placed an order for some Square spare parts on July 3 and have not received tracking or any email explaining why. I've tried reaching out to them through email and through PM here but have not gotten anything back. I need to have my coil replaced and I've been wanting to do a thorough review on reddit. I've spoken highly of their customer service on reddit since the majority of reddit is skeptical about the Square due to the lack of its presence there. But this is not acceptable. The least Haze could do is tell me some items are on back order or give an explanation for why the item hasn't shipped out nearly 2 weeks after I ordered.
     
  17. O-G-Reg

    O-G-Reg Space-time aberration

    Messages:
    45
    Location:
    USA
    Square Pro first impressions after a tear down, clean, reassemble and 2 pods shared between two people...

    For this focusing on the product itself.

    Teardown and initial cleaning was easy enough.

    Reassembly: took me probably 45 minutes since I havent recieved my cleaning//loading tray yet. It was VERY hard to do. You need to line up all 8 metal pieces (4 pairs of screens and tops) in the silicon which isn’t too bad. Howver, you then have snugly insert the silicon with that whole assembly into one side of the square without any of the metal picecs becoming disloged or forming a bad seal... super tedious, took me 30 of the 45 on that alone....

    Got Good seals, burn off complete...

    Packed 2 with pretty dry herb once through a standard 3 chamber grinder.

    First drag setting 3.... nice piney lemon taste with modest visible vapor (as expected)!

    2nd hit... tons of vapor, great taste. Passed it to the GF who got the same results! ...first time using a portable vape for both of us. Definitely a success!

    Bumped temp to stock preset 4 for the remainder. Did a few double presses: drag while green then half way press again. I know this isn’t intended use, but it worked for me and I did not combust! Huge clouds Very nearly as big as bong combustion!!

    ABV was good not great. Without double presses on the first pod, i still had some green around the edges. Not comfortable pointing fingers at the square for this. It was my first go. i very well may need a finer grind or different packing technique. Going to analyze my abv tn or tomorrow in better light and prior to using it...lol..

    Solid unit, seems well made.

    I’ll post a full review after some more time with it including the whole experience and accessories

    Initial impressions from a dude who just got his first vapes this month: VERY SATISFIED so far!
     
    dood44, Haze Vaporizers and Shrike like this.
  18. ginolicious

    ginolicious Well-Known Member

    Messages:
    1,374
    Keep an eye on that coil if you intend to double press. Will warp coil. Will make coil wear faster. And it can certainly create hot spots in your bud.
     
  19. O-G-Reg

    O-G-Reg Space-time aberration

    Messages:
    45
    Location:
    USA
    After my order I did not get any tracking, just an automatic email recipt, and my unit just showed up one day. I think they may be on backorder for some parts like the cleaning//loading tray. They’re probably swamped too. Stay vigilant and keep us posted. GL :cool:
     
    Haze Vaporizers likes this.
  20. RogueGuy

    RogueGuy There's nothing like living in Southern Oregon

    Messages:
    72
    @Haze Vaporizers should probably consider including the cleaning/loading tray in the initial purchase package.
     
  21. MinnBobber

    MinnBobber Well-Known Member

    Messages:
    3,937
    ....................................
    X2 at least include it with the Pro version :)
     
  22. Shrike

    Shrike Flower Potted

    Messages:
    1,185
    Location:
    Hyperion
    ^^^I agree...even if it means a small price bump. It seems essential to assuring a proper seal with much less hassle, not to mention probably a reduction in CS questions. :nod:
     
  23. O-G-Reg

    O-G-Reg Space-time aberration

    Messages:
    45
    Location:
    USA
    Its currently inculded, i think theyre just out of them right now
     
    dood44 and Magistra like this.
  24. RogueGuy

    RogueGuy There's nothing like living in Southern Oregon

    Messages:
    72
    @Haze Vaporizers will you be making the air path / heater silicone seal available for replacement? It's the only one that ends up getting ISO on it
     
    Last edited: Jul 12, 2018
  25. Haze Vaporizers

    Haze Vaporizers Well-Known Member Manufacturer

    Messages:
    335
    The silicone seal replacement is available on our website I think. Yes the easy load trays are included but we are currently out. Expecting them tomorrow. We try to respond every PM, every post as quick as we can. Anyone who had missing items in the package, or missing accessory orders, they are coming...
     
    Last edited: Jul 12, 2018
    dood44 and Shrike like this.

Support FC, visit our trusted friends and sponsors