Discontinued Omicron Vaporizer for oils

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
THC- what is the current price range your looking at for the glass you guys are going to make? any idea what types of glass? (Bubblers, Tubes, Concentrate rigs)


That is something we are not looking into anymore, we are gearing up to produce our own and have a glass blowing studio of our own.
 
THC SCIENTIFIC,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
710 special is a 16 cartridge unit? :o

rofl the double nail carts killed that guy!

common G give a shoutout to fc... aww I think he's done that was sweet though!

Ok I give up, what is "beeze in the trap"? lol

Why can't I stop watching now that they're playing fail videos; they brought back the Persei! The guy looks happy with it :tup:


Yes the 710 special is 16 cart unit.

When you saw breal give his persei away on screen that was to me, i gave it back. Its a little hard to get people to learn how to use that bad boy, but im working with Breal to get it down.
 
THC SCIENTIFIC,

Darb

Well-Known Member
Ok lcd top for PErsei, but since now you guys are wanting it, i asked my engineer to see if we can do a lcd top for the omicron.


His response was G your killing me. I cant do miracles. So we shall see.

I didnt think the LCD was originally for the omicron. Thanks G.
 
Darb,

druminfected

Well-Known Member
Hey, drum, look back a couple pages, G went over this, but the protection system in the v2 top limits voltage to 3.7. So a fresh 18650 in persei @ 4.2v is a lot hotter.

oh ok that's what that meant. I read that but didn't quite understand what it was all about thank you.
Can you show me the bottom cap? Does the blue light flicker?

I assume your talking about the bottom cap of the omicron V2? If so here is the bottom cap. Took some pics on phone and upload to pc and then uploaded on net for ya.
j5l313.jpg

2mdmr9y.jpg
 
druminfected,

wb21

Member
That is something we are not looking into anymore, we are gearing up to produce our own and have a glass blowing studio of our own.

Ya i knew you were going to blow your own glass. I was wondering what kinds of tubes you were going to make and if they are going to be very expensive like most of the glass on ALT. I don't have any glass and have been very impressed with the persei so I want to see what you guys are going to make glass wise because if its up to your current standards i don't mind waiting to see what you guys produce.
 
wb21,

vapor 4 life

Well-Known Member
I have not ordered carts since the release of the 1.5 ohm cart and I am about to order two packs for me and a friend. I like the sound of the bigger quicker hit from the 1.5 but would love some advice.. How hard is it to kill a cart? And is the hit bigger and faster? Is it harsher? Should I buy two packs of 1.5 s or one of each.
 
vapor 4 life,

Bob Loblaw

Astralnaut
I have not ordered carts since the release of the 1.5 ohm cart and I am about to order two packs for me and a friend. I like the sound of the bigger quicker hit from the 1.5 but would love some advice.. How hard is it to kill a cart? And is the hit bigger and faster? Is it harsher? Should I buy two packs of 1.5 s or one of each.
personally i would go for 1.5 - i haven't killed a cart yet. much bigger, much faster. i usually am using shatter or close which takes a lot and it works for me
 
Bob Loblaw,
  • Like
Reactions: rufrothy

Ewog

Member
Does anyone clean their fill tool after they use it each time? or do you just keep using it over and over and let some of the waxes/oils mix?
 
Ewog,

Blue Dream

Member
I have not ordered carts since the release of the 1.5 ohm cart and I am about to order two packs for me and a friend. I like the sound of the bigger quicker hit from the 1.5 but would love some advice.. How hard is it to kill a cart? And is the hit bigger and faster? Is it harsher? Should I buy two packs of 1.5 s or one of each.
I find that the 1.5s are prone to leakage when using oils (I lost a gram of pure gold). I also find that the 1.5s still clog easily and gets restrictive flow.
 
Blue Dream,

Blue Dream

Member
Does anyone clean their fill tool after they use it each time? or do you just keep using it over and over and let some of the waxes/oils mix?
I don't. Let what little residue is in the funnel mix with whatever I'm using next. I'm really too lazy.
 
Blue Dream,

vapor 4 life

Well-Known Member
@ bob loblaw I also only use shatter or glass bho in the omi The last batch of shatter I got stays glassy even warmer than past batches. i loaded two 2.4 carts with it and could not get either to prime. I have not had a dud cart yet and assume maybe my oil was too glassy to prime. have you had this problem? The cart got warm but would not hit just the nasty taste from the cart. do you think the hotter nature of the 1.5s will help? Has anyone else had a hard to prime more solid oil?
 
vapor 4 life,

Bob Loblaw

Astralnaut
@ bob loblaw I also only use shatter or glass bho in the omi The last batch of shatter I got stays glassy even warmer than past batches. i loaded two 2.4 carts with it and could not get either to prime. I have not had a dud cart yet and assume maybe my oil was too glassy to prime. have you had this problem? The cart got warm but would not hit just the nasty taste from the cart. do you think the hotter nature of the 1.5s will help? Has anyone else had a hard to prime more solid oil?
yea, the other guy is using pure gold which is super runny and must be babied at that wattage. you'll be much happier w/ the 1.5
 
Bob Loblaw,

Ewog

Member
@ bob loblaw I also only use shatter or glass bho in the omi The last batch of shatter I got stays glassy even warmer than past batches. i loaded two 2.4 carts with it and could not get either to prime. I have not had a dud cart yet and assume maybe my oil was too glassy to prime. have you had this problem? The cart got warm but would not hit just the nasty taste from the cart. do you think the hotter nature of the 1.5s will help? Has anyone else had a hard to prime more solid oil?


my last fill of honeycomb wax was really hard to prime and get going at first, I spent almost 2 hours heating the cart(2.4ohm) and trying to hit it over and over again till it finally got melted down. Then it started hitting really good, just took 2 hours of work haha. All my other cartridges I've been able to load in less then 20 minutes.
 
Ewog,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
does the blue light flicker?



oh ok that's what that meant. I read that but didn't quite understand what it was all about thank you.

I assume your talking about the bottom cap of the omicron V2? If so here is the bottom cap. Took some pics on phone and upload to pc and then uploaded on net for ya.
j5l313.jpg

2mdmr9y.jpg
 
THC SCIENTIFIC,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Ya i knew you were going to blow your own glass. I was wondering what kinds of tubes you were going to make and if they are going to be very expensive like most of the glass on ALT. I don't have any glass and have been very impressed with the persei so I want to see what you guys are going to make glass wise because if its up to your current standards i don't mind waiting to see what you guys produce.


Our glass will be through us only if i am not mistaken, but until we produce it i dont know what the cost will be. Different pieces different work and different prices.
 
THC SCIENTIFIC,

Silvercloud538

Well-Known Member
how often do you guys switch batteries in the v2?


Having been a '"viper'"' :spliff: for well over 'half a century' :myday: ,me found it's necessary

to recharge '"every 2-2.5 hrs"' :ugh::ugh: [one of the reasons me moved over to the 1300's

(mAh)] ,at least 'til the '"O-PHOS"' :smug: arrived ~ now me doesn't get concerned :nope:

'bout batts !! :tup::):tup:
 
Silvercloud538,

Blue Dream

Member
THC,
Are new carts planned that are more leak resistant with oils and more resistant to clogging and air flow restriction?

I just lost most of a gram of pure gold due to a leaking 1.5 cart that was clogged and congested.
 
Blue Dream,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
THC,
Are new carts planned that are more leak resistant with oils and more resistant to clogging and air flow restriction?

I just lost most of a gram of pure gold due to a leaking cart.

Yes we have a engineering conference this weekend and have a concept planned out and hopefully will get into prototypes.
 
THC SCIENTIFIC,
  • Like
Reactions: Blue Dream
Top Bottom