XVape XLUX ROFFU

Dee Based

Dee Based

Member
Hi,
I just got a Roffu and was very happy with it for about a week, but now it doesn't produce nearly the vape clouds it used to.

I pack the bowl lightly, with a medium grind so there should be plenty of airflow. I clean the mouthpiece filter on both sides (bottom and top), make sure the rubber grommet around that mouthpiece screen is seated securely. Check the mouthpiece part of the cap to make sure it's also seated securely and not letting in air. Unit heats up to 400 degrees, but no matter if I draw slow or fast I get very little vapor now. I'm holding my finger over the "carb" keeping it closed the whole inhale. Big change from new. Anybody here dealt with this and hopefully found a fix?

PS - I took the round white silicone piece out of the glass tube. And it seems sort of stable now, and it holds the weed in the "bowl" but it's in there very lightly, any poke with a cleaning tool knocks it loose. The unit itself gets hot, but I'm just getting cool air out of it.
 
Last edited:
Dee Based,
  • Like
Reactions: LesPlenty
bulllee

bulllee

Agent Provocateur
Dee Based said:
Hi,
I just got a Roffu and was very happy with it for about a week, but now it doesn't produce nearly the vape clouds it used to.

I pack the bowl lightly, with a medium grind so there should be plenty of airflow. I clean the mouthpiece filter on both sides (bottom and top), make sure the rubber grommet around that mouthpiece screen is seated securely. Check the mouthpiece part of the cap to make sure it's also seated securely and not letting in air. Unit heats up to 400 degrees, but no matter if I draw slow or fast I get very little vapor now. Big change from new. Anybody here dealt with this and hopefully found a fix?
Click to expand...
Try pushing the oven down all the way , worked for me. I really like my Roffu, It's my choice for vaping on the go :tup:.
 
Petetbay

Petetbay

Well-Known Member
Dee Based said:
Hi,
I just got a Roffu and was very happy with it for about a week, but now it doesn't produce nearly the vape clouds it used to.

I pack the bowl lightly, with a medium grind so there should be plenty of airflow. I clean the mouthpiece filter on both sides (bottom and top), make sure the rubber grommet around that mouthpiece screen is seated securely. Check the mouthpiece part of the cap to make sure it's also seated securely and not letting in air. Unit heats up to 400 degrees, but no matter if I draw slow or fast I get very little vapor now. I'm holding my finger over the "carb" keeping it closed the whole inhale. Big change from new. Anybody here dealt with this and hopefully found a fix?

PS - I took the round white silicone piece out of the glass tube. And it seems sort of stable now, and it holds the weed in the "bowl" but it's in there very lightly, any poke with a cleaning tool knocks it loose. The unit itself gets hot, but I'm just getting cool air out of it.
Click to expand...
If you can try an alternative battery, there’s definitely something wrong if you don’t have any air leaks in the mp, should have lots of vapor at 400.

”Try pushing the oven down all the way” yes, make sure the bowl clicks in the bottom.
 
LesPlenty

LesPlenty

Well-Known Member
Company Rep
Dee Based said:
but now it doesn't produce nearly the vape clouds it used to.
Click to expand...
Great advice above, also, if your troubles started after cleaning/disassembly, ensure the grommet (called a filter on page 3 of the Roffu manual, the silicon part above the spiral is the part I usually insert the wrong way around but that just restricts airflow) above the oven is installed with the lip facing up as this can also let extra air in...let us know how you get on @Dee Based :tup:

I have just had a Carpal Tunnel operation so I have no use of my right hand for a week or so and have found the Roffu is a great help for 1 handed use. The capsules pre-loaded to start and I can even manage a battery swap one-handed...easier than typing this!
 
Last edited:
Sativapo

Sativapo

Well-Known Member
You can indeed oncrease the extraction n'y partially covering the intake. I don't think that's his problem.
 
Dee Based

Dee Based

Member
Hi and thanks for the replies! I'm still getting cool air and almost no vapor. The cap is pretty much airtight, so I don't 'think' that's an issue. The heating unit is stable and doesn't wobble or anything.

I see that there are O-rings included with the spare filter. Where do they go?
 
Dee Based,
  • Like
Reactions: LesPlenty
vapviking

vapviking

Old & In the Way
Dee Based said:
It was the O-ring. I tried rolling it to the bottom of the glass stem, which sealed the opening around the heater and stem.

It's Sunny in Philadelphia, but Cloudy here!

Anyone have specs on those O-rings, or a good source?
Click to expand...
Glad you are getting somewhere.
I believe the spare orings are supposed to be the one that wraps around (sitting in a groove) the screen - - the screen that 'floats' inside the glass chamber. So, in that way it does seal the space between the heater and the glass chamber.

Did you push it down inside the device, around the heater tube?
 
vapviking,
  • Like
Reactions: LesPlenty
LesPlenty

LesPlenty

Well-Known Member
Company Rep
Dee Based said:
Where do they go?
Click to expand...
As explained, these go on the filter in the heating chamber, shown here,
Roffu-Glass-Chamber-002.jpg

vapviking said:
Did you push it down inside the device, around the heater tube?
Click to expand...
I still run my OG without any seal in the bottom of the heater post of the main unit, my chambers seal quite well without it and newer versions only have a snap ring securing the heater chamber, no seals.:tup:
 
LesPlenty,
  • Like
Reactions: vapviking
Dee Based

Dee Based

Member
Mine didn't come with the metal disc. It has a white plastic disc that goes in the heating chamber. I'm also worried about that part when it needs to be replaced.

I tried the o-ring on that plastic disc in the heating chamber and it wouldn't stay on but it does solve the problem when I have it installed the way in this picture.

IMG-20240611-070505.jpg
 
Last edited:
Petetbay

Petetbay

Well-Known Member
Dee Based said:
Mine didn't come with the metal disc. It has a white plastic disc that goes in the heating chamber. I'm also worried about that part when it needs to be replaced.

I tried the o-ring on that plastic disc in the heating chamber and it wouldn't stay on but it does solve the problem when I have it installed the way in this picture.

IMG-20240611-070505.jpg
Click to expand...
Well that’s different, plastic? Maybe ceramic?
 
Petetbay,
  • Like
Reactions: LesPlenty
LesPlenty

LesPlenty

Well-Known Member
Company Rep
Haulien said:
Feels ceramic but would definitely love confirmation from xvape.
Click to expand...
It is now ceramic for less metal in the vapor path as many people want.
Dee Based said:
but it does solve the problem
Click to expand...
Are you hearing the loud 'click' when you insert the oven into the body of the vape? It takes a fair amount of pressure to get the oven to seat properly when new.
Haulien said:
It's a shame JoDa doesn't do accessories for the roffu anymore 😢
Click to expand...
That is a shame, he makes nice stuff but easy enough to make/put together your own equivalent,
 
kiddvudu2

kiddvudu2

Well-Known Member
LesPlenty said:
DDave has Ti or stainless steel (8.5mm diameter), any Dynavap screen will fit.
www.ddavemods.com

VapCap Mesh Screen Replacements

VapCaps are great-working vaporizers! And just like any other vaporizer, they work best when clean.Finally! An economical option for VapCap screens!These screens replace the internally-installed VapCap screens with your choice of 316 Stainless Steel or Titanium mesh screens. Both the SS and Ti...
www.ddavemods.com
I also use an 8 or 9mm leather hole punch to make my own from cheap pipe filters.
I got a kit so I can make filters for any occasion, similar to this,
Click to expand...
I purchased a punch kit a few months back but have only used it to create 2 screens for my MP filter so far. They work great compared to the stock filter which is such a resin trap (as you noted). However, the ones that I created have very tattered edges, so that they end up not staying perfectly round after a few insertions/removals from the rubber grommet. Maybe the SS mesh I'm starting with is too heavy/thick. When I am actually making them (using the punch kit), I have to hammer very hard several times to get it to punch through and they come out pretty bent up. Because of this, I'm considering ordering some of those DDave screens you linked. Do you prefer the Ti or SS as far as keeping clean goes? Do you have a recommendation for a "best" material to create your own with (using the punch tools)?

Peese & Thanks @LesPlenty!
 
LesPlenty

LesPlenty

Well-Known Member
Company Rep
kiddvudu2 said:
Do you prefer the Ti or SS
Click to expand...
I think the Ti stay cleaner, not sure but I have them in 2 of my units now.
kiddvudu2 said:
I have to hammer very hard several times to get it to punch through and they come out pretty bent up
Click to expand...
You could try a harder material under the mesh when you punch them. I went from wood to now using aluminium (my vice's soft jaws) but either still take a bit of hammering. The punches do get blunt and can be easily sharpened if you have a grinder...or simply replace them when they get blunt as they are usually very cheap (at least the ones I get).
kiddvudu2 said:
Do you have a recommendation for a "best" material to create your own with (using the punch tools)?
Click to expand...
I find the Storz&Bickel filters make great donors for resizing.:tup:
 
LesPlenty,
  • Like
Reactions: kiddvudu2
M

Marko94

New Member
Petetbay said:
The V3Pro and Starry bubblers use the same glass and will fit in the Roffu wpa, but they not very good I prefer the POTV glass bubblers and they fit as well. The new Gordito bubbler looks good.:2c:
Click to expand...
Yeah, but is not easy to find it here. Mostly I only have options on Magicvaporizers..

Asking about bubbler because still thinking if I choose correct DHV :)
 
Marko94,
Petetbay

Petetbay

Well-Known Member
Marko94 said:
Yeah, but is not easy to find it here. Mostly I only have options on Magicvaporizers..

Asking about bubbler because still thinking if I choose correct DHV :)
Click to expand...
Yeah there’s not much choice there the Xmax bubblers and a few others that they don’t give the joint size, but there’s one from Wolkenkraft that’s similar to the POTV bubblers as their devices are rebadged Healthy Rips devices. I think it should work.

magicvaporizers.com

Wolkenkraft ÄRiS - Glass Bubbler

This Glass Bubbler was specially developed for the Wolkenkraft ÄRiS and allows you to filter the vapour through water to make it both cooler and more pure. To use it, all you have to do is to remove the mouthpiece and replace it with the glass bubbler filled with water. You are now ready to...
magicvaporizers.com magicvaporizers.com
 
M

Marko94

New Member
Petetbay said:
Yeah there’s not much choice there the Xmax bubblers and a few others that they don’t give the joint size, but there’s one from Wolkenkraft that’s similar to the POTV bubblers as their devices are rebadged Healthy Rips devices. I think it should work.

magicvaporizers.com

Wolkenkraft ÄRiS - Glass Bubbler

This Glass Bubbler was specially developed for the Wolkenkraft ÄRiS and allows you to filter the vapour through water to make it both cooler and more pure. To use it, all you have to do is to remove the mouthpiece and replace it with the glass bubbler filled with water. You are now ready to...
magicvaporizers.com magicvaporizers.com
Click to expand...
Do you think that Wolkenkraft Bubbler will work on Xmax V3 pro ?
 
Marko94,
You must log in or register to reply here.
Top Bottom