XVape XLUX ROFFU

Petetbay

Well-Known Member
Are there any good deals in Germany or canada you can recommend?
VPM(Canada) has 20% off site-wide with code 420. Their Roffu is the lite kit, need to add the steel chamber as lite only has the glass chamber and the wpa is also a necessity.

 

bulllee

Agent Provocateur

LesPlenty

Well-Known Member
Company Rep
Are there any good deals in Germany or canada
VPN as listed by @Petetbay plus the following for EU,
The code 420 will get you 10% discount there.
Any other links peeps have to EU/Canada they want to share? The info would be great to help members out as my other links are out of stock.:cheers:
 
Roffu Battery Question:
The factory battery is an 18650 @ 3200mAh. Has anyone tried a higher capacity battery like a 3800mAH? Or is it best to stick with the stock battery capacity?
Thanks
Phil
 
Philossifer,
  • Like
Reactions: LesPlenty

cannabis.pro

aka 420EDC
Accessory Maker
Roffu Battery Question:
The factory battery is an 18650 @ 3200mAh. Has anyone tried a higher capacity battery like a 3800mAH? Or is it best to stick with the stock battery capacity?
Thanks
Phil
Capacity doesn't matter.

You want a battery with Continuous Discharge Rating of 10A or more (not to be confused with Maximum Discharge Rating which is a totally different specification). That's the only part that matters in selecting a battery for the Roffu.

If you are seeing 3800mAh out there, you should consider another vendor because that is beyond the 18650 specification we are aware of (meaning they've exaggerated the capacity).
 

LesPlenty

Well-Known Member
Company Rep
Or is it best to stick with the stock battery capacity?
I use LG HG2 and Sony VT6 18650 batteries if not the OG, both 3000mah and both get extra sessions over the OG. That said, Molicell seem to be the battery of choice for vaping, the P28a (2800mah) or their new P30b(3000mah).
As @cannabis.pro said, the 3800mah is a red flag, make sure you purchase from a reputable seller as there are a lot of dodgy battery sellers on the web.
These guys are reportedly good,
And info for you on 18650 batteries,
 

LesPlenty

Well-Known Member
Company Rep
Vapefully ships from Poland (EU). At the moment
Thanks for that, I now have it bookmarked for future needs.:tup:
Here is a link if anyone needs it.
Edit to fix error, thanks @CaGe-Man
 
Last edited:
LesPlenty,
  • Like
Reactions: 420pt

CaGe-Man

New Member
Thanks for that, I now have it bookmarked for future needs.:tup:
Here is a link if anyone needs it, use code 420 to get another 10% off.
Code doesn't work on Sale Product's, but still a decent price for Europe
 
CaGe-Man,
  • Like
Reactions: LesPlenty

Avenger772

New Member
So I got the roffu and tested it out it out and I don't know I feel like doing pulls on this thing requires some effort. Maybe I'm grinding the product too much? I don't know. Does anyone has any suggestions on the best set up for this thing for the best air flow?
 

Madtater

Well-Known Member
So I got the roffu and tested it out it out and I don't know I feel like doing pulls on this thing requires some effort. Maybe I'm grinding the product too much? I don't know. Does anyone has any suggestions on the best set up for this thing for the best air flow?
Make sure your fingers/hand aren't covering the holes on the side.

I made that mistake.

Also. Light pack. Not packed solid, just a soft pack.

The dosing caps work really well. I found myself enjoying the SS oven with the caps the most.
 

LesPlenty

Well-Known Member
Company Rep
I feel like doing pulls on this thing requires some effort.
The Roffu does have a bit of restriction compared to some vapes but the advice above will help negate that a bit. I never tamp at all with the glass oven, I just scrape the top off to level if overfilled.
The dosing caps work really well. I found myself enjoying the SS oven with the caps the most.
I have been doing the same lately instead for easy mouth-pulls on the WPA for that joint-like experience but still enjoy the odd all glass on a j-hook...it depends on the situation and what I feel like. The extra conduction from the dosing cap/steel oven is great before bed.:tup:
 

LesPlenty

Well-Known Member
Company Rep
I have been informed that the Roffu firmware will not be user-updateable in the foreseeable future. I am still waiting on info about getting the cooling unit's cooling cap added as a separate unit for sale and will update here when I get an answer.:tup:
 
I have been informed that the Roffu firmware will not be user-updateable in the foreseeable future. I am still waiting on info about getting the cooling unit's cooling cap added as a separate unit for sale and will update here when I get an answer.:tup:
Thank you my friend!
 
Philossifer,
  • Like
Reactions: LesPlenty

LesPlenty

Well-Known Member
Company Rep
I have asked for another update on listing the cooling unit body separately, hope to hear something soon.
My OG Roffu is now just over 2 years old and the puff counter has just reached 10,000.:cool:
1716131147171-jpg.54063

I did find out the puff counter does not advance by simply turning it on as my counter was on 09995, and I wanted a 10,000 pic and tried to advance the counter for the pic...3 sessions later the counter was still on 09995...it only went up after I puffed on it.
I ran the test using 2x 6-minute sessions at 190c/375f as before but left my silicone armor sleeve. It must have skewed the test as I got 1 extra (11 in total) 6-minute session with the old battery compared to 2 years ago!
I have never looked after this battery, always runs to dead flat and is charged straight after use, so I was surprised to see the internal resistance is still only 45m/ohm (this is less than when brand new:hmm:) with a capacity of 2563mAh.
I just rerun the test without the silicone sleeve and let the unit cool between every second session and I still managed 8x 6-minute sessions from the old battery. I also let the battery cool before charging and my Nitecore SC4 charger says the internal resistance is only 51m/ohm with a capacity of 2430mAh...this test,
1716131079360-jpg.54064

OG test from 2 years ago,
1656039901819-jpg.38091

So overall I am more than happy with how well this 18650 battery is holding up and the Roffu is still chugging away nicely too.:tup:
 

Petetbay

Well-Known Member
My OG Roffu is now just over 2 years old and the puff counter has just reached 10,000.:cool:
My OG which I used maybe 4x more than my newer version is still at 2200, while the new one is at 5500. The OG never seems to count much since I had it.

Sporting Rogue Wax Works 3D stem for a Sticky Brick, works nice in Roffu and V3Pro, didn’t fit my Sticky Bricks or Rogue.

 
Last edited:

vapviking

Old & In the Way
I like using the Roffu for certain times, like in the morning or in the car.
The first one I had, a very early model, developed the habit of getting warm (the heater element would briefly warm, then stop) simply on insertion of a fresh battery. It was replaced under warranty.

The replacement has been fine to this point, except after several months it lost the ability to charge the battery internally, so I always charge externally now.

Today, in my pocket, with no provocation, the device warmed enough to feel on the outside as though I had just done a short session. This is unacceptable.

My total Roffu experience has been 18 months. I only paid $99US for my full kit.
As much as I've enjoyed the occasional use, I think I'm just going to retire this vape.
 
vapviking,
  • Like
Reactions: LesPlenty

LesPlenty

Well-Known Member
Company Rep
The first one I had, a very early model, developed the habit of getting warm (the heater element would briefly warm, then stop) simply on insertion of a fresh battery.
My OG still acts this way and as you said, these were replaced where necessary under warranty (not all had this glitch).
Today, in my pocket, with no provocation, the device warmed enough to feel on the outside as though I had just done a short session. This is unacceptable.
Sorry to hear you have an ongoing problem with the Roffu, please start another RMA as this problem has been fixed (auto firing)...you must have just been unlucky with your replacement as this is the first I have heard of a unit not being able to charge batteries in the unit.
 
Last edited:
LesPlenty,

vapviking

Old & In the Way
My OG still acts this way and as you said, these were replaced where necessary under warranty (not all had this glitch).

Sorry to hear you have an ongoing problem with the Roffu, please start another RMA as this problem has been fixed (auto firing)...you must have just been unlucky with your replacement as this is the first I have heard of a unit not being able to charge batteries in the unit.
Warranty is 12 months, my roffu is older than that. You are suggesting I try, regardless?
 
vapviking,
  • Like
Reactions: LesPlenty

vapviking

Old & In the Way
I was thinking your replacement may not have been that old, worth a try if you explained it is the old problem rearing its head (the auto ghost sesh/puff) and you only just noticed it happening.
I just don't have the motivation at the moment, for an issue that was corrected, and I apparently have an un-corrected device as replacement? Even though symptom is slightly different, the device powers on, like the first time, unprompted.

Roffu has had a couple of other issues that they have tried to correct on the fly, like the wobbly chamber, for which they would send a new oring and special tool? IF one knew enough to ask for said fixes.

In a perfect world, the manufacturer would have sent the orings out to everyone known to have purchased a Roffu. And in that perfect world, I would have been notified that my device could be potentially dangerous, and they'd have sent appropriate devices as replacement.

This world is not perfect. This is a hundred dollar Chinese-made consumer product, some things fall through the cracks.

I am not really annoyed, just slightly disappointed. I've had a nice ride for my hundred bucks.
 
vapviking,
  • Like
Reactions: LesPlenty

LesPlenty

Well-Known Member
Company Rep
Roffu has had a couple of other issues that they have tried to correct on the fly, like the wobbly chamber, for which they would send a new oring and special tool?
That fix was canned, it was too hard for many people to swap (me included, I use my OG with no o-ring) so in the end any peeps that presented with that problem (to me at least) simply had their units replaced.
 
LesPlenty,
Top Bottom