gangababa
Well-Known Member
According to the Tinymight web site, they are not interchangeable.
Their accessories page has a note for each model glass-replacement part, saying it is not compatable with the other model.
TinyMight / TM 2
- Thread starter kuzko
- Start date
Their accessories page has a note for each model glass-replacement part, saying it is not compatable with the other model.
Thank you, should've checked the site beforehand!
Re: TM2 batteries. I know the TM website lists Molicel P26A/P28A, SONY VTC6, Samsung 30Q and LG HG2 as their recommended batteries for the TM2 and I know it's recommended that any battery used in the TM2 be rated for at least 30A output. My question is -- what about other 18650 batteries with higher ratings -- like the Molicel P42A? The P42A is rated for 4,200mAh and 45A, so it's a beefier and hopefully longer lasting battery. Would using a Molicel P42A be OK in a TM2?
EarthworldTim
Well-Known Member
P42A is a 21700 battery, not an 18650. Won't work because it's a bigger battery size.
Aha! That definitely settles that. Thanks for that info.
checkyourlibido
Well-Known Member
Thankfully they haven't made a TM with a 21700, I would buy a TM+ with a 21700 in a heartbeat, but I already spend too much(or do I?)
RustyOldNail
SEARCH for the treasure...
Amp ratings are often inflated…..
Bench Test Results: Molicel P28A (2021-dated) - 35A 2800mAh 18650
These tests below only note my personal ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This is one of the...
www.e-cigarette-forum.com
“This 35A rating not a true continuous current rating you can use to compare against other cells. The P28A will get almost hot enough to boil water if run continuously at 35A down to its 2.5V cutoff. In my opinion Molicel rated this cell for its intended use in power tools and other applications where the cells are used only for short periods of time at high current levels.
So while you can run this cell for short periods at 35A I recommend staying at 25A or lower to help improve performance (reduce voltage sag), extend cell life, and reduce the risk of going over the 60°C limit.”
sickmanfraud
Well-Known Member
Premium Stainless Steel 1/2” Easy Fit Bowl Shape Pipe Screen Filters (25 pack) | eBay
Suitable for most pipe bowl. Bowl shaped for easy fit and replace.
www.ebay.com
Cloud McLongFoot
Well-Known Member
Damn those look like a great size, why all the screens gotta b in US haha
Orvaxxx
Well-Known Member
Will these fit as screenbaskets?
sickmanfraud
Well-Known Member
no no no
@cloud, The baskets I linked to 3 posts above will ship internationally. They also come pretty quickly.
Orvaxxx
Well-Known Member
Yes, they ship internationally, but shipping to the Netherlands costs more than the screens.
Vaporific
All who wander are not lost...
I again reached out to TM asking if there was any updates on Purpleheart/RED for the TM2 and received the following reply (I also wrote them a couple of months ago without a reply and wasn’t concerned at all then):
“Sadly this purple heart production is not going well, wood just keeps changing dimensions and shrinks and we cannot get it into condition that will make a tight fit to the metal panels and not have lightleaks. We really hoped that artificial drying process will speed up things ,but i guess we just either got a material that was really moist or just purpleheart is not suitable for production of TM2. THat being said we are going to explore alternative exotics and another source of PH, but we gonna order small samples first ,because we dont wanna find ourself sitting on bunch of useless wood again .
Please be sure that if ever an exotic pops out ,you can be first on the list and have a pick, i am sorry that we have strained your nerves and patience to this extent but it is a bit the same to us . We are making progress in other departments like Quality Control Testing and did some other small revisions , hopefully it would translate in less warranty cases,so we are really working constatly on making things better .
Thank you very much for the kind words and patience !Have a nice day !”
My nerves aren’t strained, LOL. I’d love a TM2 to compliment my TM and have as a backup. We’ll see. It will take more time for another wood variation, if any at all. We’ll see. I’ll let the TM experts figure it all out. I’ll simply keep enjoying my OG TM - BEST. VAPE. EVER!
“Sadly this purple heart production is not going well, wood just keeps changing dimensions and shrinks and we cannot get it into condition that will make a tight fit to the metal panels and not have lightleaks. We really hoped that artificial drying process will speed up things ,but i guess we just either got a material that was really moist or just purpleheart is not suitable for production of TM2. THat being said we are going to explore alternative exotics and another source of PH, but we gonna order small samples first ,because we dont wanna find ourself sitting on bunch of useless wood again .
Please be sure that if ever an exotic pops out ,you can be first on the list and have a pick, i am sorry that we have strained your nerves and patience to this extent but it is a bit the same to us . We are making progress in other departments like Quality Control Testing and did some other small revisions , hopefully it would translate in less warranty cases,so we are really working constatly on making things better .
Thank you very much for the kind words and patience !Have a nice day !”
My nerves aren’t strained, LOL. I’d love a TM2 to compliment my TM and have as a backup. We’ll see. It will take more time for another wood variation, if any at all. We’ll see. I’ll let the TM experts figure it all out. I’ll simply keep enjoying my OG TM - BEST. VAPE. EVER!
Does anyone have any recommendations for a smell proof bag for the TM2?
I'm after something that
* Keeps smells in
* Can take a 100mm stem (a bit longer than the stock titanium stem which is 80mm)
* take 2 - 4 5ml glass pots (small herb pots)
* Take 2 additional spare batteries
* Is relatively small .. so takes the above but not too much more as I want this for when I'm out and about, hence I dont want to take the rest of my kit with me.
Look forward to what you guys might come up with
I'm after something that
* Keeps smells in
* Can take a 100mm stem (a bit longer than the stock titanium stem which is 80mm)
* take 2 - 4 5ml glass pots (small herb pots)
* Take 2 additional spare batteries
* Is relatively small .. so takes the above but not too much more as I want this for when I'm out and about, hence I dont want to take the rest of my kit with me.
Look forward to what you guys might come up with
RustyOldNail
SEARCH for the treasure...
If you type “smell proof bag”, in the “search this thread” box, there are a bunch of previous posts with member suggestions!
Some more relevant then others.
imor jones
Well-Known Member
Maybe this one could fit your needs. I have it and its good!
FIREDOG Smell Proof Bag with Lock, Carbon Lining, Odor Proof, for Travel, Black, 20 x 10 x 8 cm, gray https://amzn.eu/d/bZ7ZZDW
BabyFacedFinster
Anything worth doing, is worth overdoing.
I bought this bag several months ago and it works well. No smell when you zip it closed, and I keep dirty grinders and smelly stems in it.
I feel really lucky that Walnut is my favourite wood.I again reached out to TM asking if there was any updates on Purpleheart/RED for the TM2 and received the following reply (I also wrote them a couple of months ago without a reply and wasn’t concerned at all then):
“Sadly this purple heart production is not going well, wood just keeps changing dimensions and shrinks and we cannot get it into condition that will make a tight fit to the metal panels and not have lightleaks. We really hoped that artificial drying process will speed up things ,but i guess we just either got a material that was really moist or just purpleheart is not suitable for production of TM2. THat being said we are going to explore alternative exotics and another source of PH, but we gonna order small samples first ,because we dont wanna find ourself sitting on bunch of useless wood again .
Please be sure that if ever an exotic pops out ,you can be first on the list and have a pick, i am sorry that we have strained your nerves and patience to this extent but it is a bit the same to us . We are making progress in other departments like Quality Control Testing and did some other small revisions , hopefully it would translate in less warranty cases,so we are really working constatly on making things better .
Thank you very much for the kind words and patience !Have a nice day !”
My nerves aren’t strained, LOL. I’d love a TM2 to compliment my TM and have as a backup. We’ll see. It will take more time for another wood variation, if any at all. We’ll see. I’ll let the TM experts figure it all out. I’ll simply keep enjoying my OG TM - BEST. VAPE. EVER!
Dr. G
Vapman Collector*Vapman Beta Tester
Thanks for sharing this...also, I really like the burnt wood one they are selling on their website now...has anyone received one of these? I am curious to see more photos.I again reached out to TM asking if there was any updates on Purpleheart/RED for the TM2 and received the following reply (I also wrote them a couple of months ago without a reply and wasn’t concerned at all then):
“Sadly this purple heart production is not going well, wood just keeps changing dimensions and shrinks and we cannot get it into condition that will make a tight fit to the metal panels and not have lightleaks. We really hoped that artificial drying process will speed up things ,but i guess we just either got a material that was really moist or just purpleheart is not suitable for production of TM2. THat being said we are going to explore alternative exotics and another source of PH, but we gonna order small samples first ,because we dont wanna find ourself sitting on bunch of useless wood again .
Please be sure that if ever an exotic pops out ,you can be first on the list and have a pick, i am sorry that we have strained your nerves and patience to this extent but it is a bit the same to us . We are making progress in other departments like Quality Control Testing and did some other small revisions , hopefully it would translate in less warranty cases,so we are really working constatly on making things better .
Thank you very much for the kind words and patience !Have a nice day !”
My nerves aren’t strained, LOL. I’d love a TM2 to compliment my TM and have as a backup. We’ll see. It will take more time for another wood variation, if any at all. We’ll see. I’ll let the TM experts figure it all out. I’ll simply keep enjoying my OG TM - BEST. VAPE. EVER!
Cloud McLongFoot
Well-Known Member
Yes sadly the same issue here in Aus, international shipping always hurts
hoyo77
Well-Known Member
i like this company. https://vatra.com
Laantje
Well-Known Member
Hi y'all,
I received my Tinymight 2 yesterday and I'm having some problems.
A lot of times when I try to turn it on using the 3x click, it vibrates 4 times and then shows green -> red -> green and doesn't turn on.
Sometimes it does turn on correctly, and I am then able to use it without any problems until I turn it off again and leave it unused for a while. The problem described above keeps returning and I have no clue what is causing it.
Charging gives me a solid red light that always just disappears after a few minutes. I've used the device for around 5 or 6 sessions so it should not be full in just a few minutes.
Any ideas?
Maybe someone here had the same experience
I received my Tinymight 2 yesterday and I'm having some problems.
A lot of times when I try to turn it on using the 3x click, it vibrates 4 times and then shows green -> red -> green and doesn't turn on.
Sometimes it does turn on correctly, and I am then able to use it without any problems until I turn it off again and leave it unused for a while. The problem described above keeps returning and I have no clue what is causing it.
Charging gives me a solid red light that always just disappears after a few minutes. I've used the device for around 5 or 6 sessions so it should not be full in just a few minutes.
Any ideas?
Maybe someone here had the same experience
Is it possible that is it turned down below 3 when you try this?
Laantje
Well-Known Member
Nah since I've done some research before I got it, I put it on 6 immediately as I thought it would be the sweet spot for me.
EDIT: Also, when it works it works wonders. I've had some massive hits on dial 6
Its kind of hit or miss whenever I turn it on after not using it for a while. Yesterday before I went to bed it stopped working again and this morning it turned on without any problems.
I hope its just a failing battery.
I've ordered a few extra batteries and an external charger, I'll try the other batteries once I have them.
Last edited: