TinyMight / TM 2
- Thread starter kuzko
- Start date
viceroy420
Well-Known Member
i think someone got a reply on instagram saying as early as 3 weeks
Djsleepy
Well-Known Member
As of today I do not know soon as I find out I will let
U guys know!
Vaporific
All who wander are not lost...
(The RED one looks beautiful)Nice looking your very dark version.
(The RED one looks beautiful)
(The RED one looks beautiful)
Oops, I must be dreaming
games-loaves0t
Well-Known Member
Anyone know what type of wood the red one is?(The RED one looks beautiful)
(The RED one looks beautiful)
(The RED one looks beautiful)
Oops, I must be dreaming
Vaporific
All who wander are not lost...
No but stated above it’s natural and not stained. I’m getting a red one!
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
New wood looks amazing indeed ! I am diggin both the walnut and reddish one. The texture on all units looks also more polished and less grainy. Jelly at the early adopters/testers 
!
! I am diggin both the walnut and reddish one. The texture on all units looks also more polished and less grainy. Jelly at the early adopters/testers !
Djsleepy
Well-Known Member
Another improvement is the size of the temp dial numbers, now larger and easier to read. There is also a dot now on the temp dial so you know what setting you are at.
Last edited:
And I got everything and more done, lol.........took me about 3 seconds flat to know I don't like the changes on either of them, especially the FW8.
When your wrong, just admit it damnit, lol. The new red, with a titanium stem, the TM powder coating sanded off, and a darkening of the red over time will be joining me at some point in the future.....uh, yup!
But will not concede to battery cover or stir tool, no siree! 
noobvaperct
Well-Known Member
Can anyone recommend a stem that cools really well but also small enough to be on the go with? Also worth noting that I’m strictly a native user.
danjens
Well-Known Member
High artisan terp pill stems or Ed’s tnt wood stem filled with boro beads.
Both great cooling, wood obviously a bit more durable but also has a little more draw resistance than the high artisan.
I’m sure there are others back through the pages of this thread as well. Good luck in your hunt.
Vaporific
All who wander are not lost...
A few members on this thread are making titanium stems, some may be custom length too. Search the thread as these were fairly recent posts within the last month or two. I don’t have one though I might consider getting one about the same length as the short stock TM glass stem for my second TM when the TM2 is officially released. I too am a HUGE native user with all my vapes, TM included. I use rubber caps to protect my TM glass stems:
I can recommend a Ti stem I bought from dzoinp. It is great with cooling and also you can carry it with you no problem. Mine is 60mm.
Abele Rizieri Ferrari
Well-Known Member
Good Vibes Boro
noobvaperct
Well-Known Member
A few members on this thread are making titanium stems, some may be custom length too. Search the thread as these were fairly recent posts within the last month or two. I don’t have one though I might consider getting one about the same length as the short stock TM glass stem for my second TM when the TM2 is officially released. I too am a HUGE native user with all my vapes, TM included. I use rubber caps to protect my TM glass stems:
For all of these responses, I have a dumb question - but do we know if this will fit in the TM2 without issue?
Vaporific
All who wander are not lost...
All indications from the beta testers seem to infer the stem size will be the same in the TM2 as it is in the OG TM. I’m banking on it as I have extra stock stems now and don’t need additional glass ones. I’ll take a RED TM2 please (
) without any extras! A 3rd party titanium stem can’t be ruled out though I prefer glass at this point.
Abele Rizieri Ferrari
Well-Known Member
You think all three colors will be available right away?
@noobvaperct also check @RogueGuy affordable glass cooling stems for TM, seems like a good choice for on the go. As for compatibility of stem sizes, I believe it has come up here earlier and has been confirmed. Might have been in the video by George from Vapefiend? I'm not worried about that.
@noobvaperct also check @RogueGuy affordable glass cooling stems for TM, seems like a good choice for on the go. As for compatibility of stem sizes, I believe it has come up here earlier and has been confirmed. Might have been in the video by George from Vapefiend? I'm not worried about that.
You already have lots of great recommendations but the stem I use on the go now is from 508phineas on Instagram. I have heard he is not making more but he might still have some. The two that I have cool wonderfully, with no CU.
cliffhanger1
Well-Known Member
Which screen do you use without CU? Such a basket screen with an edge? I only ask because i always had problems with the thick red oring where the screen always got stuck. And a screen without a "border" doesn't hold up without anything behind it.
Yep. I use a dome screen with no rim. Like you said, the ones with a rim get caught on the o-ring and make a mess. I have a bunch from Amazon and Ed's TNT.
I don't have any problem with the screen slipping out. The Vlad stems have a dimple to hold it in place, but I find the screen tension is enough for me.
cliffhanger1
Well-Known Member
Thx. That is nice that the stems have a dimple to hold it in place.
In the past i had dome screens without rim and i had sometimes the weed in my mouth because there was not enough tension. That is not nice, weed in the mouth while vaping.
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
The TM2 will have the same finish,like the newer batches of the OGs.The maker has opted for a hard oil finish ,that gives a bit of matte look to the wood and it has been tested for wear and tear and appears to be holding very well ,compared to a more shiny finishes ,that start to show wear sooner in time. The reason the new batches look a bit smoother is due to the grain . Walnut has much smaller grain than oak and surfrace will be more even !