Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
See if they will let you exchange it? Duds
TinyMight / TM 2
- Thread starter kuzko
- Start date
See if they will let you exchange it? Duds
Momor
Well-Known Member
The link you posted doesn't work for me but if it's actually a proper TM2 knockoff, it would also be the first time I see one also
AssistedLiving
Well-Known Member
On ebay a guy was selling a tm2, using a photo with the same SN as the photos from POTV's webpage!
[link removed]
Modnote: Link to counterfeit item removed
[link removed]
Modnote: Link to counterfeit item removed
Last edited by a moderator:
staircase slight of hand
Well-Known Member
AssistedLiving
Well-Known Member
I didn't mean imply it was counterfeit, my assumption was he might not have an actual unit to sell since the photo showing the SN was recently posted on the POTV website. I have no doubt the SN is authentic, the ad may be a scam, especially with zero feedback : )
Last edited:
imor jones
Well-Known Member
I got my tm2 a few days ago. Had a tm2 before. Havent used it till now. But today is friday. So happy weedend
for All of you
Tinymight Company told me about the possibilty to upgrade to an tm2. They give you 150€ for the old one. Though i thought about upgrading.
But now i Sold in to a friend for 150 and bought a new one for 350.
The tm2 looks like a worth upgrade to me. Though still havent used it.
So happy weedend again
for All of you Tinymight Company told me about the possibilty to upgrade to an tm2. They give you 150€ for the old one. Though i thought about upgrading.
But now i Sold in to a friend for 150 and bought a new one for 350.
The tm2 looks like a worth upgrade to me. Though still havent used it.
So happy weedend again
This is the first time I have heard this. Did you reach out to them directly about this?
They have been reported. Thanks for tagging me. I alerted TM to this as well. If this is real it looks like they have already knocked off the TM2 like they did the original Chinamight.
imor jones
Well-Known Member
I had to send in another tm 1 because its not performing good anymore. (It belongs to a friend). They told me, that i could also upgrade it. I asked if i could upgrade my 3 years old tm1. They said of course ...
Dolpaca
Well-Known Member
Loving this mouthpiece from TRWW! I can finally use the stock stem.
Cheesequake
Free Men Don't Ask
Been using the TM2 pretty much exclusively since I received it. It's the best vaporizer I've ever used by a mile. But for some reason I can't figure out how to use it through water. When I use it native I get the biggest clouds you could ever want, when I hook it up to a waterpipe it leaves a lot to be desired. Not sure where I'm going wrong with it.
Nice MP, but where'd you get your screen from? Looks deeper than other screens.
Just a theory......
When using the CU natively, the draw restriction is very high, so the heated air passes through the herb slower, allowing more vapor to build. When using a wpa without a CU, there is very little draw restriction, so the heated air passes through the herb faster, so less vapor. You might need to slow down your draw speed.
Another reason could be air leak issues. You might want to try loosen or tighten the stem holder ring (gotta find the sweet spot).
Dolpaca
Well-Known Member
Correct! It's a bucket screen from TRWW. Definitely deeper than the standard TM screens. They don't move around at all either which is a problem I have with the regular TM screens
Dolpaca
Well-Known Member
If you're in the US, then https://vgoodiez.com/collections/tinymight-1 is the way to go in my opinion
I suppose you could also go with POTV too now.
As far as price is concerned. I don't see these going on sale anytime soon. The TM2 is in pretty high demand ATM. I could be wrong, there might be some 4/20 sales.
I think vapefiend might still be the cheapest for US customers. With the coupon "420", it comes out to $330 including shipping. Also they always ship to the US super fast.
FelixVonTrapp
Well-Known Member
Total shot in the dark, but any chance someone knows of a store in NYC that might sell a TM WPA? I’ve got a 14mm but going to friend’s place and concerned I’ll need an 18. Thanks
Nog
Member
If you can find a headshop that stocks Grav products you can grab a 16mm Octo-Taster with the silicone cap, that will fit in an 18mm piece. With a quick google search I found "HookahTown" in NYC has them in stock.
Got an extra stem holder o-ring? If so, you could put the extra o-ring around your short stem to seal an 18mm. Obviously not ideal, but might save you some hassle. I've never tried this, just relaying info I've seen posted here or Reddit.
FelixVonTrapp
Well-Known Member
Thank you both so much! This board and its members are great.
tokenknifeguy
Well-Known Member
It will be 3 years in May that I've had that p26. I wouldn't say dud.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Oh haha I thought we were talking about a brand new cell, if it is 3 years old then that would explain problems, they can get wonky
VapeForHealth
Active Member
Hi all,
I am looking at a few stems, beads, and a J Hook for the TinyMight2, and I have some questions.
#1 Are 3mm beads the optimum size for use in the TinyMight OEM 80mm stem? EDIT: Found out that 4mm & 6mm beads would be better.
vgoodiez.com
#2 Can the beads be used with the TinyMight OEM XL Cooling Stem?
vgoodiez.com
#3 How many packages would each stem require? EDIT: Several packages of larger sized 4mm & 6mm will be required.
vgoodiez.com
#4 Will this J Hook fit a TinyMight 18mm WPA? I think I have read somewhere that sometimes 18mm and 19mm are used interchangeably to describe the same size adapters/sockets, but I can't seem to find that information right now. Confirmed 18mm & 19mm are used interchangeably, but also that this J Hook is not recommended.
vgoodiez.com
#5 How would these stems with beads compare in cooling to the J Hook? J Hook has less cooling, but also less draw resistance.
#6 How does one ensure they do not suck the screen/glass beads into their mouth when inhaling? I have seen a picture of bead packed stems on VGoodiEZ, and they had screens on the top and bottom of the beads. The top screen appears like it could potentially be sucked into your mouth when inhaling.
#7 How do you keep the beads from falling out of the bottom of the stem? It seems like the weight of the beads could push out the bottom screen.
Thanks!
I am looking at a few stems, beads, and a J Hook for the TinyMight2, and I have some questions.
Quartz Stem for Tinymight by VGoodiEZ
55mm in length this is the same as the official Tinymight Short tube. 80mm in length this is the same as the official Tinymight Long tube. Works with the OG Tinymight and Tinymight 2! **Tinymight for demonstration purposes only. Not included in the sale.
#2 Can the beads be used with the TinyMight OEM XL Cooling Stem?
Tinymight XL Cooling Stem for Tinymight by VGoodiEZ
This XL stem provides a solution to use Tinymight when portability is not the main concern. The benefit of the extra long stem is that it has special features inside the glass to cool down vapor without using the cooling unit. And cleaning is very simple, you can just rinse it with a hot water...
3mm Borosilicate Beads - ~9g Bag by VGoodiEZ
These 3mm Borosilicate (Glass) beads / balls / spheres have a number of different purposes being used in both heat sink vaporizer tech as well as glass mouthpiece cooling tech. These are the same Glass beads used in Vape Critic's G43 vaporizer so they are a direct and suitable replacement...
Sherlock by Elev8 Glass (7th Floor)
14mm or 19mm Female Sherlock. Sometimes referred to as a J hook. The 14mm Variant works great with the Lotus!
#6 How does one ensure they do not suck the screen/glass beads into their mouth when inhaling? I have seen a picture of bead packed stems on VGoodiEZ, and they had screens on the top and bottom of the beads. The top screen appears like it could potentially be sucked into your mouth when inhaling.
#7 How do you keep the beads from falling out of the bottom of the stem? It seems like the weight of the beads could push out the bottom screen.
Thanks!
Last edited: