AssistedLiving
Well-Known Member
The OG TM doesn't have protection, if the battery was replaced upside down the device might require being returned to Finland, cheers!
TinyMight / TM 2
- Thread starter kuzko
- Start date
The OG TM doesn't have protection, if the battery was replaced upside down the device might require being returned to Finland, cheers!
Yup that's what I thought, I'll start an email with Tiny. Thanks.
Vaporific
All who wander are not lost...
The board is likely fried. I accidentally did that with my OG TM in the Fall - inserting the battery the wrong way and turning on the unit - and had to get the board replaced by TM. Good luck.
tokenknifeguy
Well-Known Member
Anyone having any problems with the Molicel battery? I got like 6 batteries I use for the TM and 1 is a Molicel, and it has been acting up lately. I got other batteries even older that doesn't act up like the Molicel. Like it will 'die' in the TM and still have like 2 or 3 vibrations left on the battery level. Usually I can take the cap off and put it back on and it will work. I know a few times I had to keep messing around with it to finally get it to work. Like just now, it has 2 vibrations left on the battery. Took like 3 or 4 tries to finally get it to work. So I'll put the battery in and cap on. It will vibrate 2 times for battery level. I'll then triple click it to turn on, then the TM will vibrate 2 times and then cut off. Finally on the 3rd or 4th try, it will do the 2 vibrations and then actually stay on. I'll still get about 4 or 5+ hits left with the battery. I've even checked the voltage when it does this and it isn't low on the battery, at least not the level that it would be at when it is dead.
Photonic
Lesser-Known Lurker
I only use Molicel P28A (three of them in rotation) in my TM2 with no issues at all.
tokenknifeguy
Well-Known Member
I got the p26. I got 2 more p26's that I use as a pair for my tetrax and box mods and haven't had a problem. Was thinking it might be a connection issue as it will eventually get right and work. But it could be just the battery not being up to par.
Momor
Well-Known Member
I had this kind of problem with my first TM few years ago and the problem was that the potentiometer leg broke (some part of the temp dial was broken). If you want to check if this is it, you would have to enter calibration mode and see if the LED color change when turning the temp dial iirc
Vaporific
All who wander are not lost...
Happy 3rd anniversary to my most wonderful, faithful, consistent, efficient, powerful, versatile, beautiful (sexy and easy on the eyes in a Steampunk way), enjoyable, easy to use, tasteful and favorite vape, my Tinymight! You rock me babe, every single time! You’re even in my pocket as I write this. We are attached by button (and hip) and the ongoing outcome for on-demand mode. Oh how I love thee. I look forward to at least as many more excellent years ahead with you fresh batteries notwithstanding. Cheers, and let the celebration continue! 
Last edited:
cx714
Unregulated Tendencies
Until you drop her for a younger prettier REDhead!
Cheebsy
Microbe minion
I've had a molicel do this at quite a young age too, the rest have been spot on though. It's just bad luck I think.
Made an alligator 
organization tray today.
Something a little different than the norm - love the way it came out!
organization tray today. Something a little different than the norm - love the way it came out!
tokenknifeguy
Well-Known Member
But if that were the case, wouldn't it happen to my other batteries I use for the TM and not just the Molicel? I have like 4 or 5 different types of 18650 brands that I use along with the molicel. I've only experienced this with the molicel. But I did wonder if my TM was messing up, as I did drop it a while back but it all seemed to work well and I haven't had any problems since.
People are always asking for 14mm WPAs on this thread. The Rogue Wax Works just dropped a whole bunch:
theroguewaxworks.com
Other cool stuff too, including the new Quartz Terpcicle.
Search: 31 results found for "Tinymight"
Hand crafted dab tools, Vapcaps, dabbers, vaporizer accessories, cannabis concentrate tools and cannabis accessories
Other cool stuff too, including the new Quartz Terpcicle.
Dolpaca
Well-Known Member
I've never been one to chase flavor but this HA stem really helps bring out the flavor in my herb. It just tastes so pure.
Momor
Well-Known Member
My reply was for TeaCup's problem.
In your case, as Cheebsy suggested, i think you where unlucky and got a bad Molicel (or a fake one ?)
Vaporific
All who wander are not lost...
As been stated herein many times, always buy 18650s and other vape batteries from reputable retailers. I’ve never had an issue with any 18650 I’ve purchased from a couple of main merchants here in the US. 18650batterystore is one.
tokenknifeguy
Well-Known Member
The molicel in question was bought from a reputable vendor.As been stated herein many times, always buy 18650s and other vape batteries from reputable retailers. I’ve never had an issue with any 18650 I’ve purchased from a couple of main merchants here in the US. 18650batterystore is one.
badbee
Well-Known Member
I think this one slipped past people. For the record, I absolutely love that. I don't usually buy stuff like this, but this one I would pay money for. Really well done.Made an alligator
Something a little different than the norm - love the way it came out!
AssistedLiving
Well-Known Member
did anyone else notice that the TM2 is being sold by POTV?
www.planetofthevapes.com
TinyMight 2 Vaporizer
Free Grinder with the Tinymight 2 Vaporizer during our Black Friday Sale! Experience powerful vapor quality with fast shipping and a 100% Satisfaction Guarantee.
Dolpaca
Well-Known Member
That is awesome! The more readily available the better.
Though I find it a bit odd that some of their pictures have the old style battery cover on them.
did anyone else notice that the TM2 is being sold by POTV?
TinyMight 2 Vaporizer
Free Grinder with the Tinymight 2 Vaporizer during our Black Friday Sale! Experience powerful vapor quality with fast shipping and a 100% Satisfaction Guarantee.
Though I find it a bit odd that some of their pictures have the old style battery cover on them.
I was going for something subtle, might have gone a little to subtle
One thought I had was to stain the gator, it would definitely pop. But then I went back and forth, I equally like that it’s all 1 piece one colour.
Anyways, I had a blast making it so really that’s the big win. I have a large… large scrap pile of, “didn’t quite make it” projects, so when one does make it to the finish line, it’s very rewarding!
Please feel free to DM me here or on Insta.
[link removed]
First time seeing TM2 knockoffs hit the market.
Anyone brave enough to buy and disassemble
?!?
Modnote: Link to counterfeit item removed
First time seeing TM2 knockoffs hit the market.
Anyone brave enough to buy and disassemble
?!?Modnote: Link to counterfeit item removed
Last edited by a moderator:
onesixty2
Well-Known Member
fakes have been all over dhgate / alliexpress for a very long time now. There's been several breakdowns of the internals, and a couple threads or posts made about them every so often: https://fuckcombustion.com/threads/fake-tinymight-vapes.52604/
tl;dr, no, don't anyone be tempted to buy it, it's bad build quality and unsafe
tl;dr, no, don't anyone be tempted to buy it, it's bad build quality and unsafe
Vaporific
All who wander are not lost...
Search for “Chinamight” in this thread. It’s been discussed before. Not good by any stretch. Only buy from TM or approved resellers.
TM 2 versions?
I’ve seen the TM1 all over, this was the first I’d seen the TM2 knock off for sale.
But then again I haven’t been looking specifically, just stumbled upon.