TinyMight / TM 2
- Thread starter kuzko
- Start date
FelixVonTrapp
Well-Known Member
Blinking means itās on and ready to go. When you want to take a hit, click and hold button. When it buzzes youāre ready for a nice slow draw.Can someone help a total newb out? So it's all cleaned and packed, what do I do next? I ask as I turned it on on demand mode (3 clicks) but it seems to just keep blinking green, is this right? I got scared and switched it off
Md_Hybrid
Stuck under a šŖµ
I figured that was probably it, thanks for the assistance
Edit: just took my first hit @ 5.5, I'm in love already
Edit 2: 2nd hit OMG
Edit 3: 3rd hit in and just wanted to say believe the hype, it's really that good!
Edit 4: couldn't be happier! If someone isn't happy with the performance then they either have a defective unit or clearly they are defective themselves
Here's the first of what will be many stem packs, this was actually done closer to 5 than 5.5 btw
That's it for now, off to do some yardwork!
Last edited:
RustyOldNail
SEARCH for the treasure...
This video link was posted earlier in this thread. Just a reminder, the āexpertā that made the video, never mentions the oring (clear on mine) that sits on top of the inner glass tube, under the top cover. And the heater screen comes with the WIDE edge UP, as the Tinymight maker also has confirmed, thatās how I use my TM OG.
RustyOldNail
SEARCH for the treasure...
I don't have glass in my TM it seems!
Itās hard to see as itās very clean and clear. My friends came with the top clear glass tube ābrokenā. I removed the removable metal tube to clean it, thatās when I noticed the broken glass. The heater is coiled inside the bottom glass tube, and when I turned the TM upside down, the coil slipped out, so I was unable to replace the top glass tube. Once that happened, it was beyond my ability, and since it was brand new, I returned it for repair, got it back a week later.
holy shit!
My TM has its old power again, thank you a lot . Now I even need to calibrate it down again.
Havnt used that unit 3 month already, I thought it was broken.
Now it will be in rotation with my tetra p80 !
Love both vapes equal again! ;D
Vaporific
All who wander are not lost...
Iāve never calibrated my OG TM. If the power is diminished I just loosen the screw slightly and re-tighten it and power is restored. I have taken my TM apart several times for various reasons and shimmed the contact under the top plate ages ago; I havenāt disassembled it since last year when I sanded the body down and gave it a good beeswax application.
And yes, itās mostly love at first vape with the TM - most enjoy it right out of the gate. I fondly recall my first time with mine. Itās an amazing vape, versatile, powerful, and all that great stuff. Most truly enjoy it. TM2 seems even better!
jamesuk9
Crew Slut...
i've held off making comparisons for the first few days as I wanted to be confident and certain in my comments. TM2 appears to be be everything the OG TM should have been IMHO.Iāve never calibrated my OG TM. If the power is diminished I just loosen the screw slightly and re-tighten it and power is restored. I have taken my TM apart several times for various reasons and shimmed the contact under the top plate ages ago; I havenāt disassembled it since last year when I sanded the body down and gave it a good beeswax application.
And yes, itās mostly love at first vape with the TM - most enjoy it right out of the gate. I fondly recall my first time with mine. Itās an amazing vape, versatile, powerful, and all that great stuff. Most truly enjoy it. TM2 seems even better!
I love the USB-C charging as I am forgetful with charging so when I go to use it and its flat, by the time I've put the kettle on and made a coffee there is ample charge to rinse a bowl without it dying again.
Also, I am really impressed with low temp use, it performs really well and can extract everything between level 3 and finish off on 5.
The wood is much nicer and seems more resilient too.
Also, nothing rattles when you shake it! No button rattle at all.
As a veteran who has tried pretty much all major portables over the past 7 years, I can't think of anything that comes close and that must worry folks like Storz & Bickel as it's going to take something mega to slow down the Tinymight steamroller.
League of it's own for portables and it's not even close.
Only argument for others is idiot proof design that you can hand to friends.
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
Yes that is what cruise mod is for at least for me. Just hand it to them and they just take a toke,no button pressing ,no overheating of the bowl while not inhaling...
jamesuk9
Crew Slut...
Yes, LED light on top and bottom that changes colour to alert you to battery level. Also it still has the buzzing between 1 and 4 when you turn it on.
I hear this regularly about the TM and I can't understand it. Is it draw speed? Holding a button while inhaling? What are people getting wrong? The TM might be the simplest vape that I own to operate and that includes the mass-market portables.
jamesuk9
Crew Slut...
it's intuitive for a regular vaper. The problem arises when you hand it to somebody who has never vaped. Session mode is perfect for these scenarios as all they have to do is put it in their gob and inhale.
GoldenBud
Well-Known Member
maybe people get too high and don't have the power to take the stem out of the unit?!
But this is the part I don't understand. Do people not know how to breathe?
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
The idea of passing it around in session mode stresses me out haha, because people wouldn't be able to clear their hits with the power constantly flowing to the heater... Almost as bad as using an all-out session vape, with people standing there talking, wasting the vapor instead of hitting it lol
Okay, just had to point out, this is exactly why the solution to a TM that is suddenly feeling less powerful, is absolutely not to recalibrate it, you see how you kept recalibrating it higher and higher over time, because you weren't solving the problem
Okay, just had to point out, this is exactly why the solution to a TM that is suddenly feeling less powerful, is absolutely not to recalibrate it, you see how you kept recalibrating it higher and higher over time, because you weren't solving the problem
noobvaperct
Well-Known Member
On-demand 4 lyfe.The idea of passing it around in session mode stresses me out haha, because people wouldn't be able to clear their hits with the power constantly flowing to the heater... Almost as bad as using an all-out session vape, with people standing there talking, wasting the vapor instead of hitting it lol
Okay, just had to point out, this is exactly why the solution to a TM that is suddenly feeling less powerful, is absolutely not to recalibrate it, you see how you kept recalibrating it higher and higher over time, because you weren't solving the problem
Yeah I'm basically grasping at straws.
RustyOldNail
SEARCH for the treasure...
Personally, I wonāt be āsharingā anything my mouth comes in contact with anyone else. I did in the pastā¦.
When I have a guest or two, Iām able to offer them a separate device, which I clean later.
On the subject of use, or more specifically ādrawā, I try to explain to a newbie the differences between a conduction and convection device beforehand. While itās easier for most to draw slowly on my more ārestrictiveā devices, like Mighty and IQ2, draw control on a convection device like the TM, Roffu, etc., is in my opinion, a bit more involved. The user becomes more involved with controlling the heat level and resulting output depending on draw strength and draw time. After two years Iām still experimenting, the other variables like strain, moisture, packing, amount, etc., also come into play. But most of you know this alreadyā¦.
When I have a guest or two, Iām able to offer them a separate device, which I clean later.
On the subject of use, or more specifically ādrawā, I try to explain to a newbie the differences between a conduction and convection device beforehand. While itās easier for most to draw slowly on my more ārestrictiveā devices, like Mighty and IQ2, draw control on a convection device like the TM, Roffu, etc., is in my opinion, a bit more involved. The user becomes more involved with controlling the heat level and resulting output depending on draw strength and draw time. After two years Iām still experimenting, the other variables like strain, moisture, packing, amount, etc., also come into play. But most of you know this alreadyā¦.
JonServo
Well-Known Member
Completely agree it is very simple, but I've found the TM to perform differently depending on grind and how you pack the stem. But after a few tips given to friends, they're off and running!
FelixVonTrapp
Well-Known Member
Functional, yes. That said, I personally find the glass at lips to get pretty hot. Mind you, Iāve been using the bubbler as daily driver, so Iām spoiled by the cool glass. In other words, YMMV.
Personally, Iām going to order a walnut mouthpiece when he has them back in stock to make it comfortable vapor and glass heat.
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
There is a workaround for that too, I call it vaporboarding
...You basicly suffocate people with one hand and when they are at death's door you release the choke and stick the stem in their mouth ,being their only option to breath through.
....This is so going to end in the out of context thread.
Protip :
Last edited:
Is a wooden MP not unhygienic? Not like you can clean it with an alcohol wipe. Just seems like it will get nasty.