Abele Rizieri Ferrari
Well-Known Member
He also makes them with stainless lining I believe.
TinyMight / TM 2
- Thread starter kuzko
- Start date
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
It can be used while it is charging ,but the the cable cannot feed the the heater directly,just not enough amps.Excuse a silly question from a newbie TM2 fan, but does the TM2 have pass through when charging?
FelixVonTrapp
Well-Known Member
Excuse a silly question from a newbie TM2 fan, but does the TM2 have pass through when charging?
Fair point. I had assumed that you could in fact use an alcohol wipe…that the wood would be treated so as to permit it. Otherwise I guess I should get a ditanium
Edit: I asked high artisan and of course I shouldn’t use alcohol on the wood
“You can wipe out the exterior with a damp paper towel, slightly soapy if needed.”
Like from you mouth? I mean wooden pipes and stems don't bother me. I even have used wood bowls and utensils.
BleuEyedGuy
Active Member
doesn't the wood also hold some of the smell, I like the fact that I can clean my glass stems with a short iso soak
Michel
Well-Known Member
TM2 joined the family last weekend…
Edit: The OG TM in the middle was my backup and is roughly 1 month old. It has same build quality than TM2. Apart the wooden walnut body, obviously.
The unit on the right has a beautiful aged body. Even if the build quality is the lowest, I prefer it’s aged appearance.
Does anybody else find the TM2 does perform differently because of the bigger distance between chamber and coil? It seems somehow there’s more convection heating now.
Edit: The OG TM in the middle was my backup and is roughly 1 month old. It has same build quality than TM2. Apart the wooden walnut body, obviously.
The unit on the right has a beautiful aged body. Even if the build quality is the lowest, I prefer it’s aged appearance.
Does anybody else find the TM2 does perform differently because of the bigger distance between chamber and coil? It seems somehow there’s more convection heating now.
Last edited:
noobvaperct
Well-Known Member
I'm waiting for a new drop of 4 terp pill stems myself and wanted to also get a walnut mouthpiece - but if this is the case and they might hold bacteria/can't fully clean it like you can with glass - I might have to pass on the MP and just get the stem which should more than suffice by itself.
Shorner
Well-Known Member
I have just ordered a terp pill stem from High Artisan, didn't bother with the mouthpiece i don't like the look of it. I will just use the stem with basket screen.
BleuEyedGuy
Active Member
I have been using some inexpensive 100mm 16mm OD, slightly thicker-walled, glass tubes, without the cooling units, and haven't felt the need to try anything else. I did however try the, 2/$10 shipped 3" GRAV octo-taster, and the OG TM 55mm, didn't like either. Ville threw in some extras when I ordered last year, a couple cooling stems, wpa's, and the bubbler, that I never used, will offer all as a package when I order a TM2.
GiuseppeRoots
New Member
Depends on the wood.
Not every wood is useable for every purpose, but oiled/waxed/closed surfaces can reflect a lot of dirt/smell.
Tropical woods tend to be better and not "dry out" so fast, or more retain the oil a fair amount of time.
Cleaning is necessary anyway. Just dry wipe it or use a dab of acetone.
Not every wood is useable for every purpose, but oiled/waxed/closed surfaces can reflect a lot of dirt/smell.
Tropical woods tend to be better and not "dry out" so fast, or more retain the oil a fair amount of time.
Cleaning is necessary anyway. Just dry wipe it or use a dab of acetone.
noobvaperct
Well-Known Member
By the way, are basket screens 100% required to be used with a terp pill stem? Can't just load herb in at the base of the stem?
FelixVonTrapp
Well-Known Member
I’d say the opening might be a little large for that. Maybe if you put in a nug?
Shorner
Well-Known Member
Definitely need basket screens
Elfstone
Mew
First time using the TinyMight 2. Mine just went blue, does that indicate that I have 2/3 of battery life left? If so, how does,it affect the performance? And when is the best time to charge? Green, Blue, purple or can it still be used down to red? Also, I concur, I also have been using it 5.5 and for now I’m quite satisfied at this temp.I've vaped 4 stems now and honestly haven't felt the need to turn it up at all
I'm getting amazing flavor and huge dense clouds like this, not to mention that my battery level just went down to blue during my 4th pack.
Yes sir, I need some basket screen too. Best place to purchase in the USA?
jamesuk9
Crew Slut...
That's where i am at. I start at 4 and finish on 5.5/6. I have no urge to go higher I think this is the sweetspot.I've vaped 4 stems now and honestly haven't felt the need to turn it up at all
I'm getting amazing flavor and huge dense clouds like this, not to mention that my battery level just went down to blue during my 4th pack.
noobvaperct
Well-Known Member
Any place you’d recommend that work really well and I can buy a pack? Can I use the small one that came with the TM2 until I buy more?
jamesuk9
Crew Slut...
battery discharge shouldn't really affect performance as it's a regulated device. When there is not enough power to heat at the temp you have set it will auto shutdown anyway.
That’s what the new Ti stem is for
FelixVonTrapp
Well-Known Member
pretty sure the TM2 accessories pack has a basket screen in there, too.
Which setup with a basket screen do you like more, and why? I've seen both setups on here.
onesixty2
Well-Known Member
I do setup 1 for my Grav 3” Taster (because the hole is too wide even for medium grind flower) and plan to do the same for my tnt wood stem when it arrives. I haven’t noticed flower falling into the bucket like this, so I see no reason to do method 2 which would require more messing with it while packing a bowl. I just scoop, tamp, and go.
Edit: I also don’t put a basket under the CU, though, so strictly speaking I haven’t done either exactly as drawn. The screen on the bottom of the CU is enough for me when I used the glass / ti stem, but those are already my least used.
Edit: I also don’t put a basket under the CU, though, so strictly speaking I haven’t done either exactly as drawn. The screen on the bottom of the CU is enough for me when I used the glass / ti stem, but those are already my least used.
Last edited:
Md_Hybrid
Stuck under a 🪵
This is also my first time with one so I'm not really sure if there is a best time to charge it or anything. I'm down to purple now though & can confirm that it's still pumping out clouds.
Elfstone
Mew
I asked this because when and turn on TM2 it vibrated. I noticed that it was taking a long time to vibrate and heat up. When I place the battery in the charger, there were only two bars and blinking on the third bar. The battery is the one that came with the TM and I fully charged it with an external charger before I use it.