Discontinued The Persei Vaporizer for herbs and concentrates.

kindbeats

Terps Up, Temps Down
w9tech.com is showing Silver Persei for $119.99 and the rest of the colors for $159 !!!! This is an awesome sale (or website coding error) and time to pull the trigger if you were on the fence.

:clap:

HTyLkEq.png

I'm pretty sure the chrome are cheaper because they're being phased out. Could be mistaken though.
 
kindbeats,
  • Like
Reactions: ataxian

masaki

Well-Known Member
Can someone upload a video of the hercules doing herbs I really wanna see this thing in action. I know its a beast with concentrates!
 
masaki,

Rhino420

Member
ok huys i'm thinking of loading up some hash in the herc (white rod)... the consistency of the hash is soft kind of like play dough but a lil chunkier... also I have some wax I can mix it with if I need to.

anyone have any tip on how to load it up? should I take the coil out? I have a coil that sits a lil about 1 or 2 centimeters below the rod...

thank you to anyone that can help...

-ryan
 
Rhino420,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
For hash I have seen a few people get good results with 20% as so they have the hash sitting right on top of the rod. If it's a super melt use a 30 or 40 coils.
 
THC SCIENTIFIC,
  • Like
Reactions: ataxian

itschad

Well-Known Member
i think one of my buddies completely fubar'd another friends 2.4 cart, literally no unit we put it in will turn on/get warm/light up/do anything when its attached to it. i was quite surprised when he actually brought it over and i tried it in my persei and ss

guess we'll just melt it all out and load a new cart :X
 
itschad,

Rhino420

Member
For hash I have seen a few people get good results with 20% as so they have the hash sitting right on top of the rod. If it's a super melt use a 30 or 40 coils.

@THC SCIENTIFIC, just so i'm clear. with the 20%, you mean 20% coil, then do I pack the hash down around the rod or just put in herc pack down till hash is on top of the rod, then put top cap, and mouth piece and hit like normal? kind of letting the hash melt down onto the 20% coil while i'm hitting it?

also on a side note will the hash leave a lot of residue in it, say if I vape a gram through it? I know I can just clean it real quick, but just wondering if I could just switch it back up to wax before I boiled and iso'd...

thanks a lot for the quick response G.

-ryan
 
Rhino420,

masaki

Well-Known Member
Thanks for all the help guys!

I am considering the bender for sure but I wanted to water condition my vaped herb with the nibbler xl can the bender do something like this?
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
ok here is the issue with water extracts.

The Herc SR 71 is designed to do all extracts. All of them simple as that. Now what you have to understand if the water extract is not fully 100% super high quality full melt that leaves no residue behind then your gonna have to clean it after use, because The taste might suffer just a tad bit not like it would if it was lets say a wire heater. Once the vaporizeable content is gone its gonna leave back the impurities that will combust if to hot. You will notice this when you start tasting burnt.


Now here is what i would do when doing water extracts.

Load the coil, load the extract on top of it, use it, let it melt while your using it. Once you start tasting the burnt residue time to give it a good cleaning.

What some customers are doing is because of the Hercs Capabilities is they buy two so as to keep the pure stuff from touching the one thats getting cleaned out alot. Meaning they have a herc running the good stuff, while they have a herc running the crap that wont pass the food and drug administration in a third world country.
 
Last edited:

Rhino420

Member
cool G, thanks again for the heads up!

while they have a herc running the crap that wont pass the food administration in a third world country.

i'm pretty medicated right now, and that had me rollin. thanks
 
Rhino420,

PhotoRider

Diagnosed with level 11 G.A.S.
w9tech.com is showing Silver Persei for $119.99 and the rest of the colors for $159 !!!! This is an awesome sale (or website coding error) and time to pull the trigger if you were on the fence.

:clap:

HTyLkEq.png
Yes, They reconfigured it to just the single top and the base/chargee. No carts etc. Allows people to grab just what they want now. The Persei base, then the carts...
 
PhotoRider,
  • Like
Reactions: ataxian

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Yes, They reconfigured it to just the single top and the base/chargee. No carts etc. Allows people to grab just what they want now. The Persei base, then the carts...

Yup. We are lowering prices and repackaging them. After this stock runs out we will repackage them and i think Persei's start at $159 now.

So if you still want the double top you have to order from places like planetvape, or vapornation
 

PhotoRider

Diagnosed with level 11 G.A.S.
Of course my Nibbler XL arrives on the only day I've ever been out of oil. :doh: It looks beautiful though! Have to try and rectify this situation pronto.
What, you must live in a different time zone, still waiting for my friend from USPS and I got wax. about 30g's waiting...
 
PhotoRider,
  • Like
Reactions: ataxian

Atomsk

Floating In My Tin Can
I had terrible luck with fashioning an herb chamber I posted about last week. A few cuts and a burn and I decided that I'm better as an idea guy. So now the only other idea I have would be something like the Solo's glass stems, or a glass platform with small holes that acts as a median between herb and the herc rod, kind of like a big glass screen.

Also, as a replacement to the coils: can anyone see why a porous ceramic like what's used in the Vapor Genie, or the Healthstone products, wouldn't work in a Hercules? Shaped just like the coils now, but made of ceramic with the porous texture of volcanic rock.

Finally, had a bunch of reclaim in my oil dish that tasted pretty burned and terrible. So after loading this in to the 40 coil I've been using, I added a little less than 4 drops of e-cig liquid flavoring, sans nicotine. It isn't deeply flavored like an e-cig but it does do a great job of masking the off-taste of the overheated reclaim. I imagine the liquid / vg is changing the viscosity of the oil (if they are mixing well). So if you have a bad flavor profile and you have some VG, put a couple drops.
 

masaki

Well-Known Member
Hey guys I think I might pull the trigger on the herc sr71
What voltage should I get if I want the best of both worlds?
I'm gonna be using it for mostly herbs and occasionally with oils

I want the bender but I want to water condition my vapor
 
masaki,

Caligula

Maximus
Hey guys I think I might pull the trigger on the herc sr71
What voltage should I get if I want the best of both worlds?
I'm gonna be using it for mostly herbs and occasionally with oils

I want the bender but I want to water condition my vapor

Get the 7.4v (white rod) version now... or wait a few weeks for the black rod, which is probably right up your alley. Can always get the 7.4 white now and buy a black rod later. OT is that your Subaru?

Edit: you can route the bender through a water piece to h20 condition it.
 
Top Bottom