The Mighty/Mighty+ by Storz & Bickel

badbee

badbee

Well-Known Member
Mac09 said:
So I have these nugs that are coated in distillate and then rolled in kief.
Click to expand...
Shave some off with a razor blade\exacto knife and mix half and half with regular flower, see how it goes. If you want to use more increase the ratio of moon rock to flower until the bowl starts to be left too dirty, stop there before you get to the point where it will drip into the heater. That's the cautious approach...
 
C

canadianvapelife

Well-Known Member
badbee said:
Shave some off with a razor blade\exacto knife and mix half and half with regular flower, see how it goes. If you want to use more increase the ratio of moon rock to flower until the bowl starts to be left too dirty, stop there before you get to the point where it will drip into the heater. That's the cautious approach...
Click to expand...
Great advice, thanks!
 
canadianvapelife,
  • Like
Reactions: BigJr48
Petetbay

Petetbay

Well-Known Member
Mac09 said:
So I have these nugs that are coated in distillate and then rolled in kief. They don't grind the nicest and you lose a bunch of the kief. Since I basically only use vapes now I don't really have a way to consume them until the whole putting nugs in the mighty thing came up. I'm worried the distillate may drip off and potentially ruin the vape though. Would anyone have some insight into this?
Click to expand...
I would sandwich it between layers of regular herb, keeps screens like normal herb bowl, maybe stains bowl if really thick vapor. You want iso wipe to keep up with the staining, if leave it too long it bakes on the bowl and is a bitch to get off. But you probably already know that.
 
vapviking

vapviking

Old & In the Way
Mac09 said:
So I have these nugs that are coated in distillate and then rolled in kief. They don't grind the nicest and you lose a bunch of the kief. Since I basically only use vapes now I don't really have a way to consume them until the whole putting nugs in the mighty thing came up. I'm worried the distillate may drip off and potentially ruin the vape though. Would anyone have some insight into this?
Click to expand...
Maybe break or cut a piece off and wrap it entirely in some cotton ball (here's where I'm supposed to say "Organic, 100% cotton!). High heat.
Sandwiching between flower layers is fine, too.
Don't try to cram a big amount in each load.
And yes, an iso cleaning while still warm will probably be well worth the effort.
 
C

crownroyaldaddy

Well-Known Member
Mac09 said:
So I have these nugs that are coated in distillate and then rolled in kief. They don't grind the nicest and you lose a bunch of the kief. Since I basically only use vapes now I don't really have a way to consume them until the whole putting nugs in the mighty thing came up. I'm worried the distillate may drip off and potentially ruin the vape though. Would anyone have some insight into this?
Click to expand...
I vaped moonrocks in my OG Mighty

i placed a metal pad (cant think of the name…too high) under the moonrock just to protect the insides of the mighty from anything that might melt.
Id recommend crumbling some off, putting on a pad, and get stoned. As noted by the others, I’d use high heat. Like 390+ from the beginning.A little bit of moonrock goes a long way

you may need extra oven cleaanup after, depends on the moonrock

also, i will try a nug and report back.
 
Last edited:
Some-new-user

Some-new-user

Well-Known Member
StopMakingSense said:
I know in the thread I heard someone say passthrough charging didn't work. I just completely drained my Mighty+ of battery.

Tossed a capsule in, tried to turn it on, flashes no power. I plugged it into my 45W Samsung charger. The screen flashes, shows DCT, then I was able to turn it on and do a whole session.

It definitely switches from charging the battery to powering the Mighty + right away. Once I finished and turned it off it went right back to charging.
Click to expand...
Confirming this too - also getting the DCT message when plugging in a USB-C to USB-C cable in to a 45W source. Press the power button DCT seems to come on again confirming passthrough.

S&B state that passthrough with the Mighty+ requires 15 Volt @ 3 Amps 45 Watts (15x3=45). This is only cabable with USB C to USB C cables and specific power sources capable of Power Delivery (PD) this is the technology that will be in the supercharger.

For those of you familiar with ED'S TNT this this is what he is utilising for the portable woodscents adaptor. The specifics, I believe were set out around 2017/8 and have been revised this year to allow even more power (up to 240W) https://www.usb.org/usb-charger-pd - this isn't far off being able to power a volcano hybrid from a USB-C cable and would power a Plenty as it is. I can see this being quite interesting in terms of how home electronics will adapt.

Still happy, lost count of how many capsule's I've been through with it now :rofl:
 
C

crownroyaldaddy

Well-Known Member
Had two sessions this evening vaping nugs - wow! I will be doing this more often!

-It is nice and easy
-taste is better and lasts longer (I also started at 355 as opposed to my normal 365)
-my nug was baked all the way through after my normal temp step up to 410
-effects are equal if not better

satisfied, thanks for the tip
 
MGG

MGG

Well-Known Member
Mac09 said:
So I have these nugs that are coated in distillate and then rolled in kief. They don't grind the nicest and you lose a bunch of the kief. Since I basically only use vapes now I don't really have a way to consume them until the whole putting nugs in the mighty thing came up. I'm worried the distillate may drip off and potentially ruin the vape though. Would anyone have some insight into this?
Click to expand...
Imo this is risky. Though you could always invert the vape upside down so there's only risk of it dripping into the cooling unit, rather than the heater itself. Though the vapor itself could rise into the heater

crownroyaldaddy said:
Had two sessions this evening vaping nugs - wow! I will be doing this more often!

-It is nice and easy
-taste is better and lasts longer (I also started at 355 as opposed to my normal 365)
-my nug was baked all the way through after my normal temp step up to 410
-effects are equal if not better

satisfied, thanks for the tip
Click to expand...

:D welcome to the #nogrindgang

:D #wholenug. :p lol

The nug life didn't choose me, I chose- sorry I'll stfu.
 
C

crownroyaldaddy

Well-Known Member
MGG said:
Imo this is risky. Though you could always invert the vape upside down so there's only risk of it dripping into the cooling unit, rather than the heater itself. Though the vapor itself could rise into the heater



:D welcome to the #nogrindgang

:D #wholenug. :p lol

The nug life didn't choose me, I chose- sorry I'll stfu.
Click to expand...
I think another benefit is that your Mighty will stay cleaner for longer. Less small particles getting through the screen

i have been using my newvape fine grinder with the mighty for years so this is a big change
 
V

vapeape77

Well-Known Member
🤩 man I was on cloud 9 all day with the nug method. Using dense nugs in both Mighty OG and HR Edge, rippers with taste and I just kept going back for more lol

On oil use, I only use oil mixed with flower in my vapcap or brick jr, too much of a mess for electronics imo. Lately mostly only using “terp isolate” cbd since it doesn’t leave such a mess in the brick or cap.

ps: lol I did blow dry OG on cool setting and use a stick to remove that crap deep in on the fins, cleaned it pretty well at the lower fin area vapvikin pointed out.
 
Last edited:
simplywonderful

simplywonderful

Well-Known Member
vapeape77 said:
🤩 man I was on cloud 9 all day with the nug method. Using dense nugs in both Mighty OG and HR Edge, rippers with taste and I just kept going back for more lol

On oil use, I only use oil mixed with flower in my vapcap or brick jr, too much of a mess for electronics imo. Lately mostly only using “terp isolate” cbd since it doesn’t leave such a mess in the brick or cap.

ps: lol I did blow dry OG on cool setting and use a stick to remove that crap deep in on the fins, cleaned it pretty well at the lower fin area vapvikin pointed out.
Click to expand...
so you just pick out densest nug and just squeezed the shit out of it to the bowl? O.G all the way, I have done this couple time and it works. I remember seeing overly dry stuff that you could turn into powder with your fingers within seconds.
Btw thats cool that deep cleanse should be mandatory, If someone has O.G mighty and gets +, It cant compare unless the device is new or barely used or cleaned pretty well, same goes for the lower screen.
I found a charcoal in my air intake :o likely from oil
 
tdriver

tdriver

Well-Known Member
Been Vapin said:
after 12 days of heavy use finally had to clean the cooling chamber, started to feel some resistance. I forgot what a pain In the ass it is to get the coolimg unit spotless clean. So many Nooks and cranny. There was a lot of stuff in there lol

https://imgur.com/a/e28i5zS
Click to expand...


a cheap ultrasonic cleaner does magic......... in 5 minutes........ even without dismantling the cooling unit. (if you don't care about reclaim)
 
V

vapeape77

Well-Known Member
TheThriftDrifter said:
Whole nugz all day here, in the mighty or vapcap. Especially in the dynavap whole nugz = less scooby snacks.
Click to expand...
I’ve got to get that dyna out tomorrow morning it sounds!

I was trying whole nugs in caps with my Mighty OG and Crafty++ today, seemed mixed results compared to full bowl. I didn’t use any top lids on the caps, who knows….
 
MGG

MGG

Well-Known Member
MIGHTY+ WARNING
(THIS IS A DIRECT COMPARISON OF MIGHTY+ VS MIGHTY)

+ Mighty+ adds Ceramic coated filling chamber advertising "Is even more durable against scratches and damages"
- Within days there's been multiple reports sent to me about people significantly scratching their bowls on first use. It appears the ceramic is not compatible with stainless steel hash mesh or dosing capsule without risking scratching. This ceramic is less durable than the previous aluminium.

- Mighty+ lowered the vibration power of original.

- You're paying more for less. Mighty+ comes with less in the box than the original Mighty which came with grinder, filling tool, stainless steel mesh, and more.

+ USB C Charging
- Doesn't come with a charging brick like an original mighty, if you want pass through charging you NEED to get a special 45w+ charger. This is not standard so if you bring it to a friends he may have a usb-c charger but it won't be able to power the unit enough to do passthrough.

+ Mighty added the feature to 'stand'
- Mighty can't actually stand, it needs to use the pick to hold itself up. In a side by side by Troy on youtube, the original mighty actually stood up better than the new mighty.
- These new designs mean that the Mighty+ is no longer compatible with stand options on the market.

- Thinner metal
- This results in the mighty cooling down much faster than original mighty, you can actually overpower the heater if you hit too hard. Troy does a back to back comparison where he shows that the Mighty+ drops temp faster than original Mighty.

+ Improved airflow - though minor
+ Potentially improved taste though in testing it's been mostly indiscernible. (needs more testing, possible that conduction would test better with ceramic)
+ Improved screen (screen is significantly brighter than original, Mighty claims it is also more durable but time will tell, original Mighty screens would deteriorate over time especially if exposed to direct light.
+ Mighty will overshoot to 420f sometimes in heatup, so technically can get briefly hotter than original mighty.
+ Mighty+ appears to produce comparable if not slightly bigger clouds side by side to Mighty
 
You must log in or register to reply here.
Top Bottom