The Mighty/Mighty+ by Storz & Bickel

[latulipe999]

Exactly! well said, last time I checked it out there were 4000w carcinogens and harmful chemicals in each cig, latulipe999 when you compare your mighty to an M what would win? did you or anybody tried both milaana and mighty?

I do not think there is a winner, they are two exceptional tools that I use differently.

I like longer session with the Mighty. I start at prety low temp ( 175°C/345°F ) and I increase little by little when the auto-shut begin to buzz until there is no more vapor from the weed (200°C/390°F). I can spend 10 minutes on one bowl.

The vapcap is a quick and efficient way to extract a smalest amount of green ( compared with the Mighty ). I beleve it "click" around 210°C/410°F. It take me 1 or 2 minutes to spend 3/4 heat cycle if i'm in a hurry

I would like to test the Milanaa

 

[wilky]

the mighty is a great vape but its so ugly,

 

[simplywonderful]

the mighty is a great vape but its so ugly,

Maybe if you spend more time looking at it, it might start to look like a very powerful engine, like some v12 slr mclaren or other muscular beast I must admit I would love it if it would have wooden or carbon fiber/ceremic zirconia outer housing.

I do not think there is a winner, they are two exceptional tools that I use differently.

I like longer session with the Mighty. I start at prety low temp ( 175°C/345°F ) and I increase little by little when the auto-shut begin to buzz until there is no more vapor from the weed (200°C/390°F). I can spend 10 minutes on one bowl.

The vapcap is a quick and efficient way to extract a smalest amount of green ( compared with the Mighty ). I beleve it "click" around 210°C/410°F. It take me 1 or 2 minutes to spend 3/4 heat cycle if i'm in a hurry

I would like to test the Milanaa

thank you for the info, good to know that, if you use the m outside can you feel or hear the click?
I would love to check out that Milaana too, wondering if someone tried both and got something interesting to say about them. I know the Milaana takes little bit longer to preheat, but I like the Mighty preheated for a minute or two too.

I can compare a mighty and my omnivap but i dont think these both are really comparable, ill say i enjoy more my omnivap in the morning because i can manage the dosage and get vapor on demand, its ok with the bubbleer but it does almost better without, in the other way the mighty i dont use it much outside and more with the bubler where i think it got exeptionnl

do you use the Cu moded adaptor? Im not sure how it is called, the little glass piece which fits right into the middle, I think it was delta 9 labs who made them?
Does anybody know who was the maker of glass mouthpiece for mighty?
Thank you
Have a beautiful day everyone

 

[simplywonderful]

best and simplest and cheapest solution that happened to find me by accident (bought spare piece for arizer extreme q which I never ended up getting at the end), Im glad to see that for other members too, I like to keep tubing as short as possible so the cu mouthpiece touch the glass. Im wondering if something like this would be achievable with Plenty

 

[latulipe999]

thank you for the info, good to know that, if you use the m outside can you feel or hear the click?

You can totally feel the click if you do not hear it, even if you're standing in front of a concert stage or wall of sound

George is a Genius !!! #DynaVap RULEZ

"VapCap Click is Orgasmic"



EDIT : oups, i forget i was in the Mighty thread... high is real

 

[Vaporcussion]

o you use the Cu moded adaptor? Im not sure how it is called, the little glass piece which fits right into the middle, I think it was delta 9 labs who made them?
Does anybody know who was the maker of glass mouthpiece for mighty?
Thank you
Have a beautiful day everyone

You're confusing the glass mouthpiece (which fits in place of the plastic one on the CU) with the Delta V3 water adapter (which is not glass, but molded plastic) and fits right in the middle of the unit (over the bowl)

I got my glass mp from vapefans, came from Asia

 

[Koen]

the mighty is a great vape but its so ugly,

I think it's very cool and spacey looking, they could have use it in an "Alien" movie

 

[Vaporcussion]

I once had my crafty mistaken for a tazer by a drunk girl outside a bar

 

[Hogni]

I think it's very cool and spacey looking, they could have use it in an "Alien" movie

Don't wrong H.R. Giger! But I know what you mean.

 

[Koen]

Don't wrong H.R. Giger! But I know what you mean.

H.R. Giger would have liked the design of the mighty and crafty alot. Perfect for interplanetary travels

 

[Hogni]

Guess a bit too simple and geometric. Would need some more organic shaped accents.

 

[Flower of empathy]

yes, i'd say the volcano would fit better design wise, i'd guess aliens like bag vapes
But eg for storm troopers the crafty and darth vader with the mighty would fit...

 

[LesPlenty]

Don`t forget Flash Gordon with his Plenty Vaporizer/Raygun

 

[Hogni]

Volcano is typical 60ies Startrek and Plenty a Barbarella sex toy
Flash Gordon needs more streamline design.

 

[Vaporcussion]

I remember someone here boasting about how clean their bowl was, because they had only used capsules, never a native fill or with mesh pad. Well, I recently purchased a second Mighty for ($269!) and tried out this capsule only concept. I have to say, the bowl is immaculate, and I'm about 70 capsules in...

 

[Vapor4me]

I remember someone here boasting about how clean their bowl was, because they had only used capsules, never a native fill or with mesh pad. Well, I recently purchased a second Mighty for ($269!) and tried out this capsule only concept. I have to say, the bowl is immaculate, and I'm about 70 capsules in...

That could have been me, although I know I'm not the only one doing this, but my Mighty was only used with dosing caps, and kept looking like new, requiring minimal maintenance of the bowl.

 

[Donskills]

Trying to post a few pics of my "only caps" mighty after +500 capsules. Minimum maintainance.
https://drive.google.com/file/d/1tWZRm-nfcL49Jgkzzh3qVMgLzzqOby_T/view?usp=sharing
https://drive.google.com/file/d/1pDoFobKClmL467BnrRsK6BCGIWUUNFRO/view?usp=sharing
https://drive.google.com/file/d/1rkleujzL00CDe36ieeVguwRHL3mz6oto/view?usp=sharing

 

[mixchu69]

Trying to post a few pics of my "only caps" mighty after +500 capsules. Minimum maintainance.
https://drive.google.com/file/d/1tWZRm-nfcL49Jgkzzh3qVMgLzzqOby_T/view?usp=sharing
https://drive.google.com/file/d/1pDoFobKClmL467BnrRsK6BCGIWUUNFRO/view?usp=sharing
https://drive.google.com/file/d/1rkleujzL00CDe36ieeVguwRHL3mz6oto/view?usp=sharing

I do like the look of the clean ovens on the mighty's that only use capsules, but i have never had an issue with taste using capsules and direct load. And I rarely ever clean the bowl. Im wondering how many mighty users actually pop out the screen above the heater (not the cooling unit) and clean below. I would do it more often if ti was easier to take out the screens and not mangle them.

a note to all vape manufacturers: please make all screens easy to install. I really hate shaping, prodding, manipulating screens to make them fit.

 

[Vaporcussion]

Trying to post a few pics of my "only caps" mighty after +500 capsules. Minimum maintainance.

Looks great bro! I noticed that little brown ring around the bowl always sneaks up on you, so that's the spot to clean, even before you notice it...

Im wondering how many mighty users actually pop out the screen above the heater (not the cooling unit) and clean below.

I was amazed how much debris got underneath that screen, and clogged the air holes. You can't see it through the screen, so you just have to take it off every once in a while and look. As for getting the screen out, the trick is to get it to spin (turn in place) first. Once you get that, have patience and don't force it. It may take another 30 turns but all of a sudden, poof, it pops out, minimal damage. Good Luck!

 

[MonkeyTime]

I do like the look of the clean ovens on the mighty's that only use capsules, but i have never had an issue with taste using capsules and direct load. And I rarely ever clean the bowl. Im wondering how many mighty users actually pop out the screen above the heater (not the cooling unit) and clean below. I would do it more often if ti was easier to take out the screens and not mangle them.

a note to all vape manufacturers: please make all screens easy to install. I really hate shaping, prodding, manipulating screens to make them fit.

I'm with @Vaporcussion , but I've gotten in a habit of pushing down between the center dimple and the outer ring. Then I grab it with tweezers or get something underneath it. It does deform it a little, but I think anything I've tried has lol. A shot glass on it in the bathroom where I clean and it's almost as good as new.

 

[dzoinp]

I do like the look of the clean ovens on the mighty's that only use capsules, but i have never had an issue with taste using capsules and direct load. And I rarely ever clean the bowl. Im wondering how many mighty users actually pop out the screen above the heater (not the cooling unit) and clean below. I would do it more often if ti was easier to take out the screens and not mangle them.

a note to all vape manufacturers: please make all screens easy to install. I really hate shaping, prodding, manipulating screens to make them fit.

You should clean it from time to time ... it depends on usage.
Taking the screeen off is easy ... will always get crooked.
To re-insert it is very easy:
I use a marble (press the screen with the marble on a hard glass surface) to straighten the screen and then to give it the shape of a shell (press the screen with the marble in my hand), then push it into the groove with my fingers pressing it until it is flat.

 

[metalmancpa]

I do like the look of the clean ovens on the mighty's that only use capsules, but i have never had an issue with taste using capsules and direct load. And I rarely ever clean the bowl. Im wondering how many mighty users actually pop out the screen above the heater (not the cooling unit) and clean below. I would do it more often if ti was easier to take out the screens and not mangle them.

a note to all vape manufacturers: please make all screens easy to install. I really hate shaping, prodding, manipulating screens to make them fit.

I actually pulled the bottom screen and replaced a week ago, the first time since ownership. It was actually pretty easy. I use my Mighty for long stretches before even basic cleaning. I have found that tongs and a teapot work great for cleaning along with a few alcohol wipes. Hold parts to the steam, then wipe off.

 

[Vapor4me]

A question for all Mighty aficionados out there:

Having an option to get a regular Mighty or a Medic (and being a "regular" user, lol), why would you not opt for the Medic?

Your input would be appreciated.

 

[metalmancpa]

A question for all Mighty aficionados out there:

Having an option to get a regular Mighty or a Medic (and being a "regular" user, lol), why would you not opt for the Medic?

Your input would be appreciated.

I believe the Medic version was a compliance issue for Europe (and Canada) to be a medical device. I think it's just about labelling, yet it is identical to the Mighty.

 

[blackstone]

A question for all Mighty aficionados out there:

Having an option to get a regular Mighty or a Medic (and being a "regular" user, lol), why would you not opt for the Medic?

Your input would be appreciated.

If it were a Volcano I would pick the regular one as it goes to 230°C and i like that for liquid pad uses, while the Volcano medic only goes to 210.
The Mighty and Mighty medic have the same 210c ceiling and are virtually the same from what we know.
One difference is that the regular Mighty comes with a filling aid for direct to bowl filling, and the Medic replaces this item with an 8 capsule magazine.
There is the possibility that they go over the Medic units more thoroughly and you might have more peace of mind from this?

I think it's very cool and spacey looking, they could have use it in an "Alien" movie

yes, i'd say the volcano would fit better design wise, i'd guess aliens like bag vapes
But eg for storm troopers the crafty and darth vader with the mighty would fit...

I always thought of Batman and his belt of gadgets when I saw these vapes. Or maybe it shares some style of the last few Batmobiles, and I can imagine people saying those are a little ugly too!

Now you've got me thinking of a titanium HR. Giger edition Mighty! Although the price is already a huge concern for this!