Tallest
Member
Check the unit yourself and see if it has any of the new features.
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
I cant I don't have it with me I would go pick it up from the guy that's selling it if I want too but wanted to see if it was the new one
but what can I even look for if it new for any of the new features how can I guarantee its new?
Mod note: posts merged
but what can I even look for if it new for any of the new features how can I guarantee its new?
Mod note: posts merged
Last edited by a moderator:
Pharoh
Well-Known Member
I've had'em both...They both are nice...But MIGHTY doesn't require app and has large er battery......Also get the dosing capsules....you will be so glad you did...they keep the machine so clean....Get the MIGHTY. I have both devices, GET THE MIGHTY
Blackfriars
Connoisseur of cannabis
After RMA'ing three Craftys. I traded up to a Mighty. Don't even consider anything less! It's just better designed all around than the little Crafty.
Vaporcussion
Well-Known Member
I don't think there's much qc on those rubber seals, some are looser than others. I got lucky I guess, as I have 3 glass mp's; all seals are tight and I can lift the Mighty up by the mouthpiece and shake it, no slippage. The only time it happens is if I try to flip open/close the mp with one hand, using my thumb. Key is to push down gently on that base tip while swiveling, so it requires two hands. That's the only drawback I've found.
The taste! It's like a luxury room for the vapor to congregate in before it hits your mouth. Think of drinking juice in a plastic cup vs a glass cup. Someone also mentioned the different lip/tongue sensation since the shape is different.
Awesome. And you can easily see when it's time to clean.
Hi guys I'm new here so please bear with me if I ask questions/ responses that have already been addressed.
I have been vaping for over 7 years now so have been through the mill when it comes to vapourizer's (Kind of get what you pay for).
In regard to the glass mouth-piece, I have a glass mouthpiece on my Mighty and would never go back to the OEM. The glass mouthpiece has a slightly bigger mouthpiece so as Blackfriars states above it allows for more vapour to be inhaled thus you don't have to inhale as much as you do with the OEM. Another bonus is that you will never get that plastic smell or taste I have heard fellow vapours complain off.
GO FOR GLASS
Nice to know I'm not alone in this thought! It really has been a game changer for me.
I don't agree about plastic smell/taste from regular mp however; I never thought the mouthpiece tasted like anything; it was completely neutral (part of the S&B mystic; a vape made from metal and plastic that doesn't taste like metal or plastic)
Going back to the regular mp after using glass; it feels swished, too flat. A little boring! I cough more.
Mighty wins without question!
Tallest
Member
I 100% endorse that, as I've said previously on this thread it's a no brainier imo
Hotdamn
New Member
Yesterday I've used my unit the last time. I plugged the CU on it and heard a cracking. Now you can see a crack going through the plastic.
This is a very good tip, I will surely try it! It would be interesting to know how you did that?
I like the normal usage more too, but I had to test the water filtration and it's also good but not perfect, especially with this flange!
Hi mate, that picture looks extremely familiar to me (mine fractured the same way only a larger piece of plastic had Come away). You can initiate an RMA from the support section on the S&B website. Good luck
Yesterday I've put the CU on the Mighty and heard a little cracking, now my unit has this large crack going through the plastic. Not long and the other part will also break out. Take a look at the picture above.
I've contacted S&B through their Support-System and described the defect. Now I am waiting for an answer.
Thanks for the good Luck wishes. I hope this goes out well for me.
Last edited:
dwarfofpoison
Well-Known Member
02/21/2017; 10:59 am ET
Hello, everyone. Been a while but I wanted to touch base back on my feelings on the glass mouthpiece for $9 USD I got from Hong Kong. All in all, I would probably not buy one again. While I love the glass and the feel in the mouth, the unit is held in place by some plastic rings that want to slide up and out (taking the mouthpiece) with it once the unit heats up. I have some pics below so you can see what occurs with this unit. Unfortunately, the piece will pop up and out with enough jostling and temperature changing so the piece can fall out and hit the ground, which is what mine did the first night I had it. Needless to say, the mouthpiece chipped on the concrete it hit and a larger stress fracture is now there, rendering the piece unsafe and useless. Your mileage may vary? Thank you.
The Vaposhop
mouthpiece shows the glass mouthpiece incorrectly fitted When I fit mine the gadget goes inside the CcU with thicker
I emailed the company a couple of days ago but have not yet heard back. This is a tough one. I feel the design needs more refinement (especially that plastic "holder" and tempering of the glass).
dwarfofpoison
Well-Known Member
The Vaposhop picture of the fitted mouthpiece shows that it is fitted incorrectly, the gasket should be placed inside the CU. I think some of the problems you faced would be from trying to force the gasget and mouthpiece into the top of the CU.
Blackfriars
Connoisseur of cannabis
02/23/2017, 9:44 am ET
I will admit this is a possibility. There were no instructions (Chinese or English).
I am fool enough to re-order, which I just did. I also ordered the 18mm water adapter to give that a whirl. I really liked that mouth feel of the glass and so I want this to work.
Post #50. I did it naturally. ;-)
I will admit this is a possibility. There were no instructions (Chinese or English).
I am fool enough to re-order, which I just did. I also ordered the 18mm water adapter to give that a whirl. I really liked that mouth feel of the glass and so I want this to work.
Post #50. I did it naturally. ;-)
Last edited:
I prefer my Mighty for the most part ... but the size of the Crafty is very nice. The Crafty's performance is very close to that of the Mighty for 1 to 2 bowls, but then the heat recovery and heat up times become annoying. The Mighty goes strong for 6-8 bowls for me, with no noticeable drop in performance. Batteries on my Mighty are as good as the day I bought it. This is my 2nd Crafty, and battery is ok but could be better. It's off warranty so am in the process of doing my own replacement battery pack including wire harness (this might even improve it as some other members have suggested).
Hope that helps.
Well they are going for $500 from PV new so I would say 30% off ($150) is pretty good ... it is brand new w/ full warranty?
Is it from a retailer? If so then as long as you have a receipt I would think you would be fine ...
If not from a retailer than if you can get the receipt than it should be good from the date of the original receipt anyways (sort of ... technically warranty is not transferable)
If not from a retailer than if you can get the receipt than it should be good from the date of the original receipt anyways (sort of ... technically warranty is not transferable)
Tallest
Member
Hi Guys,
Quick question if you fill your Mighty/ Crafty bowl (0.2grams to 0.3grams) how many hits would you estimate getting out of the bowl if you vape at the default temp of 180 Celsius/ 356 Fahrenheit.
I know it also depends on the strength of the product you have inside etc. I read somewhere that 4-6 draws and your finished. I found that to be a little premature as I normally get about 12-15 hefty draws out of a bowl on 180 Celsius, I then may increase the temp to 195 Celsius to extract the reminisce of what's left.
How about you?
Quick question if you fill your Mighty/ Crafty bowl (0.2grams to 0.3grams) how many hits would you estimate getting out of the bowl if you vape at the default temp of 180 Celsius/ 356 Fahrenheit.
I know it also depends on the strength of the product you have inside etc. I read somewhere that 4-6 draws and your finished. I found that to be a little premature as I normally get about 12-15 hefty draws out of a bowl on 180 Celsius, I then may increase the temp to 195 Celsius to extract the reminisce of what's left.
How about you?
Baron23
Well-Known Member
Baron23 said: ↑
But I found I just didn't really like it as much as native with the Mighty and I have other vapes that I do use water with (EVO for example) and love it.
Very carefully. LOL
Seriously, just look at your S&B CU and look at the flanges on the WPA and you can easily see the slight but significant difference. Take any small grinding tool and just slowly and carefully round a bit where the WPA flange first enters the body's attachment and create a little bit of a ramp down to the end. At least mine was straight across the flange and needed a small bit of help.
Still don't really care for it all that much but its in the drawer with all of the other accessories.
Cheers
But I found I just didn't really like it as much as native with the Mighty and I have other vapes that I do use water with (EVO for example) and love it.
Very carefully. LOL
Seriously, just look at your S&B CU and look at the flanges on the WPA and you can easily see the slight but significant difference. Take any small grinding tool and just slowly and carefully round a bit where the WPA flange first enters the body's attachment and create a little bit of a ramp down to the end. At least mine was straight across the flange and needed a small bit of help.
Still don't really care for it all that much but its in the drawer with all of the other accessories.
Cheers
Baron23
Well-Known Member
Well, its not a matter of adjustment, its a matter of the flanges of the Easy Flow fitting well with the flanges of the vape's housing.
If you work it enough, you should be able to mount the Easy Flow the same as the CU. The one I got I could get maybe an 1/8 of a turn before it got so tight I was afraid to apply more pressure.
Amazingkaddycap
Well-Known Member
Thanks for the replies, in the end I decided to get the crafty again, the main factor behind my decision was the amount of accessories I have for it. Gonna pick up a mighty at a later date.
vapviking
Old & In the Way
All the Crafty accessories fit the Mighty, too and so does the cooling unit.
Amazingkaddycap
Well-Known Member
Dammit!!! , lol, its all good, I'll ride the crafty until it breaks again, and go for the upgrade
vapviking
Old & In the Way
I went thru 4 Crafty's in about 9 months before I got the more robust Mighty!
Tallest
Member
Hi Guys, a quick update to advise I received a brand new Mighty yesterday (BNIB) I'm chuffed with the S&B service. I sent it them on the 15th Feb so the whole procedure took 9 days. 2 words Fcuking brilliant.Hi Guys - I recently sent my MIGHTY back to S&B I have detailed the process below, it may be informative to someone.
I had an issue with my Mighty plastics fracturing/ cracking causing the CU to be a loose when connected to the Mighty. This was also causing the whole 3 inch (approx) heat chamber to move if a pushed with a bit of pressure. I got a RMA from S&B (no problems at all) and sent the unit minus the CU back to S&B on the 15/02/17 (cost me £12 for registered delivery, insurance & tracking, I could of sent it cheaper but thought I'd better play it safe as it cost me £280).
S&B contacted me via email on the 20/02/17 to advise they had received the Mighty & I would be contacted as soon as my device was repaired.
They contacted me on the 21/02/17 - I have pasted the correspondence below :
21.02.2017 – European Market
Hello Mr. *****,
your device has been received.
In regards to your defective housing, we can offer you either the replacement of the defective Housing free-of-charge, or, alternatively, a new MIGHTY for the price of 69,00 €.
Should you want to make use of our chargeable service, payment can be done by sending the requested amount of money (69.00€) to our Paypal account info@storz-bickel.com
Technical Support
Although I was advised the plastics would be repaired free of charge I wanted to go for a new Mighty as I had dropped my Mighty on numerous occasions (not causing huge damage but obviously it doesn't help the unit) but before opting for the replacement I asked the questions below.
21.02.2017 – Mr *******
Hi, if I went for the replacement at €69 would the mighty be a brand new and if so would it come with new vibration patterns & boost function. Additionally where can I get information on the new functions that the Mighty has.
They replied below:
21.02.2017 – European Market
Hello Mr. *******,
you will then get a brand new MIGHTY.
The booster temperature can be activated by means of a double-click on the orange-colored ON/OFF switch.
Please visit our homepage for further information under following link:
https://www.storz-bickel.com/media/dl/mighty/mighty-en.pdf
Please let us know how you want to proceed.
With kind regards,
Technical Support
With that being said I decided to go for a brand new mighty as it was only going to cost me £61.04 (69 euros) and as I have had this unit for approx 2 years I thought it was a no brainer. I will paste the rest of the correspondence I had with S&B below.
21.02.2017 Mr *******
I would like a brand new Mighty (I would like it to be the latest model Mighty with the boost function and new vibration patterns). I have made a €69 payment to your Paypal account, I have attached a screenshot of the payment.
22.02.2017
Hello ****** *******,
your device has been replaced.
You can track your UPS shipment 1Z550V736897001411 here
as soon as the device has been shipped.
Click here to check the status of your current RMA
and to contact our service team
I am patiently waiting for my brand new 2017 MIGHTY.....My experience with S&B was bliss I have not 1 complaint, I also thought the turn around time was brilliant.
Vaporcussion
Well-Known Member
We'll see you in a couple of months when you come crawling back here
Just kidding; enjoy your Crafty