Discontinued The Extreme Vaporizer Thread Part II

Status
Not open for further replies.

voidofidea

Well-Known Member
For the love of god someone help me how the hell do you connect the stupid mouthpieces to the balloon using the black ring? How do these people send you this stuff without any instructions?
 
voidofidea,
how to assemble bag;step 1- slip 1 O-ring on the glass end piece between 2 outer glass rings. gather bag opening titely(dont twist bag opening) & place the other O-ring around bag opening & roll the O-ring down around bag about 1 inch. now with the O-ring around bag fan/fold bag back until u can see the center opening of bag.
step 2- once u have found center opening of bag slide end piece into it(slide strait avoid bag punctures/rips) then pull/slip O-ring along with bag over glass outer ring of stem.
step 3-fold bag flap back & slip other O-ring (1 on glass end piece) back over same.
 
hemp;)goofy8cheerio,

voidofidea

Well-Known Member
Omfg i just jizzed my computer thanks bro

Actually I have no idea how to visualize what you said. Are you explaining how to attach the glass piece with two testicles on it to the garbage bag?

Let's make some definitions so we're on the same page.

THere is a glass mouth piece that looks like a dick. It came with two black rings that shape an O. Then there's the garbage bag. How do I put these shits together?

Yo i Think i made some progress. I managed to slip the dick into the hole at the enter but theres like a flower like shape created by the top of the bag know im saying? What do i do next
 
voidofidea,
sorry thats instructions from manual dunno how to help any better than that, don't use bags myself, i enjoy Q whip draws, sounds like u almost got it if u want to use bags & cant figure it out call/email arizer for help if no 1 chimes in to help soon
 
hemp;)goofy8cheerio,

hereatlast

Well-Known Member
void, I'm sure if you search this site you might be able to get another set of instructions and have more luck that way. Just reference the 'how to search' thread before you perform your search and I think you'll find what your looking for.
 
hereatlast,

VaporKing

Well-Known Member
hey guys,

i just turned on my Extreme and it was putting off a smell that was similar to burning plastic or electrical equiptment.

the last time i used it was about three weeks or a month ago and i vaped multiple bowls out of it without a problem.

if anyone has experienced this please let me know im going to contact Arizer tomorrow.

thanks, VK
 
VaporKing,

idontcare444

Well-Known Member
Hello, I just wanted to know if someone ever had a problem with the fan, I after only two or three months use my fan sometimes doesn't work. I select the speed on the remote, it shows on the display screen but doesn't work. Then I unplug it leave it off for a while, and when I try again everything works fine I'm able to use it regularly fill up two balloons of vapor and then it goes off again. I already contacted arizer and I will send it back, it's just that I've only recently starting using it and I really don't wanna go back to rolling splifs so I've been using the whip and holding off on sending it back to canada, has this ever happen to any of you, is it something simple I can fix my self?
Thank you
 
idontcare444,

pakalolo

Toolbag v1.1 (candidate)
Staff member
idontcare444, bummer. The fan on my Extreme just stopped working one day and Arizer immediately offered to replace it (same day response) but I was like you. I had no other vaporizer at the the time and I did not want to be without it. I seldom use the fan so I arranged with Arizer to do a swap at my convenience at a local dealer. I had to wait for the replacement to get there but that was no hardship for me. Perhaps you could explore a similar arrangement.

Two good things came from my experience: one, it confirmed how good Arizer customer service is, and two, it scared me into buying a Launch Box.

BTW, your problem has all the signs of being a heat-related circuit board issue and probably is not user-serviceable.
 
pakalolo,

thedeserttortoise

Well-Known Member
Just a quick note. I've read and been interested in all kinds of methods to add a valve, plastic wrap the mouthpiece, etc, etc.....when bagging. Guess what? The little glass pick that comes with the extreme is a perfect fit in the bag mouthpiece. Probably old news but I've never seen it in the threads before. I use it all the time now.... keeps the bag sealed overnight too. Happy New Year....
 
thedeserttortoise,
I recently got a Extreme Q, I been plugging the end of the whip with my finger and letting the air get stuck in so I get a thicker rip I have been using the fan speed 3. Does anyone know if this is bad for it ?

Thanks for the help:)
 
VapeKing420,
The answer I got to my question is not a true answer, if anyone has the real answer to my question please answer.
Nyc diesel have you done any research on if its bad to plug it? The answer you gave me to not use the fan I did some research and it said its fine to use the fan with the whip but I don't see anything about plugging the end.
 
VapeKing420,

hereatlast

Well-Known Member
VapeKing: not a problem to use the fan when using the whip but I would NOT cover the whip during this process. You certainly don't want to create a backlog of pressure, for milkier hits I would first adjust my hit speed (fan off) and style. Anyways, my advice is to not 'plug the end.' :2c:
 
hereatlast,
hereatlast said:
VapeKing: not a problem to use the fan when using the whip but I would NOT cover the whip during this process. You certainly don't want to create a backlog of pressure, for milkier hits I would first adjust my hit speed (fan off) and style. Anyways, my advice is to not 'plug the end.' :2c:


Thanks a lot for the advice using the extreme right now :)
 
VapeKing420,

toxicc

E11001420
Why trying to force the air to go slower at fan speed 3 when you can just put it at speed 1 or 2
 
toxicc,
hereatlast said:
VapeKing: not a problem to use the fan when using the whip but I would NOT cover the whip during this process. You certainly don't want to create a backlog of pressure, for milkier hits I would first adjust my hit speed (fan off) and style. Anyways, my advice is to not 'plug the end.' :2c:


Thanks a lot for the answer
 
VapeKing420,
toxicc said:
Why trying to force the air to go slower at fan speed 3 when you can just put it at speed 1 or 2

The reason I was doing this is the past is because I thought if I did so that I would just get a way better hit then to not cover. It makes sense not to, so I'm just going to vape normally and enjoy the being ripped :brow:
 
VapeKing420,
Hey I heard from more than one person that the extreme q can be at any temperature with out combustion. I vape at 235 .C Does anyone think this to high to be vaping at?
 
VapeKing420,

Persona Non Grata

turn on, tune in, hulk out
I think you could probably get combustion if you try hard enough. but I think your fine at 235C .vape at whatever temp suits you. I leave my Q at 195C pretty much all the time.

I used to use the fan on speed 1 with the whip. it is good for when your learning to use the whip, just draw at the same speed as the fan and then you get a feel for it.
 
Persona Non Grata,

VaporNation

Vaporizer Superstore
Retailer
Persona Non Grata said:
I think you could probably get combustion if you try hard enough. but I think your fine at 235C .vape at whatever temp suits you. I leave my Q at 195C pretty much all the time.

I used to use the fan on speed 1 with the whip. it is good for when your learning to use the whip, just draw at the same speed as the fan and then you get a feel for it.

I'm about the same. I prefer to vaporizer around 190C - 200C. Anything over 250C is overkill in my honest opinion.
 
VaporNation,

finchrock24

Proud MMJ Patient
I vape exclusively from 230* to 240*C. Don't get to caught up in the temperature that is displayed, think of it more as a reference point then and actual temperature.
 
finchrock24,

jasrich

Member
Hi all, I'm a new vaper and I'm trying to get the hang out of my Extreme. I'm getting a great first hit with the elbow pack method at 200C but I'm not sure if I'm getting even combustion because after another 1 or 2 much smaller hits, I usually have to stop to stir and I find a fair amount of green herb particles. After stirring what is left in the elbow I turn it up to 210 and maybe get a visible hit but sometimes not.

Does this sound like normal usage? I have had to reload many times, enough to not be conserving herbs as I hoped to with a vape but I'm writing it off to the leaning curve.

Thanks for any comments.
 
jasrich,
Status
Not open for further replies.
Top Bottom