oli
Well-Known Member
Thanks every thing is super clean, bit of a maniac for it
I 've ordered one of those Lazer thermoter to check the situation of my heater, will see once it gets here...
I'm also looking for a place to buy that glass adapter 18/18 like Ddave is using, any cheap places (europe) as I can not seem to find any, after 30 mins search, strange...
Newcastle
Stoned!
I order my adapter from the ebay link on DDaves information. They are 11 bucks which is better than my LHS that wants 38. I asked how they could charge so much for a 10 dollar piece. She said "WHERE ONLINE?" I replied yes and that's where I will purchase it! I won't go back!
oli
Well-Known Member
Think I got it:
http://www.ebay.com/itm/18MM-FEMALE...515?pt=LH_DefaultDomain_0&hash=item35d1650ddb
edit: I have also found this one that seems to be even shorter...
http://thehideawayonline.com/shop/wide-to-wide-female-to-female-adapter
Last edited:
FYI: Link to the DDave adapter in my signature updated. Same seller.
Regarding this one above, http://thehideawayonline.com/shop/wide-to-wide-female-to-female-adapter , Advise contacting the seller! This looks like one I found that didn't have accommodation for a screen in the middle, was just a straight pass-through. (If that is the case however, this would work if one solely wished to use the Elbow Pack method or SSV Wand). With Elbow pack and a no screen adapter, there will be occasional bits falling on top of the heater. Not with SSV wand)...
Regarding this one above, http://thehideawayonline.com/shop/wide-to-wide-female-to-female-adapter , Advise contacting the seller! This looks like one I found that didn't have accommodation for a screen in the middle, was just a straight pass-through. (If that is the case however, this would work if one solely wished to use the Elbow Pack method or SSV Wand). With Elbow pack and a no screen adapter, there will be occasional bits falling on top of the heater. Not with SSV wand)...
What about this formula?
The sandwich style
Anyone tried it yet?
I will tonight though, can't wait
The left option might be a little to close to the heater???
Nice! Have always been a fan of product enclosed by screens... keeps things tidy!
You'd like the DDave + SSV combo. Level of product to heater distance similar Just checked and my DDave screen sits at the same spot as the lower screen of your first picture, right at the rim of the top of the unit itself. (The SSV brings ease of use in loading, stirring (actually shaking), and emptying.)
Rock on!
oldiebutgoodie
Apostle, Church of Vaporization
1. Mason jar wrapped in aluminum foil (no light, no air).
2. There are bong cleaning solutions like Grunge Off but they're helluva lot more expensive than ISO. A concentrate like Simple Green will work if soaked a good while. Rinse, rinse, rinse (cleaners don't evaporate like solvents).
3. Depends on the quality, dryness, grind of the herb - and your setup.
4. About 1/3 up to the black tape, which IIRC is approx .15g (again varies with density, moisture, grind). Up to 1/2 if blowing a few bags.
5. Pref'd temp is highly subjective. So many variables, including herb, setup, and technique. Common here is starting at 170-190C, going up to 210-220C, with users often increasing the temp as the session progresses. Experiment.
6. About half a cyclone load using Fan 2 usually yields about 1 dense bag, 1 medium bag, and 1 very light bag.
Mr.Sifter
Well-Known Member
hello,
i purchased a used Eq 4.0 because of the price and the versatility.
Now I'm concerned about the build-quality and the used materials.
I've read something about melting plastic inside the airpath. (mica?)
Another point is the build-quality. I once owned an aromed4.0 and this compares to the EQ like mercedes benz to yoghurt.
So what now. Should i keep it?
What is it all about the mica-issue?
And is the EQ worth it ?
I want an easy to use Whip Vape for using once or twice a week.
Thank you
i purchased a used Eq 4.0 because of the price and the versatility.
Now I'm concerned about the build-quality and the used materials.
I've read something about melting plastic inside the airpath. (mica?)
Another point is the build-quality. I once owned an aromed4.0 and this compares to the EQ like mercedes benz to yoghurt.
So what now. Should i keep it?
What is it all about the mica-issue?
And is the EQ worth it ?
I want an easy to use Whip Vape for using once or twice a week.
Thank you
Newcastle
Stoned!
So I went back to the Cyclone bowl and elbow packs when I broke my DDave adapter. Now after going back to elbow packs I am not sure if I like the SSV wand and DDave adapter as well. This is going to take more testing! 
I like the way the SSV loads and the larger whip size. I just think I was using less MJ with the elbow pack and my ABV was coming out like coffee grounds. I also think I was getting better results with elbow as far as getting knocked on ass. SSV just not quite getting it done. Again not the final results just need lots more test.
My dhgate order should be here this week! It left San Francisco Sat. I was wondering if using the DDave adapter what temp to use for nice milky results? Are you guys getting better results with or without the adapter? I hated school but I am loving these test!
I like the way the SSV loads and the larger whip size. I just think I was using less MJ with the elbow pack and my ABV was coming out like coffee grounds. I also think I was getting better results with elbow as far as getting knocked on ass. SSV just not quite getting it done. Again not the final results just need lots more test. My dhgate order should be here this week! It left San Francisco Sat.
I was wondering if using the DDave adapter what temp to use for nice milky results? Are you guys getting better results with or without the adapter? I hated school but I am loving these test!
oli
Well-Known Member
What about this formula?
The sandwich style
Anyone tried it yet?
I will tonight though, can't wait
The left option might be a little to close to the heater???
So I have mess around and there isn't seem to be an issue with my heater afterall ???
Either of these options above work marvelously with the whip (big clouds!) but than I started to get ideas how to shorten this long silicone path and came up with this design (below) I was super excited only to find many people already using it!! But still I ABSOLUTELY love my EQ again!
Than I came up with this double sandwiched design and my God, Super big clouds!!
VapeXale Cloud eat your heart out
Newcastle
Stoned!
I think I could break glass in less than a weak like that. I am already down an elbow and an adapter. 
I have an elbow to elbow ready for use but wondering at what temp and with or without the adapter. I am trying to get ahead of the learning curve...
Oli I think I can here the vapexhale guys from here calling you a wanna
.lol Very nice!
I have an elbow to elbow ready for use but wondering at what temp and with or without the adapter. I am trying to get ahead of the learning curve...Oli I think I can here the vapexhale guys from here calling you a wanna
.lol Very nice!
Newcastle
Stoned!
Yes it has an 18mm female. I would also look at this one.http://www.dhgate.com/product/wp-01...e/166215931.html#myaccount_orderdetail-1-null I have both on order and should be here any day now.
Justpassedu
Well-Known Member
Ok i have asked this before with no responce. Does anybody or has anybody tried vaping wax ? Looking for soem advice on how to do so the proper way , i tried it by putting some between some flowers and avb , it worked but not as great as i wanted it to. Is there maybe a nail attachment we can add to the Eq's ? Thanks
Edit : Also wondering , what if i bought a glass nail setup such as this http://www.ebay.com/itm/18-mm-Glass...ultDomain_0&hash=item1c3d4e0623#ht_190wt_1019 , and instead of using that top peice i put the cyclone on top followed by the elbow , would something like that work for wax ?
Edit : Also wondering , what if i bought a glass nail setup such as this http://www.ebay.com/itm/18-mm-Glass...ultDomain_0&hash=item1c3d4e0623#ht_190wt_1019 , and instead of using that top peice i put the cyclone on top followed by the elbow , would something like that work for wax ?
Last edited:
In past postings of this thread I've mentioned in conversations with Seek, my attempts to create a system to vape concentrates. I was close, able to vape a dab-sized quantity of wax in a single draw. Unfortunately, the same setup would not vape oil or other concentrates without needing numerous draws to clear the product and making an "Extreme" mess! At least for the moment, besides the occasional concentrate sandwich success stories that circulate, I don't believe the EQ's heater can handle.
Justpassedu
Well-Known Member
Thanks Ddave , i just realised i have a few of those electric hand held vape pens and didnt know they made a attachment for oil,kief and wax so i ordered 1 to try.
oldiebutgoodie
Apostle, Church of Vaporization
Yes, it is safe. And a helluva lot less expensive.
oldiebutgoodie
Apostle, Church of Vaporization
Yes. Will you get an Arizer warranty with that purchase (or do you care)?
Justpassedu
Well-Known Member
No $100 is not a good deal if it is used even if it is new it's not such a great deal , acc. Alone will cost over the extra $40 you'd put in for a new 1 with full warranty. I'd grab a new one on eBay from a authorized dealer , there only $130-$150 .