seedy53
Well-Known Member
get a ball vap, the heavy face melter. b0 or b1, and many other brand/models
The Angus Halogen Vape by YLL Vape
- Thread starter YLLVAPE OFFICAL
- Start date
Medivapequeen
Well-Known Member
I already have a ceroma and taroma so I'm set for ball vapes. I love them though my desktop VAS is sorted now.
Dr. G
Vapman Collector*Vapman Beta Tester
Greetings everyone...I brought out my Angus to spark it up this morning...again, the smell of a mild burnt rubber smell pops out. I have used it enough to have done a burn off by now. Is there anything I can do to get rid of it? I am worried because it does not seem normal so...I shut it off. Is there anything I can do to remedy this? I might just have a bad unit and need another. I need advice. Thank you.
seedy53
Well-Known Member
clean again with iso 91% or more then try doing 10 burnouts empty, 5min each on max heat and see if that works
leanpubpackage
Well-Known Member
The smell is likely from the viton o ring that’s in the bowl. This is my least favorite thing about the angus because it does impart some flavor
Dr. G
Vapman Collector*Vapman Beta Tester
Ok...thank you both for answering. I will do the 10 burns and I will clean again with ISO....also, do I leave the oring? I don't touch that right? Can it come out and the problem gets solved? Anyway, I will do the ten burns and see how it goes. Thank you kindly ....appreciate it.
seedy53
Well-Known Member
let us know out come. leave oring too
Dr. G
Vapman Collector*Vapman Beta Tester
Ok. I am waiting for my son to come home from work. He will help me and will let you know. Thanks again...you all are very kind.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
You could try using a glass stem, anything with 14 mm male will fit at least as a mouthpiece bypassing the o-ring, though you will still fill the steel chamber (unless you want to load a tiny amount in the 14 mm male joint) I'm not sure if anyone is selling a more proper fitting glass stem yet, but some dynavap stems were fitting like the O'Connell old stubby WPA so possibly there are others
Dr. G
Vapman Collector*Vapman Beta Tester
I actually picked one glass stem when Angus came out...from Rogue Wax Works. I think he still has them for sale...the only thing is that it does not stay stiff. Poor choice of words...it does not stay. Its a bit wobbly. I will use that again. I tried it but, did not like the wobbly feel. But, I am going to try all of this soon tonight. Thank you very much.
Angus Micro Dose Stem
Angus Micro Dose Stem Simple solution for micro dosing or just stem loading. The bottom of the glass is flaired and needs to be pushed past the top O ring. Then when pulled back up, the O ring seals the chamber and the glass helps isolate the airpath. This stem can be used with either end. The...
vapeaveli420
Well-Known Member
Hey guys, few questions what exact bulb does the Angus take? And has anyone tried out the 1.5 ruby upgrade? Is it worth voiding the warranty for?
I could be wrong, but I don't think we ever got that bulb question answered. I believe only one person did the ruby upgrade:
I'm not certain but I think that's Bings doing the ruby mod for Grover.Ruuuuuuby, ruuuby Tuesday!
Watch World's First Ruby Driven Angus | Streamable
Watch "World's First Ruby Driven Angus" on Streamable.streamable.com
seedy53
Well-Known Member
Bing will do the Angus v1.5 ruby upgrade for anyone who will pay for the upgrade. that's what i understood, i could be wrong though. soothingvapours.ca
Yup. For $89.99 (CAD + one way shipping cost, I believe), they're in B.C. Considering the upgrade myself. https://www.soothingvapours.ca/product/yll-angus-convert/
BingsBuddery
Derelict Meatsack
Hey guys, indeed, I do the conversions for Soothing Vapours. I've done over 30 of them now, so there's a fair few out there at this point; in Canada, some in the USA, one way over in Wales! We sell brand new Angus that are converted, as well as having the option to send yours in for conversion. We also do bulb replacements and occassionally temp sensor repairs.
Also, bulb type is as follows: Philips GY6.35 50W 12V
imgur.io
Also, bulb type is as follows: Philips GY6.35 50W 12V
Angus Bulb Type
Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users like BingsBuddery.
imgur.io
seedy53
Well-Known Member
you know i want the best for you and think your upgrade is a fantastic and needed upgrade. Lee proved it on his Tabletop Bong YouTube site.Hey guys, indeed, I do the conversions for Soothing Vapours. I've done over 30 of them now, so there's a fair few out there at this point; in Canada, some in the USA, one way over in Wales! We sell brand new Angus that are converted, as well as having the option to send yours in for conversion. We also do bulb replacements and occassionally temp sensor repairs.
Also, bulb type is as follows: Philips GY6.35 50W 12V
Angus Bulb Type
Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users like BingsBuddery.
your current 420 deal, it almost made me use my stretched out credit card. when i have enough money i'll order one, but the shipping to usa is another expense for me and others.
Bing, i did not mean to speak for you, i did not know you were still monitoring this sub.
BingsBuddery
Derelict Meatsack
I appreciate the kind words and no apologies necessary, I only saw this cause @Grass Yes pinged me by quoting my former post, which I also appreciate. I'm just the technical servicing guy, Grover is in charge of all shipping and sales, but he always does his best to accomodate those in locations outside of Canada, though I definitely understand the shipping cost woes; I've ordered from the US a lot lately and its adding up.
chimpybits
Well-Known Member
Yes!!I've ordered from the US a lot lately and its adding up.
Shoe on other foot feels good
vapeaveli420
Well-Known Member
Can I send you mine from the UK? I have emailed soothing vapes but haven’t heard back.Hey guys, indeed, I do the conversions for Soothing Vapours. I've done over 30 of them now, so there's a fair few out there at this point; in Canada, some in the USA, one way over in Wales! We sell brand new Angus that are converted, as well as having the option to send yours in for conversion. We also do bulb replacements and occassionally temp sensor repairs.
Also, bulb type is as follows: Philips GY6.35 50W 12V
Angus Bulb Type
Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users like BingsBuddery.
Sorry, I haven't seen an email from you yet but we've been having some issues with the webstore email...my IT dude is on it. Please send me a PM and I'll give you a good address and we can chat. Sending used vapes through international borders can be a bit 'interesting', though.
Our flat rate shipping to the USA is $11 USD...I guarantee you that it is a LOT more expensive for the poor Canuckleheads ordering vape gear from the States.Yes!!
Shoe on other foot feels good
My 'burnt rubber' smell and taste while using the OG cooling unit came from the silicone gasket inside the cooling unit, right under the swivel mouthpiece. No amount of iso or soapy water washes would get rid of it. Burn offs almost seemed to make the problem worse ffs. The fix came by popping out the offending silicone piece and placing it on a sunny windowsill for 5 days, flipping it over occasionally. Rinsed it off, reassembled and fired up the unit. Problem solved! I can normally taste minute impurities in the vapour path and the OG cooling unit was now providing a clean draw. Sweet Sunshine!
Dr. G
Vapman Collector*Vapman Beta Tester
My son tried all sorts of things...its a shame. I like the way it looks. I never really had the chance with it. But, I will let him know what you did and try it. Thank you for the advice. I will wait for a part two on this vape if your suggestion does not work. Cheers everyone. I would love to give halogen a chance...never tried it really.
Do you have a cooling unit with a plastic mounting post for the screen or an all metal round centre screen assembly? The OG units had plastic posts and those silicone gaskets in the early units had some nasty off-gassing issues. I had one. I knew it was that because when I used the unit with the WPA the offending smell and taste wasn't present so I knew it had to come from the cooling unit. The next models with the upgraded metal post cooling units had silicone gaskets that didn't seem to off-gas nearly as bad but no doubt would still benefit from the UV treatment on a windowsill. Outdoors in the sun speeds things up.
Last edited:
Mad_Max
Well-Known Member
You could put rubies in that one!
imor jones
Well-Known Member
108€ but it seems, that they are not delivering to germany. 
and there would be taxes a and shipping anyway...
and there would be taxes a and shipping anyway...