Discontinued RBT Milaana 1, 2, 3

[ondemander]

There's the high temp screw version and the low temp screw version. Some buyers were sent both screws to swap out if I recall correctly.

 

[Shit Snacks]

There's the high temp screw version and the low temp screw version. Some buyers were sent both screws to swap out if I recall correctly.

Yes that is only for the Milaana3, based off the material of the screw, really the low temp was by special request... No other Milaana is like that, the others use different materials in general, +vapetrees asked about a Mi1 btw

 

[Vapetrees]

Best batteries, especially for single battery powered device, is Molicell P26A and I get em from 18650batterystore.com a few at a time since the shipping is reasonable there... Otherwise LG HE4 and HG2 were the classic in the past, can't go wrong with the Sony VTC5 if you want to spend more ofcourse

Hey just went to check the batteries out on the site you recommended. Why not go for the P28 with more mAh?

 

[Shit Snacks]

Hey just went to check the batteries out on the site you recommended. Why not go for the P28 with more mAh?

Yeah those are basically the same, the 200mah doesn't make much difference, I have both, go for em

 

[GoldenBud]

if anybody needs a link to a new button for the Mi3, i recommend - https://www.amazon.com/dp/B01FKXRYVE

(for the guide search in youtube Mi3 button repair)

the process is not too difficult to make done, Long Needle Plier helps for rotating the button at the end

 

[Vapetrees]

if anybody needs a link to a new button for the Mi3, i recommend - https://www.amazon.com/dp/B01FKXRYVE

(for the guide search in youtube Mi3 button repair)

the process is not too difficult to make done, Long Needle Plier helps for rotating the button at the end

That black one looks pretty cool

 

[GoldenBud]

That black one looks pretty cool

Definitely will buy it next time!

 

[eideal852]

Does anyone have a recommendation on what battery to use on an Milaana OG? Also, where to buy it. I’m not sure if something is wrong with my battery or my Milaana, I believe it is running cold. I can’t get Hogg temperatures on it with a charged battery. It could be that my battery is really old. The screw where the battery goes was loose, I tightened it and super glued it like Ryan suggested however, still low temperatures.

Does anyone have a recommendation on what battery to use on an Milaana OG? Also, where to buy it. I’m not sure if something is wrong with my battery or my Milaana, I believe it is running cold. I can’t get Hogg temperatures on it with a charged battery. It could be that my battery is really old. The screw where the battery goes was loose, I tightened it and super glued it like Ryan suggested however, still low temperatures.

I’m a bit late, but let me know if you have any luck with this.
My og (1.5?) is coool beans. It drove me nuts, but now it’s just my low temp preset.

CoolOG, Goldilocks Mi2, and Hottt 3.

I have a stock (hot) 3, but also the “cool screw”.
In fact, having the option to cool off the 3 is what made me learn how to stop worrying and love the cooler og.
Figured why bother to tame the beast if I already had gentle ben.
Anyway, that’s what I tell myself.
But I’d really like a proper-performing 1

 

[Vapetrees]

I’m a bit late, but let me know if you have any luck with this.
My og (1.5?) is coool beans. It drove me nuts, but now it’s just my low temp preset.

CoolOG, Goldilocks Mi2, and Hottt 3.

I have a stock (hot) 3, but also the “cool screw”.
In fact, having the option to cool off the 3 is what made me learn how to stop worrying and love the cooler og.
Figured why bother to tame the beast if I already had gentle ben.
Anyway, that’s what I tell myself.
But I’d really like a proper-performing 1

Hey I got the battery that @Shit Snacks recommended. I have not yet tried it though. But I will try it shortly, and get back to you. It may be that it just runs cool though.

 

[lakeabides]

Ive been able to spend a little more time with the Futo stems I purchased for my Mi2 and finally can enjoy them with changing up my technique.
Im happy that there are still multiple great options for a device no longer made.

 

[Vapetrees]

Ive been able to spend a little more time with the Futo stems I purchased for my Mi2 and finally can enjoy them with changing up my technique.
Im happy that there are still multiple great options for a device no longer made.

I’m glad you posted and brought this thread back because I was about to go looking for it . I’m glad you are enjoying your Mi2. I have an OG Mi and was asking about batteries recently. I got caught up using other vapes after I got the batteries. I have to thank @Shit Snacks for the recommendation. The Mi is amazing now. It extracts way better, and omg the flavor. The best flavor of any of my vaporizers. Omg. I have terpene mouth right now as I write this. I’m

 

[Duba]

A friend lent me its Milaana 1.5 to make him a jacket to protect the wood when he's not admiring it.
I made one with removable tab :

https://imgur.com/a/273oyRb

 

[Vapetrees]

A friend lent me its Milaana 1.5 to make him a jacket to protect the wood when he's not admiring it.
I made one with removable tab :

https://imgur.com/a/273oyRb

I know you’re trying to show off the case but can we get pics of the Mi? It’s so beautiful

 

[Vap O matic]

Hi everyone, I'm looking for a Milaana for my collection. Can anyone explain to me the difference between the Milaana 1, 1.5, 2 and 3. And more importantly, which one do you think is the best and why?

 

[GoldenBud]

Hi everyone, I'm looking for a Milaana for my collection. Can anyone explain to me the difference between the Milaana 1, 1.5, 2 and 3. And more importantly, which one do you think is the best and why?

Mi3 has less airflow (unless you use screwdriver/drill the hole) than Mi1/Mi2
Mi3 you can get only in 1 wood, only Ipe brazilian wood used in the production of Mi3

other than that, wait for another answers

 

[Vap O matic]

Mi3 has less airflow (unless you use screwdriver/drill the hole) than Mi1/Mi2
Mi3 you can get only in 1 wood, only Ipe brazilian wood used in the production of Mi3

other than that, wait for another answers

Thank you for the quick reply. That helps. I am looking for something made of walnut wood to match the FW7, but only if technically nothing speaks against it. I look forward to further opinions and information.

 

[BakedDiogenes]

Thank you for the quick reply. That helps. I am looking for something made of walnut wood to match the FW7, but only if technically nothing speaks against it. I look forward to further opinions and information.

From what I remember:

1 - maple, air hole on top, teardrop battery cover with no logo engraved
1.5 - other woods (spalted maple, Aspen, others?), air hole on top, same as 1 for battery cover
2 - various woods, logo on battery cover
3 - made in china, Ipe wood only

 

[cx714]

Also, air intake on Mi2 is a simple hole above the button; on the Mi3, the hole is centered in a relief RBT logo. Mi2 is taller/slimmer than Mi3.

In terms of availability in walnut, an Mi2 is probably your best bet. Good luck!

 

[Shit Snacks]

Hi everyone, I'm looking for a Milaana for my collection. Can anyone explain to me the difference between the Milaana 1, 1.5, 2 and 3. And more importantly, which one do you think is the best and why?

I suggest skimming backwards, I've explained the difference between them quite a few times in this thread... I'm kind of sick of doing it lol The best is totally relative, they're basically all the same, unregulated based on the battery with subtle differences, and it doesn't necessarily matter which number because the same number compared to the same number could be different... I think the 3 is the overall best most polished although it is 19/19 custom glass.

From what I remember:

1 - maple, air hole on top, teardrop battery cover with no logo engraved
1.5 - other woods (spalted maple, Aspen, others?), air hole on top, same as 1 for battery cover
2 - various woods, logo on battery cover
3 - made in china, Ipe wood only

This is incorrect, as I've said in the past, there are three versions of the Milaana 1 (OG, V1 and V2, which is the most polished and offered other woods aside from maple, cherry and walnut were standard, along with spalted maple and other exclusive exotics...) Mi2 and 1.5 have the squared off bottoms.

In terms of availability in walnut, an Mi2 is probably your best bet. Good luck!

Yeah if a used one can be found, but I like the Mi1 V2 better than Mi2 though it is easiest to find Mi3 (Ipe is often called Brazilian walnut, but it doesn't really look like regular walnut anyway)

 

[cliffhanger1]

And if i remember right from Milaana 3 exists 2 different versions of heaters.

 

[Shit Snacks]

And if i remember right from Milaana 3 exists 2 different versions of heaters.

Also incorrect, there was an alternative screw for the Mi3 to get it to run colder slower, heaters are always identical, really it is because the other screw is a material that is not as strong used in this implication so it is being less efficient with the power. I wouldn't even really consider that an option honestly I think the standard high temp version is always the way to go (modulate the button, that's what Milaana means btw)

 

[BakedDiogenes]

Snacks coming in and bitch slapping everyone with his encyclopedic RBT knowledge.

 

[KeroZen]

OG Z-Team represent!

 

[Vap O matic]

Hello everyone,

thank you very much for the valuable tips and helpful thoughts. This definitely helps to make a decision. After the description I would like to have a Mi2 in walnut.

In the end, the question will be which one I get.

Thanks everyone again for your hints I am glad that you share your experience with us.

 

[GetLeft]

The 3 is the most reliable version if that matters to you. It takes a little patience to get the knack of consistency with the earlier models. I love my 2 due to its size (perfectly pocketable) and colors, and while it's more reliable than the 1.5 I have, the 3 beats them both in the solid-hit-every-time department