BallzMcVinegar
Well-Known Member
This looks pretty awesome. I will keep an eye on this.
Ispire Wand, enail&vaporizer
- Thread starter PPN
- Start date
-
- Tags
- battery powered enail wand
SpacelyJetson
Well-Known Member
*delete*
Last edited:
Improvaper
Well-Known Member
I'm a cold start dude. You need kinda big hands to do this, but it honestly is my best e-dab in the house now. Very consistent and always tasty to the end. I dig it. But yeah, the stock carb cap sucks. Use a bubble.
Watch Wand 550° cold start 20s heatup | Streamable
Watch "Wand 550° cold start 20s heatup" on Streamable.
streamable.com
Bologna
(zombie) Woof.
**Update**
Noticed yet another mysterious $3.54 "International Transaction Fee" associated, but not informed of prior by SourceMOAR, extracted from my account (fuckers will nickel and dime you to death!) So, that brings the grand total to $121.57.... so far...
Noticed yet another mysterious $3.54 "International Transaction Fee" associated, but not informed of prior by SourceMOAR, extracted from my account (fuckers will nickel and dime you to death!) So, that brings the grand total to $121.57.... so far...
Last edited:
aquabats
Well-Known Member
So I bought this mainly to use with my dynavap. Let me say that it works amazing as an induction heater. Full extraction in one hit through water because I can feather the wand after the click, something I can't do with the Flux deluxe.
I think the wand might be the most complete induction heater currently on the market (USB-C charging, replaceable batteries, temperature control, ability to use while taking a hit) at a hell of a good price.
I think the wand might be the most complete induction heater currently on the market (USB-C charging, replaceable batteries, temperature control, ability to use while taking a hit) at a hell of a good price.
What temp are you using for the Wand with a DV?
aquabats
Well-Known Member
I'm still playing around with different settings. I get very dense clouds and coffee colored ABV at 450 degrees F. I think at 450 F, it most closely represents a low single flame torch. For more flavorful hits, I like it at 550 - 600 F.
Cannabliss*420
Well-Known Member
Has anyone used the flower cup? Just got in mail but there's no screens in box. Seems like herb will fall through the hole. Is There a technique to loading without screen?
Also what temp should I start at with flower?
Also what temp should I start at with flower?
Mndeadhead
Well-Known Member
YES!!! Love!!!
PPN
Volute of Vapor
Yes the Wand is actually the best IH for the DynaVap gear, I get a lot bigger clouds with the Wand than with my others IH and without the clic, it pushes the VapCap to another level imo. Although I don't understand the science behind this differences...
On my unit there is a switch to choose flower mode or enail mode, Idk if the most recent units without the flower feature advertisment still have that switch. I used the flower mode on low setting and I'm pretty happy with the results. Incredibly big and tasty clouds.
Somebody mentionned to heat a new Ti Tip and Ti cap... on my unit this is doesn't work, the Wand doesn't heat it (the blinking green led from flower mode change in red... and no heat) but works very well with my old M2017 stainless steel tip. Somebody else told me it was cause improvement DV made on the cap.
On my unit there is a switch to choose flower mode or enail mode, Idk if the most recent units without the flower feature advertisment still have that switch. I used the flower mode on low setting and I'm pretty happy with the results. Incredibly big and tasty clouds.
Somebody mentionned to heat a new Ti Tip and Ti cap... on my unit this is doesn't work, the Wand doesn't heat it (the blinking green led from flower mode change in red... and no heat) but works very well with my old M2017 stainless steel tip. Somebody else told me it was cause improvement DV made on the cap.
Cannabliss*420
Well-Known Member
thunderstealer1337
Well-Known Member
There is no ti cap, most likely your unit timed out? trying to heat the SS cap with the ti tip
PPN
Volute of Vapor
Sorry but I still not received my new camera, my phone's pictures are crappy and my old camera is dead. Just above the up and down buttons there is a switch which permits to select the mode you want. In flower mode you only have 4 settings (1 star to 4 stars), the low setting is the one I use with my VapCaps.
Oh yes you are right I wanted to say the new caps (since 2020) have different specifications and it seems this variance makes the new cap unable to heat in certains IH. @TommyDee told me the non-working new cap to make sense, here a link he sent me about that "issue":
Although I will try the old cap on the new tip and report ( my Wand is charging at the moment)
I have the JarHead and a new IH called ClickAndGo, Wand works noticeably better, I can get pretty thick low temp hits (without to hit the clic), really DV can be happy cause the Wand push the VapCaps in another sphere! Yesterday evening the London's fog cames in my living-room with one single bowl, no combustion involved only pure vapor!
Last edited:
Madri-Gal
Child Of The Revolution
My Ispire has jumped to the front of the line, and is now my favorite IH. My first attempts weren't fun, as I was overly worried about combustion, but it worked. I had my GRAV Circuit out recently, and the Ispire was at hand = Dynabliss. Huge clouds, perfectly browned ABV. As soon as I have my coffee, I'm going to try with Dynacoil. My glass is suddenly interesting again, and I'm going to be seeing how various pieces work with a VapCap and the Wand.
The only thing I don't love about this device is the name.
The only thing I don't love about this device is the name.
stonedmallone
Well-Known Member
man I have been trying to find a decently priced portable IH for my MVS and other dynavaps and this might be it. I do wonder how truly portable this is? it does look a bit bulkier than other IH. but if it's the best one out there, I think I need to have it 
.
.
Cannabliss*420
Well-Known Member
It fits in your pocket like a small TV remote would. I was at a party and used in conversation with nonvapers like I do the tafee bowle and it was nice. More portable than the orion imoman I have been trying to find a decently priced portable IH for my MVS and other dynavaps and this might be it. I do wonder how truly portable this is? it does look a bit bulkier than other IH. but if it's the best one out there, I think I need to have it
Bologna
(zombie) Woof.
Yeah really, why not "DIspiser", amirite...?!:
"I" anything, in fact...
Can't wait for mine to come, but I have absolutely no idea as SourceMOAR only uttered "10-15 days" at the time of sale...
Edit: it's hard to imagine it's better than my @Pipes Hotshot, all thing considered, as far as quality portable IH flower extraction goes... but if it works well with dabs, too, no need to tote both if the situation calls for it... I do like the DynaCoil, I just prefer glass (hopefully) and a little water.
Last edited:
I ordered The Wand a few days ago from Grasscity and it arrived today. I ordered from Grasscity, rather than from China, to get the batteries as I have no 18650 batteries. The two batteries are branded Aspire and labelled for 2900 mAh.
Topping off the batteries with my phone's USB C charger setup (rated 3 amp I think) made the batteries and device warmer than I would like.
No fourth button and apparently no dry herb setting. Firmware version 00.15.
Lowest temp setting is 250F. With no surprise I combusted on first try of running The Wand in auto mode with a Dynavap stainless cap when set to @250 and the bowl already warm from one hit.
My experience on the subject is pretty low, but is that possibly a simple temp sensor laying on the coil? If I bring the Dynavap cap closer to the sensor will it work somewhat in auto mode? (edit: no, it will not.)
My first impression from someone who
If I were using it to clear a Dynavap bowl in a hit or two I think this would give me more immediate success.
And, from someone who has never used a convection heater before and only used The Wand once so far, it seems that this would be a more natural match for the Dynavap if the coil was shorter.
Will there be a new bowl insert designed for vaping coming out in the future? I have to think that Ispire has at least discussed it.
Will the firmware be user updateable?
All that said - the effects of the Dynavap and Wand combo were pretty nice on round one.
Edit:
I broke one banger already. My fault for sure. But the glass is thin thin thin. Any of my other glass would have survived the fairly short tumble which broke the banger. A replacement banger at getispire.com costs $26.67 ($19 + $7.67 shipping) for me.
At 250F, in auto mode, a Dynavap sized load, with the surviving banger, an insert, the wand upside down and the carb cap over the bowl ---> awkward and combustion.
Topping off the batteries with my phone's USB C charger setup (rated 3 amp I think) made the batteries and device warmer than I would like.
No fourth button and apparently no dry herb setting. Firmware version 00.15.
Lowest temp setting is 250F. With no surprise I combusted on first try of running The Wand in auto mode with a Dynavap stainless cap when set to @250 and the bowl already warm from one hit.
My experience on the subject is pretty low, but is that possibly a simple temp sensor laying on the coil? If I bring the Dynavap cap closer to the sensor will it work somewhat in auto mode? (edit: no, it will not.)
My first impression from someone who
- usually session vapes through water
- uses a Dynavap stainless cap
- uses a triple torch with a moderate flame
- heats lower and slower on the cap
- toasts to a light/medium brown
- so far has only tried one bowl
If I were using it to clear a Dynavap bowl in a hit or two I think this would give me more immediate success.
And, from someone who has never used a convection heater before and only used The Wand once so far, it seems that this would be a more natural match for the Dynavap if the coil was shorter.
Will there be a new bowl insert designed for vaping coming out in the future? I have to think that Ispire has at least discussed it.
Will the firmware be user updateable?
All that said - the effects of the Dynavap and Wand combo were pretty nice on round one.
Edit:
I broke one banger already. My fault for sure. But the glass is thin thin thin. Any of my other glass would have survived the fairly short tumble which broke the banger. A replacement banger at getispire.com costs $26.67 ($19 + $7.67 shipping) for me.
At 250F, in auto mode, a Dynavap sized load, with the surviving banger, an insert, the wand upside down and the carb cap over the bowl ---> awkward and combustion.
Last edited:
Bologna
(zombie) Woof.
For those that went the SourceMOAR route, from getispire.com:
- Recommended batteries: 18650 3000mAh-3500mAh 30A with a minimum 15A CDR rating.
I always get Sony VT6 or LG HG2, both 3000mah, 20amp CDR and will power just about anything 18650.
The batteries will only draw what they need so a 3amp charger will not hurt, 18650 batteries get pretty hot when driven hard or charged fast. I like to charge my 18650 batteries with a designated battery charger (I use Nitecore as my Xstar burnt out) as it is one less heat cycle my vapes have to endure.
Bologna
(zombie) Woof.
ProfessionalHandJob
"A handjob is still a job, okay?"
Don't use the cup if you're using it with a dynavap. just put the dynavap alone into the IH and you'll be fine. Works great at that same temp with my 2017M and 2020 Ti OmniI ordered The Wand a few days ago from Grasscity and it arrived today. I ordered from Grasscity, rather than from China, to get the batteries as I have no 18650 batteries. The two batteries are branded Aspire and labelled for 2900 mAh.
Topping off the batteries with my phone's USB C charger setup (rated 3 amp I think) made the batteries and device warmer than I would like.
No fourth button and apparently no dry herb setting. Firmware version 00.15.
Lowest temp setting is 250F. With no surprise I combusted on first try of running The Wand in auto mode with a Dynavap stainless cap when set to @250 and the bowl already warm from one hit.
My experience on the subject is pretty low, but is that possibly a simple temp sensor laying on the coil? If I bring the Dynavap cap closer to the sensor will it work somewhat in auto mode? (edit: no, it will not.)
My first impression from someone who
The Wand is going to take some adapting to. Thankfully, the device is less bulky than I thought it would be.
- usually session vapes through water
- uses a Dynavap stainless cap
- uses a triple torch with a moderate flame
- heats lower and slower on the cap
- toasts to a light/medium brown
- so far has only tried one bowl
If I were using it to clear a Dynavap bowl in a hit or two I think this would give me more immediate success.
And, from someone who has never used a convection heater before and only used The Wand once so far, it seems that this would be a more natural match for the Dynavap if the coil was shorter.
Will there be a new bowl insert designed for vaping coming out in the future? I have to think that Ispire has at least discussed it.
Will the firmware be user updateable?
All that said - the effects of the Dynavap and Wand combo were pretty nice on round one.
Edit:
I broke one banger already. My fault for sure. But the glass is thin thin thin. Any of my other glass would have survived the fairly short tumble which broke the banger. A replacement banger at getispire.com costs $26.67 ($19 + $7.67 shipping) for me.
At 250F, in auto mode, a Dynavap sized load, with the surviving banger, an insert, the wand upside down and the carb cap over the bowl ---> awkward and combustion.
EDIT: oh, sounds like you used it just with the cup by itself but just dyna sized load. nevermind
Improvaper
Well-Known Member
So, there's obviously a lot of confusion regarding the different models (flower button or no) and inserts provided, so I've been trying to get some answers from Ispire (and perhaps a unit swap). Here's their reply:
"Every reviewer that we’ve had share the wand received the version that you have currently. The flower mode was a prototype and after continuous testing we found that it worked better without the extra button. It technically does exactly the same thing but without the added button.
We don’t have any of the Euro versions in stock and never received any as they were just a prototype.
Once you receive your dry herb cups you’ll be able to vaporize flower very well.
I personally use my wand everyday for flower use and I love it!
I still feel like what I got isn't what I saw reviewed some places, but I'm trying to get over it as they're being gracious enough to send me some dry herb buckets to try out myself at least. But if it works so well for dry herb, why remove references to it from the literature and why remove the inserts? I've replied with these questions and will report back what I hear.
FWIW, I've also got an affiliate code now. If anyone is looking for a small discount. improvaper15 will get you 15% off ordering directly from their site.
"Every reviewer that we’ve had share the wand received the version that you have currently. The flower mode was a prototype and after continuous testing we found that it worked better without the extra button. It technically does exactly the same thing but without the added button.
We don’t have any of the Euro versions in stock and never received any as they were just a prototype.
Once you receive your dry herb cups you’ll be able to vaporize flower very well.
I personally use my wand everyday for flower use and I love it!
I still feel like what I got isn't what I saw reviewed some places, but I'm trying to get over it as they're being gracious enough to send me some dry herb buckets to try out myself at least. But if it works so well for dry herb, why remove references to it from the literature and why remove the inserts? I've replied with these questions and will report back what I hear.
FWIW, I've also got an affiliate code now. If anyone is looking for a small discount. improvaper15 will get you 15% off ordering directly from their site.