btka
Well-Known Member
if you want microdosing then the enano is for you...
i am loading sometimes 0.01g maybe less and it works realy good (taste, visible vapor...is great...)
E-Nano from Epickai
if you want microdosing then the enano is for you...
i am loading sometimes 0.01g maybe less and it works realy good (taste, visible vapor...is great...)
NickDlow
Log Hog
Before: from @Snappo
After
(360 degree view: http://fuckcombustion.com/threads/e...g-vapes-vapor-stems.14039/page-15#post-674983)
Family pic
WOW @ACE OF VAPE!!!! Great job Andy, she is beautiful!! Thank you all in this forum, without u guys I would have never know about this beast. I'm preheating as we speak, actually type.. But anyway I picked up a 14mm all glass Gong, a 19mm adjust a bowl GonG, honeycomb direct draw stem, and some screens. I can't wait for her maiden voyage. Now I need some alone time with my new girl I'll talk to u guys after thank you all again.... Custom matching stems from @Ed's TnT are on route and should compliment my nano beautifully!! I'll show them once they arrive.
After
(360 degree view: http://fuckcombustion.com/threads/e...g-vapes-vapor-stems.14039/page-15#post-674983)
Family pic
WOW @ACE OF VAPE!!!! Great job Andy, she is beautiful!! Thank you all in this forum, without u guys I would have never know about this beast. I'm preheating as we speak, actually type.. But anyway I picked up a 14mm all glass Gong, a 19mm adjust a bowl GonG, honeycomb direct draw stem, and some screens. I can't wait for her maiden voyage. Now I need some alone time with my new girl I'll talk to u guys after thank you all again.... Custom matching stems from @Ed's TnT are on route and should compliment my nano beautifully!! I'll show them once they arrive.
Last edited:
TeeJay1952
Well-Known Member
The Lion King!
Reflections
Well-Known Member
Looks great Nickdlow..digging the wood from Snappo im guessing and what Andy did with it!
Nice family pic 2!
Nice family pic 2!
Just come home from a long day at the hospital just got back had a solo stem but what im really eating for is that woorm wood in my hands..... Wait reach over to fell how warm the nano is and I can fell it is ready.
Time to get high don't no how you guys do it fucking 1-2 hits I fill my stems with fine ground herb let my load sit for a 30s to a min
1st hit is so sweet and full of flavor
2nd hit sill have a lot of flavour with a strong punch
3-6 hits are a lot less flavor full but still very strong and after that it started to produce led a hit but I still got 4 more hits with visible vapor till I was done all his was done at 8.5 and I'm felling very good right now I really not to bother about flavor and like the popcorn taste
I fycking love my nano so I'm going for a 2nd stem
Time to get high don't no how you guys do it fucking 1-2 hits I fill my stems with fine ground herb let my load sit for a 30s to a min
1st hit is so sweet and full of flavor
2nd hit sill have a lot of flavour with a strong punch
3-6 hits are a lot less flavor full but still very strong and after that it started to produce led a hit but I still got 4 more hits with visible vapor till I was done all his was done at 8.5 and I'm felling very good right now I really not to bother about flavor and like the popcorn taste
I fycking love my nano so I'm going for a 2nd stem
I'd have to Google that: sometimes chillum means a cone of tobacco and hash or buds. Do they have mouth tips? I used another piece of tubing and added an old whip mouthpiece.
Caligula
Maximus
Normally you pack herb in front of the pinch and hit it like a pipe. In this case you would fit that over your stem/whip and use it as a mouth piece.
You haven't seen my movie?
Last edited:
EveryDayAmnesiac
Well-Known Member
breathe
Well-Known Member
@ACE OF VAPE liked my video haha I'm a little starstruck 
In all seriousness though, Andy you make an awesome product
In all seriousness though, Andy you make an awesome product
NickDlow
Log Hog
I had no idea I was missing all this flavor!!! Im getting the hang of it but still no milky hits. I have it plugged into a circuit with a lot of crap on it. Could that take power away from my nano? Should I bump up the dial? I had it at 8.5 n had the most vapor so far. What number on the dial does it start to combust? I also moved the bowl closer, it helped a bit but no milk shots.
No, even at max temperature, the nano doesn't draw that much current. It will not be affected dramatically by plugging into a crowded strip
Set it to 7 and let it preheat for 15 minutes until the exterior is nice and warm to the touch. If that doesn't help produce milky vapor, your problem is distance from the heat - you most likely need to move the adjustable basket closer to the heat (use the notched section on your Epik as a guide)
Actually have made quite a few exotic walnut nE-Nanos from gun stock stock. I'll post pix next time.
Gray Area
Well-Known Member
I really think the numbers are arbitrary, and results will vary lots due to the design/simple build of the dial too.
I can combust on 7 if it's been on for a while and the herb is too close to the heater... Then I've heard others say they use it at a higher number in the dial and allow the herb to touch the heater screen.
My perfect spot is 6.5 (well warmed through) and load lightly tamped down around half an inch - I have a tamper/stir tool thingy from Ed and asked for half inch so get a consistent distance from the heater. There is probably a 2-3 mm gap between load and heater.
If the load settles after the first hit, I'll push the screen up a bit to maintain this distance from the heater port.
Works like a dream for me this way
I can combust on 7 if it's been on for a while and the herb is too close to the heater... Then I've heard others say they use it at a higher number in the dial and allow the herb to touch the heater screen.
My perfect spot is 6.5 (well warmed through) and load lightly tamped down around half an inch - I have a tamper/stir tool thingy from Ed and asked for half inch so get a consistent distance from the heater. There is probably a 2-3 mm gap between load and heater.
If the load settles after the first hit, I'll push the screen up a bit to maintain this distance from the heater port.
Works like a dream for me this way
Is a wood blank sold as "acrylic stabilized" okay for use for an exotic nano?
herbalist33
Well-Known Member
@NickDlow im not sure if it makes a difference but I'm using a mflb orbiter which is a small bubbler with a whip, and I found, after getting the load closer to the rod, and messing around with temps, I actually needed to draw quicker to get it to milk.
That's pretty much the opposite of what I have to do when using the mflb+orbiter to obtain the same results. I can really milk the orbiter with no combustion at all, and I'm getting the hang of it with the enano, but like I said, my techniques is completely different.
Tl;Dr- try drawing faster, even though that goes against your logic... Try it at 8 I'd say.
Oh and post your results
That's pretty much the opposite of what I have to do when using the mflb+orbiter to obtain the same results. I can really milk the orbiter with no combustion at all, and I'm getting the hang of it with the enano, but like I said, my techniques is completely different.
Tl;Dr- try drawing faster, even though that goes against your logic... Try it at 8 I'd say.
Oh and post your results
NickDlow
Log Hog
Thanks @herbalist33 shes about don't preheating on 8. I have been drawing slow I'll try to speed it up n see what happens. Just what I need after work
Edit: Thank you everyone for the tips defiantly improvement! A bit to medicated and tired I'll give it a better shot tomorrow n let you guys know how I make out thanks again everyone!
Edit: Thank you everyone for the tips defiantly improvement! A bit to medicated and tired I'll give it a better shot tomorrow n let you guys know how I make out thanks again everyone!
Last edited:
btka
Well-Known Member
@NickDlow I have also noticed using a bubbler you have to draw faster then using the stem... i think someone mentioned here that the bubbler (water, honeycomb and so on) by itself creates a resistance so you don t have to draw as slow as with the stem.. ionce i recommended a triend using the bubbler he should draw slow ... after not milking ... i told him to draw as he likes... he drawed faster and milked the b. ?.. at the end there are technic wise three thinks you have to varie take care...
1. Draw speed
2. Temp. Setting
3. Basket distance
and let the nano pre heat so it feels warm... hot.. if you touch it...
I would play arroundbwith this three important points until younare satisfied
@ACE OF VAPE i stumbled upon turkish walnut... as i understood its famous for gun stock use... hmmm would like to have an enano made of this wood... but don t know where to purchase.. and @Snappo don t have it...
1. Draw speed
2. Temp. Setting
3. Basket distance
and let the nano pre heat so it feels warm... hot.. if you touch it...
I would play arroundbwith this three important points until younare satisfied
@ACE OF VAPE i stumbled upon turkish walnut... as i understood its famous for gun stock use... hmmm would like to have an enano made of this wood... but don t know where to purchase.. and @Snappo don t have it...
It's challenging to explain without pictures so I made one.....
Basically, rest your EPik on the opening to your stem using the notch shown in the picture . The bottom of the pick should touch the basket screen. I find this to be the optimal height for my screens when loading approximately 0.1g of material. You may need to adjust the screen closer to the heat, but I find usually this to be an optimal height for vapor production.
Last edited by a moderator:
max
Out to lunch
Wood blank prices vary a lot according to availability, since some can only be harvested from trees already on the ground. This wood is very expensive and a blank may cost you 2-3 times as much as the vape itself. You'd be better off browsing sites that sell wood blanks and just choosing from what they have. Also keep in mind that if the wood you choose is partially air dried, vs. kiln dried, that there's no guarantee it'll survive the e-nano cutting process without cracking open.