ataxian
PALE BLUE DOT
The SOLO daytime.
The NANO bed time.
E-Nano from Epickai
The NANO bed time.
Wow! I own a Purple Days which I like greatly, but this variable heat control is the bee's knees. The E-nano seems to me to deliver all a person would want from a plug-in vape. Especially if flavor, huge hits, and conservation of product are near and dear to a person's goal of usage. I am glad to add the E-nano to my arsenal of personal vapes. It is, indeed, a winner.
In fact, I bought two units on MassDrop with the idea of gifting one. Now, I'm afraid I must keep them both.
In fact, I bought two units on MassDrop with the idea of gifting one. Now, I'm afraid I must keep them both.
Last edited:
Caligula
Maximus
What time is it? It's Nano time all the time!
Caligula
Maximus
A sound plan indeed my friend!
So I unboxed my second unit for upstair's usage. I am surprised and pleased that the little glass lip in the stem stops the heating element so that it does not crush the medicine. The glass stem's lip of the downstair's unit doesn't stop the heating element - it gets close and personal to the mj.
Thems the breaks with hand-blown artisan glass. I'll look for a wire spring for inside the glass, or a http://www.bakfin.com/starlock/metric-roundshaft.html.
Any other ideas?
Thems the breaks with hand-blown artisan glass. I'll look for a wire spring for inside the glass, or a http://www.bakfin.com/starlock/metric-roundshaft.html.
Any other ideas?
What? To be careful? The very idea.... It must be idiot-proof, as I'm an idiot.
GonGs on the way.
Last edited:
Try 5.5 and see how that goes. Smaller loads are better at lower temps FYI.
flotntoke
thoroughly vaped
That sucks. Bet it can be hard to be ginger with the distance with no stop. Think @Caligula is spot on - small load, turn heat down and let it touch. Or, if your using adjust-a-bowl screens you could use one as a stop in the tube. Should be room if you push the regular one in, but a pain in the ass to dump and reload.
Glass is too wide, right? If you let Andy know he'll probably send a replacement right out. Then you won't have to futz with it too long. Probably get to you just as quick as a starlock.
421
Well-Known Member
I love my E-Nano but it's time to put Epicvape on blast. Why? Because accountability is good.
Short story:
-Ordered an Adjust-A-Bowl GonG, came damaged, the glass was cracked on the inside, pic here. I immediately notified them via the website (June 23). Took about a month to get in contact with me, after I PM'd Andy here after two tries via the website. Still haven't gotten a refund yet though, am hoping it comes soon.
-Ordered two all glass GonGs recently, just got one all glass GonG. So, basically 2 out of 2 orders, both messed up, didn't get what I paid for. I'm not feeling too great either because of how long it's taken for traction to occur on my first order's mess up.
Still a great product but the company needs work. I'd be spending more money there if it were better run.
Short story:
-Ordered an Adjust-A-Bowl GonG, came damaged, the glass was cracked on the inside, pic here. I immediately notified them via the website (June 23). Took about a month to get in contact with me, after I PM'd Andy here after two tries via the website. Still haven't gotten a refund yet though, am hoping it comes soon.
-Ordered two all glass GonGs recently, just got one all glass GonG. So, basically 2 out of 2 orders, both messed up, didn't get what I paid for. I'm not feeling too great either because of how long it's taken for traction to occur on my first order's mess up.
Still a great product but the company needs work. I'd be spending more money there if it were better run.
Well, I've ordered a few of the gong/bowl adapters for attaching to other glass. That really is the only time I can see feeling the need for hands-free. Otherwise, it is no big deal to insert the element to wherever you want and apply a small counter-force or "kink" between the glass and the element. I wouldn't want to bother the manufacturer. It certainly not a deal-killer.
On another note, I'm going to find some ponytail bands that have a nob so that I may make my stems roll-less. Clumsy me will let them roll off the table for certain breakage. God, I'm bad.
Last edited:
421
Well-Known Member
Yeah. It's at the 1 o'clock and the 10 o'clock positions (looking at the picture straight on). Two cracks. They're not cosmetic cracks, else I probably wouldn't care. I put my poker tool to feel in them and they are definitely physical cracks.
GrilledGoat
New Places
My E-Nano got here today! Wow this thing milks like the lotus but without all the effort! Love the way my cherry wood looked! I didn't know wood could have so many overlapping textures.
Edit: My knob goes to 11 but cant be turned to it? hmm
Edit: My knob goes to 11 but cant be turned to it? hmm
Last edited:
Propaganja
Well-Known Member
wow ur so lucky @GrilledGoat when did you order, and what city u live in =)
Welcome to the exclusive club! I thought the same thing when I first hit it - just like my Nano, without the effort!
Although don't get me wrong, I absolutely love the speed and efficiency of the Lotus. But the Nano get's the most use these days!
Still can't stop staring at this Afzelia burl. I love it!
ataxian
PALE BLUE DOT
GrilledGoat
New Places
I ordered on the 9th and am in the humid south.
@Ratchett
Ahh I love the burl! I can see more in this wood than I have ever seen in wood before...
.. and I just have the Cherry!Flavor country is the truth, with the D020 with water right below the top of the slits this thing tastes.. - dare I say - better than the lotus dry!
flotntoke
thoroughly vaped
Oh, the FLAVORS!! Is delish on top of the D020, but try other stuff as you can. nano gives great flavor with everything, but some a bit better than others. IMO ultimate flavor is at 5.5 on my dial. I use a dry stem with just a small bit in it, get the heat pretty close, and take a long slow draw. Amazing!!!
If you're being conservative (like I usually am), kick the heat up 6.5 and finish. Lately I like to do a few small low temp loads and dump them in a dish. Enjoy the nice happy/buzzy lift for a bit. Then take the heat up to 6.5 - 7, move the screen down a little, make loads a bit larger, throw it on a bubbler and vape the rest out of it. Not as tasty, but almost as efficient - especially if you're looking for the heavy buzz.
ataxian
PALE BLUE DOT
I used the D022 so I guess I'm not cool?Oh, the FLAVORS!! Is delish on top of the D020, but try other stuff as you can. nano gives great flavor with everything, but some a bit better than others. IMO ultimate flavor is at 5.5 on my dial. I use a dry stem with just a small bit in it, get the heat pretty close, and take a long slow draw. Amazing!!!
If you're being conservative (like I usually am), kick the heat up 6.5 and finish. Lately I like to do a few small low temp loads and dump them in a dish. Enjoy the nice happy/buzzy lift for a bit. Then take the heat up to 6.5 - 7, move the screen down a little, make loads a bit larger, throw it on a bubbler and vape the rest out of it. Not as tasty, but almost as efficient - especially if you're looking for the heavy buzz.
OK I get it!
D020 tomorrow session of:
Wake and Vake!
Night cap D022 because I'm too lazy to change setups!
I'm just lucky it works well!
GrilledGoat
New Places
If you're being conservative (like I usually am), kick the heat up 6.5 and finish. Lately I like to do a few small low temp loads and dump them in a dish. Enjoy the nice happy/buzzy lift for a bit. Then take the heat up to 6.5 - 7, move the screen down a little, make loads a bit larger, throw it on a bubbler and vape the rest out of it. Not as tasty, but almost as efficient - especially if you're looking for the heavy buzz.
Sounds like my morning plan
ataxian
PALE BLUE DOT
Ok your location is the bud belt?Sounds like my morning plan
Reclaim?
Not necessary in the bud belt!
FYI
Welcome to the fun!
