notlow
Active Member
Hey man, what do you think this is? A discussion board or something? Get out of here with that!
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
Hey man, what do you think this is? A discussion board or something? Get out of here with that!
flammy
Well-Known Member
I can see how someone might have thought that @vapenerd and I were arguing but I honestly didn't take any offense to our back and forth. I'm sorry if it appeared that way but I can assure everyone that I wasn't upset or offended. I don't take things like this personally...it's healthy discourse as far as I'm concerned. If something personal was brewing, I would have taken it to PMs.
Also, I don't want people to mistake my comments regarding the Apollo. I'm sure it's a good heater and people will purchase and enjoy it. The 12 month warranty is a nice duration and will put a lot of minds at ease I'm sure. Due to that, I'd have to imagine that it's not going to be a terrible heater by any means.
Although it's probably a good heater, I feel like the other existing heaters will still easily have a place in the market. I'm still going to get a Fluxer when my turn comes up (been waiting since late Feb) and I will want another @phattpiggie custom IH enclosure (has @Pipes barebones inside)...here is mine that I have posted elsewhere here:
We still don't confirmation on the specs for the battery powered unit so its probably too early to judge the Apollo fairly. And with that said, I will reserve any further judgement until more details on both versions have been officially released.
caliganja420
Well-Known Member
All i can say, if the IH doesn’t last more then 15 bowls, its a waste of money, also, need a user replaceable batteries for us heavy users.
nonamekevin
Well-Known Member
Is the SJK IH still a thing? I bought mine off Amazon along with a ddave mod for it, never had a single problem. $65 total, and I got both within a week. It's not portable, if that's what people are really looking for.
Honestly, I don't even use the IH anymore. I typically get heat ups faster or on par with my single torch when compare to the SJK, and I can take the torch wherever, but the SJK is limited to the cord.
Honestly, I don't even use the IH anymore. I typically get heat ups faster or on par with my single torch when compare to the SJK, and I can take the torch wherever, but the SJK is limited to the cord.
cybrguy
Putin is a War Criminal
I really really love that piece. As much as I enjoy having Donnie in a jar, I would swap it out for that in a New York second.
It isn't about speed at all for me, it is about ease and consistency. I have no problems using a torch, but I much prefer my JarHead when using VCs at home. I think holding it vertically (like the SJK) might be less "easy".
Last edited:
Really? Must be a weak IH then.
I despise the torch.
nonamekevin
Well-Known Member
The SJK was definitely never designed for vapcaps, so you're right.
Dental Power Dental Lab Infrared... https://www.amazon.com/dp/B0114AD8TO?ref=ppx_pop_mob_ap_share
Chandler
Well-Known Member
basically a Flux deluxe. Or Mother deluxe perhaps?
My optimum would be one 18650. 20-25 clicks 4-5 bowls, or 5-10 for the flavour chasers. That's the only way to achieve true stealth with an ih I can see. Or new stronger smaller energy source
letter never sent
reckoner
I don’t use my IH much anymore because it heats too aggressively IMO. I have a PSM for reference. I didn’t have an issue until I upgraded to an Omni. The only explanation I can think of is that the Ti tip heats up faster than the cap, so once the cap clicks, the tip is already at a higher temperature, and I get a toasty tasting hit right off the bat. This can be dealt with by removing the Omni from the IH before the click, but that takes away from the simplicity and convenience of the experience IMO. I don’t want any guesswork when using my Dynavap.
I never see anyone else complaining about this so perhaps my IH simply runs hot?
I never see anyone else complaining about this so perhaps my IH simply runs hot?
Ramahs
Fucking Combustion (mostly) Since February 2017
That's pretty. I should seriously consider getting one!
I don't think I'd buy one that uses a battery, without useable replaceable batteries.
Monk Debate
The monks do be debatin’
Isn’t there a portable IH that takes three 21700 batteries? That seems like the one I’d get if I really wanted a long lasting portable IH.
Baron23
Well-Known Member
I think you are talking a Flux heater and I thought they were 18650s but may be wrong.
It also has a six month wait time.
I don’t use my IH much anymore because it heats too aggressively IMO. I have a PSM for reference. I didn’t have an issue until I upgraded to an Omni. The only explanation I can think of is that the Ti tip heats up faster than the cap, so once the cap clicks, the tip is already at a higher temperature, and I get a toasty tasting hit right off the bat. This can be dealt with by removing the Omni from the IH before the click, but that takes away from the simplicity and convenience of the experience IMO. I don’t want any guesswork when using my Dynavap.
I never see anyone else complaining about this so perhaps my IH simply runs hot?
I have a similar issue with my Caldron and it’s unusable. I have a PSM with no issue. My caldron roasts the first hit way too hot and combusts on the second. Tried with like 10 different tips and caps all with the same result. So I think it’s more of a QC issue than a universal IH issue.
Vaped2Space
Well-Known Member
I think fluxer has or will have a 26650 version
Dynalowrider
Well-Known Member
#MAbud Try adjust your tip insertion, less in less heat. Doc
vapenerd
Well-Known Member
So my Hydravong XLS light wood arrived. I just used it for the very first time and ... combusted! 
Although I respected the click and heated the vong very conservatively. That took me by suprise.
The only explanation I have is that it comes with a Ti tip. I prefer SS tips. I have perfected my technique with SS tips and never combust with them. Can't say the same for Ti tips which I don't like that much.
Other than that ... well, I think it looks pretty cool. But of course that's purely a matter of taste.
Although I respected the click and heated the vong very conservatively. That took me by suprise.The only explanation I have is that it comes with a Ti tip. I prefer SS tips. I have perfected my technique with SS tips and never combust with them. Can't say the same for Ti tips which I don't like that much.
Other than that ... well, I think it looks pretty cool. But of course that's purely a matter of taste.
Last edited:
Monk Debate
The monks do be debatin’
No, I had to look it up, it’s the Sky Flyer Shadow Deluxe: http://skyflyerinductionheaters.com/shadowdeluxe.html
Same price as the new portable LC/DV IH, but runs on three 21700 batteries. Pretty cool!
https://www.reddit.com/r/vaporents/comments/bvzu1w/sky_flyer_shadow_deluxe_induction_heater_with/
Monk Debate
The monks do be debatin’
Well, can’t have it both ways. If you want a lot of heat ups, you need bigger batteries. Bigger batteries means less portable.
Unless again you go for the Mistvape Beast and put it on a dual 21700 box mod. That would be the most portable and still long lasting. But it’ll be about $200 when you factor in the cost of the mod.
Unless again you go for the Mistvape Beast and put it on a dual 21700 box mod. That would be the most portable and still long lasting. But it’ll be about $200 when you factor in the cost of the mod.
Just checked back through the IH thread and my tally on Vtc4 batteries, 2100mah, was 39 bowls.
warren0728
Well-Known Member
i have found the opposite experience ... my caldron roasts the bud evenly and heats up the tip perfectly (both ss and titanium tips) ... i just respect the click although i do go a couple seconds past the click on the initial heating
What @Dynalowrider said. Putting a 10mm glass bead in my Caldron gives me the perfect temp, but I'm a low-temp guy.