Dynavap VapCap

[thejackalsmark]

I have the curved one as well. I would prefer the flat sone instead, as I have no real use for the curved one.
They can also be used as a Dynavap vaporizer stand if you rotate one tool 90degrees perpendicular to the other.

During the beta testing, @RogueGuy and I were talking about so many different setups and use cases that you could come up with for this tool!

For instance....

Tweezers that can be set up with either specialized points or flat paddle like ends.

Allowing you to use them to do pretty cool extra things, like...

Handling that hot dynacoil when you clear your tip!
(Tweezers for Dynacoil was @RogueGuy 's awesome idea!
Not owning a DynaCoil myself, I'd have never thought of it.)

I've probably come up with as many uses for the tool OUTSIDE of this thread's topic as I have INSIDE it!

For instance, the pointed end Tool makes an excellent letter opener!

There are literally TONS of potential uses for this tool in all kinds of areas!

@danielj Niiiice 3 dimensional thinkin, btw!

Happy Vaping!

 

[jackmormon]

Battery or wall power only version?

If battery, what batteries (type and qty) are in there, please?

Wall power unit. No idea on the batteries. I actually ordered the V1 and was nicely surprised by receiving a V2.

 

[danielj]

During the beta testing, @RogueGuy and I were talking about so many different setups and use cases that you could come up with for this tool!

For instance....

Tweezers that can be set up with either specialized points or flat paddle like ends.

Allowing you to use them to do pretty cool extra things, like...

Handling that hot dynacoil when you clear your tip!

I've probably come up with as many uses for the tool OUTSIDE of this thread's topic as I have INSIDE it!

For instance, the pointed end Tool makes an excellent letter opener!

There are literally TONS of potential uses for this tool in all kinds of areas!

@danielj Niiiice 3 dimensional thinkin, btw!

Happy Vaping!

Oh, neat! tell us more uses!

I thought the pointy one would make an excellent throwing dart, if you had one w/out the magnet
or spearing pieces in a stir fry to taste test while cooking

 

[thejackalsmark]

Oh, neat! tell us more uses!

I thought the pointy one would make an excellent throwing dart, if you had one w/out the magnet
or spearing pieces in a stir fry to taste test while cooking

LMMFAO!
Man, you must be watching me or something. I speared a meatball during dinner one night with the pointy end tool to be funny. LOL

Here's a NEW one, on the spot!

impromptu Money Clip!


Happy Vaping!

 

[phattpiggie]

Thank you @Squiby, yes I've made some stubbies in the past.

@pheknow a long while ago I did an 18 male which was also a 14mm female VC stem.
Feel free to get in touch anytime if you'd like to work something out.

 

[stark1]

I have the curved one as well. I would prefer the flat sone instead, as I have no real use for the curved one.
They can also be used as a Dynavap vaporizer stand if you rotate one tool 90degrees perpendicular to the other.

With a small wood block to protect the curved tool, you should carefully be able to work the metal flat
with a small hammer....

 

[ataxian]

Thumbs , Moses!

Ask @ataxian. Glass does have a high frequency of mortality.

Which is why Grav Labs now sport a silicone jacket on some of their tasters.







PS I (still) have 3 of the Rouge Atlas OG. Crosses fingers

G.bnbb”b

Your a BALLER!
@ClearBlueLou it’s hot and very sunny were I’m at?
GREENLAND is the next dream on the PALE BLUE DOT!

 

[stark1]

As “fake global warming” accelerates, the new temperate zone will move northward, towards
Latitudes fetching Greenland, and Iceland?

Time to move. On to Alaska!

Avoid the heat? Bring water. Bring your “M”.


PS Dares gold in Dem dere calving icebergs!

 

[ataxian]

As “fake global warming” accelerates, the new temperate zone will move northward, towards
Latitudes fetching Greenland, and Iceland?

Time to move. On to Alaska!

Avoid the heat? Bring water. Bring your “M”.


PS Dares gold in Dem dere calving icebergs!

Tell that to the guy’s that live on the polar icecaps?
I know you are a science denier!

COLA’S are the goal!
“M” is great in the field’s of CANNABIS!
FAITH or FACT?

 

[RogueGuy]

@danielj love the 3d sculptures. They also work well as fidget toys/spinners.

And yah it's really f@$#&!g cold in Oregon when the sun is not out.

@thejackalsmark that was fun "brainstorming" if that's what you can call two stoners playing with stoner tools. Your stand idea was the best one!.

And yep, letter/plastic package opener. The spear tip is great for getting poppy seeds out of your teeth.

@Ramahs the scoop one is great for scratching the inside of your ear

 

[stark1]

Or inner nose?

 

[ClearBlueLou]

Cold at night? It gets chilly here before sunrise...but today I didn’t start sweating until nearly noon, so- progress!
I dig your tools, RG, def pick some up...but keeping them out of my orifices....

 

[stark1]

Greetings my fellow PHVBs [PotHeadVape Bros]

Here's my fave now.
[Someone has likely already done this?]

I hadn't gotten around to ordering an IH, then wondered if my M would fit in my rarely used FM-5.
The DV cap is too wide for the little oven of course, but you don't need a 'click' anyway. :-)

Just heat up your DV sans cap.
You can control the heat by pulling out or sliding back in [that's what she said]. The tip is a good fit.


I use the lower temp setting [385 degrees F?] and it only takes 20 or 30 seconds to heat up.


I usually brown down the herb in a session or two. I haven't burned anything at all [temp inside the tip may be lower than 385 anyway?] The battery in these things lasts quite a while.

A portable and inexpensive power supply. :-)

From some time ago, @GtrBob, a glass VapCap and a mini FM.

The VapCap fits into the heater, tip and all.

Kinda worked, but no cigar. Took forever to heat.

At the time, I had considered using it without the cap, but thought that would negate the sacred ritual
of using the cap. And the clicks.

Not kosher.

—Has it been VI years since George introduced us to the OG VapCap, and PyroVap? Howl
Father time moves on! The future is NOW?

Almost Halloween again. the VapCap still produces astounding magic.

 

[danielj]

The Inside Tool #2 - Condenser/Airport Tool


is ready for release.

I will get sonething up on it today. Id like to do a video on my ipad. Any suggs on how to upload it to FC. thanks danielj

 

[lookhigh]

Who else knew a og glass cap works in the IH.
Great taste.

 

[Vaporooni]

Just found out by accident that the Robusto can take a fall on a ceramic tile floor from about four feet. I seen it hit the floor and bounce a few times. Not even a chip or a scratch on it. Built to last. Thanks @RogueGuy.

 

[stark1]

The Inside Tool #2 - Condenser/Airport Tool


is ready for release.

I will get sonething up on it today. Id like to do a video on my ipad. Any suggs on how to upload it to FC. thanks danielj

Like some, my primary sense is visual (smAll brain casing). Please post pictures of your tool.

 

[Mr. Me2]

Please post pictures of your tool.

That just sounds wrong. And we know you did it on purpose!

 

[danielj]

 

[Xclerk]

Got a ton of back reading to do been busy but occasionally peek in. @danielj New inside tool looks cool. I'm sure I'll need to get one soon. Didnt have time to look too much as im on the road. Lol. Anyone check out the futo vapestation giveaway on reddit. Gotta get my hands on one maybe this is my chance. Hope more people hop in on this. https://www.reddit.com/r/FUTODUGOUTS
Anybody have one and know if a TRWW fits would be the perfect travel setup.
Speaking of which had my TRWW 2mmxl fall from my seat of my truck to the curb no break. I dropped it a few times didnt didnt it would take a hit on concrete tho. Not even a nice or scratch. Keep em coming @RogueGuy. Gotta run. Back to work. Have afford to pay for all these vapes and filling somehow. Everyone have a great weekend. Stay toasty

 

[danielj]

my apologies on the visual quality on my IST tool Everything looked sharp until the jpeg went thru the picture host. Will be happy to repost pics orcanswer wuestions

also my thanks to the forum member and custoner whose hints helped me explore what has become this new tool. He will be gettingva free tool.

 

[GtrBob]

At the time, I had considered using it without the cap, but thought that would negate the sacred ritual
of using the cap. And the clicks.

Not kosher.

Yeah, I was hoping I wouldn't appear too irreverent.
'The emperor has no cap.'
But it works so well for me mit-out der kliks.
No burning so far, it maintains the tip/herb at the exact right temp for extraction [imo].

PS, yr silver one looks great above; even more compact.

 

[RogueGuy]

Yo @Xclerk, thanks for the pm. It was appreciated. @Vaporooni Love hearing about dropped stems not broken.​

@danielj, awesome new tool. Super useful and simple with the depth markers on the outside. You still got my address, hint, hint

 

[stark1]

Yeah, I was hoping I wouldn't appear too irreverent.
'The emperor has no cap.'
But it works so well for me mit-out der kliks.
No burning so far, it maintains the tip/herb at the exact right temp for extraction [imo].

PS, yr silver one looks great above; even more compact.

Bob-Oh! Broh

Iffin you think the Mini is small, this works for the curious. Like me!

Just a smidgin smaller. Accommodates tip & all.

Clicks, and all.

The big attraction?

......... Windproof. Let it Blow.
...........................................Let it blow! . Compact af.




G.bnbb”b

 

[RogueGuy]

@stark1 what atomizer is that?