Crafty/Crafty+ by Storz & Bickel

Joaon

Joaon

Well-Known Member
GEyQ0Qa.jpg


Is somebody having same problem with capsules ? Not very convenient ..




3 hours of use, still hit like a train !
I've soldered the heater element to the board, it doesn't affect warmup time, still 1:30 min ( 20°C -> 180°C)


Mostly using it from 140°C - 157°C (morning), to 177°C (afternoon), until 195°C (evening)
according to this charts:

zRNQA4p.png


cannabinoides-médecine.jpg


Cannabinoids.jpg
 
Last edited:
Chandler

Chandler

Well-Known Member
sGt1oERzfbhHb_eD3U5hbT6Np43bzZlGxvlL18gWxOsh7f1AfdkjDjmWODAET_FvSe3_u069YGBrBWZd4SY6vMGVHS3nFrzJM6mj8UfIgtyWnQsprv3-CKsBtKbhdW-5i-_MlULXpc2H4U0JoaI=s0-d-e1-ft


For anybody interested, Torontovaporizer.ca is having a blowout thanksgiving sale. this is the cheapest i've seen the crafty for since 2 years ago when i purchased mine!! $379 CAD would equal approximately $285 USD!!!
oNopx72s-Mhb55MDbLUbbNpg62rC3N0MPZIhYiwHLVltxezqNejGraJ04cCd1SdY6PrhjSAc3zmDOW5mLylexsUWeYCThknHLaIJ97wJLmGtd_eBTvoaoHV9gQTGFDR9UyJthy3VE-J6Ie1bV3U=s0-d-e1-ft

$439 CAD = approx. $330 USD

Thanksgiving sale. should end monday i believe
 
vapviking

vapviking

Old & In the Way
Joaon said:
Yep, there is a little bit of material that pass through the lid. Capsule is well closed.
Depend how I grind & inhale, I know.
Click to expand...
A little bit of fine material can pass thru the screen. The mess in your photo could not possibly have escaped thru the small holes in the capsule. And when the cu cover is on (with both cu and chamber screens in place), there's not enough room for the capsule lid to open much at all.
Is the capsule lid fitting snug (tighlty) when you press it onto the cap after filling? All of mine find a gripping point and get on even tighter than necessary if I push too hard! I can't see how this problem is happening -- is it multiple times?

I like the charts, by the way, thank you.
 
Thcgos

Thcgos

Vape Addict
Joaon said:
GEyQ0Qa.jpg


Is somebody having same problem with capsules ?
Click to expand...

Nope never had that problem.

As others have already said... How is it even possible the bigger chunks got through the holes? :hmm::lol:

I find that completely filling up the dosing capsules (filled to the top with a very light tamping to fit everything firmly inside) results in everything being held in place. Not even finer particles escape when I pack it like this.

Don't over pack it though; As i said, very light tamping to push everything in.

If you dont want to fill a full dosing capsule, buy some s&b DC liquid pads or screens to hold down a smaller load.
 
Joaon

Joaon

Well-Known Member
Yep, the capsule lid is well closed, it happens with light filled capsules (micro dosing).
When I grind fine, most of it ends on the CU screen. Coarse grind, strong inhale; and it's all over the chamber.
@Thcgos Yep, no problem with full filled capsules, but .. :zzz: :haw:


Dosing capsules with liquid pad still have enough place for a little bit of herb? :)

Actually searching what to buy for micro dosing on the go, outside, hiking, at job ..
Capsules & Magazine seems okay, but not enough sneaky for me :ninja:
Caddy (or keychain pill holder) is much better, but how do you isolate Abv from fresh herb ?


Thanks buddies :leaf:

:peace:


Edit: Arg, just discovering the Dynavap Vapcap thread, Vas is back ..
 
Last edited:
MinnBobber

MinnBobber

Well-Known Member
Joaon said:
Coarse grind, strong inhale; and it's all over the chamber.
Click to expand...
..............................................
That seems physically impossible to get those big chunks escaping???
Is the lid sucked up off the sealed position or what??

You could try a dosing capsule, top and bottom, with a single fine screen on top of the herb as another barrier. If you have bigger screens, they are easy to cut down with a scissors.
I don't like the liquid pad on top of the herb!
 
ChooChooCharlie

ChooChooCharlie

Well-Known Member
Joaon said:
Dosing capsules with liquid pad still have enough place for a little bit of herb? :)
Actually searching what to buy for micro dosing on the go, outside, hiking, at job ..
Click to expand...

I suggest honeycomb glass screens as spacers for partially filled capsules. Easy and effective. These screens are not cheap, however, at $1 each, from ebay or amazon. Picture and more of my babbling here:
http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-327#post-1008660

Joaon said:
Capsules & Magazine seems okay, but not enough sneaky for me :ninja:
Caddy (or keychain pill holder) is much better, but how do you isolate Abv from fresh herb ?
Click to expand...

@Ratchett makes an alternative to either version of S&B's capsule holders. Both of the S&B holders have a removable cap, a bad idea on the go, while Ratchett's sleeve does not. Identifying spent ABV capsules from fresh is another issue -- can insert spent capsules upside down in his sleeve. Odor and herb leakage is also prevented as the capsule holes are covered. Probably could drop them in water.
http://delta3dstudios.com/s-b-dosing-capsule-sleeve-4x1/

Joaon said:
Arg, just discovering the Dynavap Vapcap thread, Vas is back ..
Click to expand...

As for portable micro dosing on the go, if you don't mind butane torches, that Vapcap, or other butane portables would be an option. But don't forget the Milaana or Grasshopper. I just ordered a cool hopper "feeder," a tool for loading the GH neatly, all the way from Israel, so won't see it for a few weeks. Next best thing to preloaded capsules.
 
Thcgos

Thcgos

Vape Addict
Joaon said:
Yep, the capsule lid is well closed, it happens with light filled capsules (micro dosing).
When I grind fine, most of it ends on the CU screen. Coarse grind, strong inhale; and it's all over the chamber.
@Thcgos Yep, no problem with full filled capsules, but .. :zzz: :haw:


Dosing capsules with liquid pad still have enough place for a little bit of herb? :)

Actually searching what to buy for micro dosing on the go, outside, hiking, at job ..
Capsules & Magazine seems okay, but not enough sneaky for me :ninja:
Caddy (or keychain pill holder) is much better, but how do you isolate Abv from fresh herb ?


Thanks buddies :leaf:

:peace:


Edit: Arg, just discovering the Dynavap Vapcap thread, Vas is back ..
Click to expand...

Thought that was the case. I too am a micro-doser ;).

When you micro dose, you have to secure the load down.
You can use a screen or the liquid pad as I mentioned eariler.

With the liquid pad I can still fill it about 1/3 full, easily. Maybe more if I push it :worms:

I use the following system... I let them cool down, then I insert them back into my container the other way arround, so I know upside down is used, right way up is unused.
 
ligi

ligi

ligi
How long did it take for you from sending in the device to getting it back? I was sending it in ( domestic ) last Friday and have no status-update yet :-(
 
ligi,
jimmbo

jimmbo

Member
ligi said:
How long did it take for you from sending in the device to getting it back? I was sending it in ( domestic ) last Friday and have no status-update yet :-(
Click to expand...
I'd say it took me about a week and a half to get my device back. I didn't get any status update till it was being shipped back to me.
 
jimmbo,
K

Kasish

Well-Known Member
t-dub said:
There is absolutely NO evidence S&B is coming out with anything new. The fact that it took them so long to produce what we have now should be evidence that nothing is going to change anytime soon.
Click to expand...
If they build it we will come :-). (granted the price is not mad)
 
CRvapes

CRvapes

Member
My evidence is that being almost 2017.
We have tons of new portable vaporizers being manufactured. Im sure the competition is not too far off from producing a similar performing crafty/mighty vaporizer at a fraction of the cost.


We now have a new Pax, CFV & tons of others coming out. I would assume S&B would want to continue selling as I've personally have not replaced my lost crafty waiting for something else to pop up.
 
CRvapes,
  • Like
Reactions: Thcgos
Mr. Me2

Mr. Me2

Well-Known Member
CRvapes said:
My evidence is that being almost 2017.
We have tons of new portable vaporizers being manufactured. Im sure the competition is not too far off from producing a similar performing crafty/mighty vaporizer at a fraction of the cost.


We now have a new Pax, CFV & tons of others coming out. I would assume S&B would want to continue selling as I've personally have not replaced my lost crafty waiting for something else to pop up.
Click to expand...
Eg, see Flowermate Swift Pro and Boundless CFV...
 
Mr. Me2,
  • Like
Reactions: Thcgos
vapviking

vapviking

Old & In the Way
CRvapes said:
My evidence is that being almost 2017.
We have tons of new portable vaporizers being manufactured. Im sure the competition is not too far off from producing a similar performing crafty/mighty vaporizer at a fraction of the cost.


We now have a new Pax, CFV & tons of others coming out. I would assume S&B would want to continue selling as I've personally have not replaced my lost crafty waiting for something else to pop up.
Click to expand...
S&B didn't scrap the Volcano when other desktops came on to the market, though they have made incremental improvements. This is the evidence, the history.
It also seems their business model does not rely on chasing prices dictated by other products. They enjoy a prominent, respectable place in the market, one of the first companies to get medical certifications and get into that very real 'niche'.
I do think that someday some of the dreams will come true; replaceable battery, stronger case, whatever, but I don't agree that big change is that obviously imminent
 
You must log in or register to reply here.
Top Bottom