Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I thought yours was a little smaller though? Maybe not, they're not too big these 14s
Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
I thought yours was a little smaller though? Maybe not, they're not too big these 14s
redrum891
Well-Known Member
** edit, i actually read it the title that is triple straight and the other is 1 straight, but perc gaps are different than dhgate one i got **
the one I ordered from dhgate has the fab very close to the perc, i know i talk about troy a lot, he has two, one that is like mine then a 2nd that has a big gap between the perc..
the new one has them in 3 different fab eggs? the connecting part seems to make the air pathway go through smaller pathways to each fab layer? sorry idk if im even making sense ; ;
is there a reason for that gap and pro's / cons of it? should water levels be super low on the low gap perc or both should it touch the fab egg inside?
stil waiting for my mouthpiece from dhgate, i saw another site with a real nice mouthpiece I should have gotten instead for my TFP klein recycler with FOL perc, it works well. i'll see how it does when my piece comes in.
Bong Mouthpiece Adapters from Aqua Lab Technologies
Elevate your sessions with Aqua Lab's Bong Mouthpiece Adapter. Ergonomic design fits 14mm & 18mm joints. Crafted in California for a premium experience.
Last edited:
Abele Rizieri Ferrari
Well-Known Member
They're both 8". They're the same piece, but the product photos of my non sandblasted version are dated. My actual piece has the mp and joint in the style of the sandblasted one.
condition
Well-Known Member
I think we miss a very basic thread in this sub-forum, one that will explain differences between bubbler with or without percolator, including for example, inline perc vs recycler etc.
Most vendors list them, have very limited, basic info, that doesn't help to choose your next step
Most vendors list them, have very limited, basic info, that doesn't help to choose your next step
redrum891
Well-Known Member
I think maybe there should be an expert who has a lot of vapes that could give a top 3 list of glass for most popular vapes and reasoning why.
I have learned a very little bit, like my volcano with air pump on through a small bubbler will push out air that is not hot at all. I see why some people just use glass stems for lower temp vapes, then diffusion types and how it effects flavor. I'm not sure how "X" device at 660F with a j-hook would be, but I assume a bubbler would be better for that, i've seen low temp j-hook hits but lower temps for flavor.
idk, i know high thc herb will be able to make a mighty / tinymight will pump out nice clouds while someone who lives in a non medical state with no access to good herb, probably 13%~ thc that requires me to use more. Sucks
... imagine vaping too much and getting a headache. Still tempted to switch back to smoking for now but my father has been through a lot and I don't want him smoking, so I vape too.
RustyOldNail
SEARCH for the treasure...
The “issue”, with this thread or all the others that reference water rigs, is in the end only each individual can determine what works best for them. @Shit Snacks has gone above and beyond in his help and reviews and pictures, but in the end you have to buy and try. What works best for him, or anyone else may not be the best choice for you.
I have found what works best for me and the devices I use, and bought a fair amount of both inexpensive and a few more expensive glass rigs, that fine tuned what my requirements are. I will eventually sell my unused rigs, as they might be exactly what someone else needs or wants to try. Buying vape devices is much easier in my opinion, but glass rigs are tricky.
I’ll leave you with this… buying water rigs is similar to buying a nice fitting pair of shoes/sneakers, trying them on is key, unfortunately for most, there is no way to try water rigs. You can only learn so much from others experiences with water rigs, before you actually get to use them….
Timps27
Feel like I’m winnin’ when I’m losin’ again
As I’ve said in other places (and I’m sure many before me, by no means an original idea), glass truly is an instrument, and each combination of device, attachments, draw speed, perc style, can volume, and on and on and on, tunes the experience slightly. As the vast majority of tuning your combinations is unique to your own ritual/style/goal, there is no way any one person could provide any true insight.
That’s why I always get encouraged when an abundance of posters chime in, GAS should be considered a longer form engagement than VAS IMO. Take it slow, buy some cheap pieces here first to experiment and learn what works for you, then and only then start engaging your GAS!
That’s why I always get encouraged when an abundance of posters chime in, GAS should be considered a longer form engagement than VAS IMO. Take it slow, buy some cheap pieces here first to experiment and learn what works for you, then and only then start engaging your GAS!
RustyOldNail
SEARCH for the treasure...
WELL SAID!
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yes, they are all different!
Again, that one you just got, GiliGlass, is not the one Troy has, fairly certain he has two FOLs... GG version is much newer and his are older... And the gap between the perc is totally random pretty literally piece to piece from same maker
Yes, that is what I described, three smaller straight fabs, separated by the four pillar columns, making it a pillar column recycler as well...
That one probably would be better with more water, and has more draw restriction, but it is similar, because the egg itself is like sideways pillar columns, and there is no should, depends what you want... More water means more recycling and water going through the egg or pillars, less means just that less, more like a bubbler with an obstructed dry path, you get that fully if you use it dry without any water as well... So depending on the location of the egg and perc your options for how much water and the type of function I described above change.
Yes, these pieces are different, from different makers, and they have a variety of differences, pros and cons or trade-offs, which is why I justified grabbing the GG since it is about half the price or less of the CB although I prefer the CB ultimately...
stil waiting for my mouthpiece from dhgate, i saw another site with a real nice mouthpiece I should have gotten instead for my TFP klein recycler with FOL perc, it works well. i'll see how it does when my piece comes in.
Bong Mouthpiece Adapters from Aqua Lab Technologies
Elevate your sessions with Aqua Lab's Bong Mouthpiece Adapter. Ergonomic design fits 14mm & 18mm joints. Crafted in California for a premium experience.aqualabtechnologies.com
I have that mouthpiece, RBT cut it down for me to fit his vapes way back when and made me some custom rimmed basket screens, I never use it anymore though, the mouthpiece is a little weird but it's comfortable enough, decent bent shape, was a good price too... Like I said before, there are a lot of options for these mouthpieces now especially from a variety of places
Well old threads get buried without activity, there are a lot of questions about stuff like this in the glass section and ask FC section... And yes I have explained different perc styles and orientations compared to recyclers several times in several places lol the nature of FC?
I'm not sure what you mean by a bubbler without a perc though, the perc is doing the bubbling, if there are no holes or slits or whatever for diffusion, then it is just open natural perc is all (meaning full chug especially if it is a recycler but minimal diffusion) there are a lot of different styles and shapes, between bubblers bongs recyclers so yeah it's pretty impossible to be comprehensive honestly, while different manufacturers and sellers refer to them differently so pretty impossible to actually track?
I think maybe there should be an expert who has a lot of vapes that could give a top 3 list of glass for most popular vapes and reasoning why.
I have learned a very little bit, like my volcano with air pump on through a small bubbler will push out air that is not hot at all. I see why some people just use glass stems for lower temp vapes, then diffusion types and how it effects flavor. I'm not sure how "X" device at 660F with a j-hook would be, but I assume a bubbler would be better for that, i've seen low temp j-hook hits but lower temps for flavor.
idk, i know high thc herb will be able to make a mighty / tinymight will pump out nice clouds while someone who lives in a non medical state with no access to good herb, probably 13%~ thc that requires me to use more. Sucks
As Rusty and Timps already said so well, this is simply impossible, it is entirely subjective and there are entirely too many variables...
I thought 'as well' could replace 'instead' quite easily!
Go on, you deserve it.
I always budget 2 months for deliveries from China (DHGate, AliExpress etc) so if it only takes 6 weeks, I call that a bonus.
Abele Rizieri Ferrari
Well-Known Member
The honeycomb doesn't get optimal function without an inline, because the vapor will only pass part of the perc. I imagine the triple honeycomb correct a bit of that, but I'd prefer a inline to (single) honeycomb myselfany thoughts on this ? £40 from vapefiend
feralcomprehension
Qualified Observer
I have a TAG double honeycomb and think what I really want is an inline to honeycomb like you are describing....veeery tough to find ime. Post up if you find one or find a maker willing to make a couple for not huge money.
Timps27
Feel like I’m winnin’ when I’m losin’ again
The Buzz Honeycomb Percolator
The Buzz features a honeycomb percolator for maximum bubble production. The filtration this device achieves is massive, don't let its sleek size fool you.
condition
Well-Known Member
@Shit Snacks i understand, so i am after a recycler bong with open downstem and filter only with the water. Not incycler/bubbler and from dhgate preferably
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
any thoughts on this ? £40 from vapefiend
Yeah as was said I do not care for natural perk to honeycomb for vaping, and I think stacking honeycomb discs is pretty pointless for vaping as well, this is a nice big piece, nice it has a bent neck, decent price... There's another thread where someone was asking for a multi-honeycomb bent neck piece, so there were several shared there, on DHgate and eBay and elsewhere, that you might like alternatively if you do want to grab a piece like this despite our opinions?
Yeah they are hard to find but several were found and shared here recently, like the one above, and more of it from other sellers, also some other versions like straight neck pieces on DHgate we've shared here before if you search, one had swiss holes too
When you say bong, do you mean a tall tube recycler? Like from Biao? Because all of those have gridded inline percs, never seen any with open down stem though you could ask for a custom... Or did you just mean you want a natural perc open down stems regular recycler rig?... You said not bubbler, so yeah if you want to recycler bong like that I think custom is your only option...
condition
Well-Known Member
I understand. I do not wish a custom made option, I prefer a small recycler with low (lowest) restriction, from DHGate in order to avoid customs clearance, handling fees and to pay less in purchase price.
Abele Rizieri Ferrari
Well-Known Member
I think that natural perc which you are after, in spite of being physically open, will give a more restricted experience. Some diffusion will make it a smoother route for the vapor traversing that recycling path.
redrum891
Well-Known Member
Green glass hookah bubbler 18mm connector.. | Wish
Buy Green glass hookah bubbler 18mm connector.. at Wish | Shop and Save
www.wish.com
? this, also says 18mm too lol
if it recycles good and 18mm, i might grab one. lmk if this is what you are talking about.
Last edited:
condition
Well-Known Member
I was also looking for this recycler from dhgate
found here https://www.dhgate.com/product/hookahs-opal-14-mm-joint-recycle-secret-white/753305738.html?
Price is on the very expensive side but looks very neat. The seller is Mlglass
What do you think of it?
found here https://www.dhgate.com/product/hookahs-opal-14-mm-joint-recycle-secret-white/753305738.html?
Price is on the very expensive side but looks very neat. The seller is Mlglass
What do you think of it?
Nice find.Green glass hookah bubbler 18mm connector.. | Wish
Buy Green glass hookah bubbler 18mm connector.. at Wish | Shop and Save
? this, also says 18mm too lol
if it recycles good and 18mm, i might grab one. lmk if this is what you are talking about.
Ramahs
Fucking Combustion (mostly) Since February 2017
I was also looking for this recycler from dhgate
found here https://www.dhgate.com/product/hookahs-opal-14-mm-joint-recycle-secret-white/753305738.html?
Price is on the very expensive side but looks very neat. The seller is Mlglass
What do you think of it?
First thing I think when I see a piece like that is that it's gonna fall over once I get the weight of a dropdown and banger on it...and even more-so if I add a coil to heat the banger.
I always want pieces with wider bases than that.
Abele Rizieri Ferrari
Well-Known Member
I think they also have a cheaper version of that without the opals.I was also looking for this recycler from dhgate
found here https://www.dhgate.com/product/hookahs-opal-14-mm-joint-recycle-secret-white/753305738.html?
Price is on the very expensive side but looks very neat. The seller is Mlglass
What do you think of it?
Nice find.
I think there is more affordable pieces out there that are at least as adequate. That store also stocks some other pieces for better price.
I use this dual uptake myself (from another store): https://m.dhgate.com/product/dpgwp035-7-9-inch-clear-recycler-glass-water/776459092.html
I made a function video before
But ime these sort of pieces need a strong heater to function, I found Anvil for example couldn't hold up.
condition
Well-Known Member
I understand, thanks. I maybe abstain from buying a recycler water pipe, as I do use only portables atm.
Abele Rizieri Ferrari
Well-Known Member
The incycler style recyclers work well with dry herb portables like TM and Anvil, but the vortex function is harder to achieve with this design.
condition
Well-Known Member
Thanks is this considered an incycler? As I received it past week and I am not so familiar with glass pipes
