Oops!The one they posted is not an incycler
The worst thing about incyclers is what a pain they are to clean,
Oops!The one they posted is not an incycler
Fat vertical downstem, big airy perc (matrix, etc). I've retired a megaglobe, D020, and GG barrel perc. I do use a valve where it's worthwhile, but I don't bother anymore with a piece where blowback's inherent. Got tired of sweeping up debris.Is there a clear indicator that a piece is going to suffer from blowback? Both of my DHGate bubblers have it.
guessing the more water used to pull through the glass bowl part, if it is high the more water to go back to normal levels from being pulled on will cause the air from the water moving back to normal to push your herb back.Is there a clear indicator that a piece is going to suffer from blowback? Both of my DHGate bubblers have it.
Is there a clear indicator that a piece is going to suffer from blowback? Both of my DHGate bubblers have it.
This won't affect the part that causes the blowback, so I'm afraid it won't help.Is the issue improved at all when you use one of these?
I'd imagine it would work better if the angled joint was bigger tho.
What CB said, stay away from dewar down stem and matrix perc style
this would work if you keep the carb cap off before releasing the pull, all exess air will go out the carb cap and not hit your herb, blowing it out the carb cap, might not cause the herb to even move much if not tamped, but with barley any tamp it should hold down easily with that setupIs the issue improved at all when you use one of these?
I'd imagine it would work better if the angled joint was bigger tho.
Thé vortex helps cool the vapor. If you don't get the vortex, it is indeed basically an intricate splash guard. I can imagine if you use it with less water the flavor will be good, but the trade off is the loss of function/cooling. In this case, if you don't need the cooling, a different piece would have my preference, that is designed to be used with little water.the vortex from high water levels doesn't filter or give any benefit to any vapor/smoke?....it's just basically an enhanced splash guard? Mine with barely any water gives nice small little bubble percs while filling it up high will give huge bubbles that I can pull in hard but way less flavor that way.
i grabbed that 1 dhgate, troy knockoff looking bong. looks to have a huge fab egg in the middle and 18mm. looked decent.Thé vortex helps cool the vapor. If you don't get the vortex, it is indeed basically an intricate splash guard. I can imagine if you use it with less water the flavor will be good, but the trade off is the loss of function/cooling. In this case, if you don't need the cooling, a different piece would have my preference, that is designed to be used with little water.
Maybe it is my imagination but I have found that I can manage blowback with good timing on pulling the carb plug. Also I keep the water level pretty low.Is the issue improved at all when you use one of these?
I'd imagine it would work better if the angled joint was bigger tho.
Which one is it?i grabbed that 1 dhgate, troy knockoff looking bong. looks to have a huge fab egg in the middle and 18mm. looked decent.
I don't know what you're exactly after and what vape you plan on pairing it with the most, but fwiww Inteally enjoy white walling this piece https://calibearglass.com/collections/water-pipe/products/natty-flower-bongNot sure which piece to even grab for milky hard hits.
You're right, those usually do the trick. I just get stoned and forget, apparently, a lot more often than I have patience for! For some reason it's easy to use one with the intent to clear the chamber, while the intent to mitigate blowback runs smack up against a head full of vapors!Maybe it is my imagination but I have found that I can manage blowback with good timing on pulling the carb plug. Also I keep the water level pretty low.
Deeply relatable experience.You're right, those usually do the trick. I just get stoned and forget, apparently a lot more often than I have patience for! For some reason it's easy to use one with the intent to clear the chamber, while the intent to mitigate blowback runs smack up against a head full of vapors!
Thanks I am reading through this thread now, hope it won't confused me more.And don't know if you spotted this thread already but might also be worth a look: https://fuckcombustion.com/threads/...tional-water-pieces.52314/page-2#post-1696004
This looks very neat.I don't know what you're exactly after and what vape you plan on pairing it with the most, but fwiww Inteally enjoy white walling this piece https://calibearglass.com/collections/water-pipe/products/natty-flower-bong
Free international shipping with CaliBear and o only had to pay 7€ for customs (6€ of that was administrative fee). With the 30% discount code it is quite a good price. Shipping from TAG is high, I added the TAG klein incycler I posted above to a pre-order I have with them to combine shipping cost. It might also be worth it to inform with sellers if they can lower the amount declared to customs, so your extra costs won't be as high.Thanks I am reading through this thread now, hope it won't confused me more.
This looks very neat.
I also found some very attractive bubblers at TAG, but the shipping costs are too high and shipping costs are taxed also here.
You make me want a log vape.Free international shipping with CaliBear and o only had to pay 7€ for customs (6€ of that was administrative fee). With the 30% discount code it is quite a good price. Shipping from TAG is high, I added the TAG klein incycler I posted above to a pre-order I have with them to combine shipping cost. It might also be worth it to inform with sellers if they can lower the amount declared to customs, so your extra costs won't be as high.
@condition heres a function video of that piece:
CouchLog has been such a treat!You make me want a log vape.
What's your favourite recycler then?but honestly I hardly ever use them, prefer other rigs and recyclers
Still one of my favorite pieces. I'm not a huge fan of restrictive draws generally but this hits my sweet spot. Think this still gives me milkier, denser hits than anything else I own. (Other favorite is recently arrived Rick Bird Barry scalloped Milkball but that's a pricepoint ($250) outside the parameters of this thread).I received today, Sunday!, a Grav Upline Upright Bubbler copy from DHGate. I like it very much but it also needs to draw aggressively. It took in total 3 weeks to EU. This is the original, but it is highly recognizable.
What's your favourite recycler then?
anyone can/should check your post to find tons of information / glass pieces .Yes more restriction in a piece typically means better "milking" although typically another piece is not hurting the density of vapor, you are just inhaling more of it instead of showing it off in the piece...
I think I said, that I like the single uptake klein style, where it is separate piece, I have posted so many here, I mentioned in another thread just now that my favorite for herbs is not even available anywhere anymore...
Free international shipping with CaliBear and o only had to pay 7€ for customs (6€ of that was administrative fee). With the 30% discount code it is quite a good price. Shipping from TAG is high, I added the TAG klein incycler I posted above to a pre-order I have with them to combine shipping cost. It might also be worth it to inform with sellers if they can lower the amount declared to customs, so your extra costs won't be as high.
@condition heres a function video of that piece:
Yeah I noticed that as well.interestingly, the photos for it, list photos of yellow and green accented versions, that have different downstem
I have that without the sandblasting. Was 80 before discount I believe. Very happy with my purchase.This seems like a good value though: