Ripstar
Well-Known Member
That's it! Plan on using it dry as almost a jhook.
-
SCAM WARNING! See how this scam works in Classifieds.
Tetra P80
- Thread starter funkyjunky
- Start date
Would love some pics, contemplating a similiar build
MonkeyTime
Well-Known Member
So, she's been home for about 2 weeks now and it was a worthy upgrade from both the Tetra and Tetra-X. Very happy I went with the drum end, it fits in the hand great.
And this is how you cap a long week. I've been using doob tubes for some time and every once in a while the kief collects in one place and makes me a little puck. I treat it like hash and heat it, break it up and vape it! This one put me over the top!
I never had a lot of success with the SB capsule stem with the Tetra, but I'm having a great time of it with the P80. Not sure if it's a different airflow or just the additional wattage because of the heater, but a warmup and cruise at 400F has spent the capsules pretty well. It collects reclaim like crazy, so I'm playing with different filters as I play with grinds and packs.
To date, its been used the most with my Hubba Bubble HT, a Vigreux stem or the capsule stem. If I have time this weekend I would like to try really pushing it hard thru water just for the fun of it!
And this is how you cap a long week. I've been using doob tubes for some time and every once in a while the kief collects in one place and makes me a little puck. I treat it like hash and heat it, break it up and vape it! This one put me over the top!
I never had a lot of success with the SB capsule stem with the Tetra, but I'm having a great time of it with the P80. Not sure if it's a different airflow or just the additional wattage because of the heater, but a warmup and cruise at 400F has spent the capsules pretty well. It collects reclaim like crazy, so I'm playing with different filters as I play with grinds and packs.
To date, its been used the most with my Hubba Bubble HT, a Vigreux stem or the capsule stem. If I have time this weekend I would like to try really pushing it hard thru water just for the fun of it!
SonicBacon
Well-Known Member
That looks very nice. Can you tell me what wood that is?So, she's been home for about 2 weeks now and it was a worthy upgrade from both the Tetra and Tetra-X. Very happy I went with the drum end, it fits in the hand great.
And this is how you cap a long week. I've been using doob tubes for some time and every once in a while the kief collects in one place and makes me a little puck. I treat it like hash and heat it, break it up and vape it! This one put me over the top!
I never had a lot of success with the SB capsule stem with the Tetra, but I'm having a great time of it with the P80. Not sure if it's a different airflow or just the additional wattage because of the heater, but a warmup and cruise at 400F has spent the capsules pretty well. It collects reclaim like crazy, so I'm playing with different filters as I play with grinds and packs.
To date, its been used the most with my Hubba Bubble HT, a Vigreux stem or the capsule stem. If I have time this weekend I would like to try really pushing it hard thru water just for the fun of it!
cheers.
MonkeyTime
Well-Known Member
That's the old Burma teak, it's got a lovely feel to it.
Chicken No Name
Dazed and confused
@MonkeyTime
That's really nice... I had convinced myself only yesterday that I would NOT be purchasing a tetra p80 as I genuinely have no real need for it.
I went to sleep last night comfortable with my decision, even a little smug.
But first thing this morning and I see this beauty.
So another day to be spent wrestling with the dilemma again.
Buy another vape or feed the kids....?
That's really nice... I had convinced myself only yesterday that I would NOT be purchasing a tetra p80 as I genuinely have no real need for it.
I went to sleep last night comfortable with my decision, even a little smug.
But first thing this morning and I see this beauty.
So another day to be spent wrestling with the dilemma again.
Buy another vape or feed the kids....?
MonkeyTime
Well-Known Member
I don't want to push you one way or the other, but I always found my kids to be very resilient
I held off from a P80 for a long time, the toughest part was the early days when everyone was comparing it to tetra's. I thought I was safe, but my VAS was only in remission, not cured.
I'm really glad I gave in, it's a joy to use!
Ripstar
Well-Known Member
Ramahs
Fucking Combustion (mostly) Since February 2017
It's been a while since I posted a pic of my baby. Everyday I use it I'm still amazed with the flame on this lacewood. When using my P-80 I really do feel privileged.
Damn. Protopipes. That's old school.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Comparison of the artisan vapes!
In your honest opinion how does the P80 compare to the FW7 and what about the Milaan 2 compared to the P80 and FW7? I'm getting a few new vapes so I'd like to know the pros and cons of each device. Thanks much
fuckcombustion.com
This is a post for ask FC, we don't really do head-to-head comparisons and specific product threads, welcome though!
They aren't really so comparable, despite the similarities Milaana is unregulated analog and TetraP80 is digital regulated...
Looking to Collect/Purchase a List of Best On Demand Vaporizers
If money was not an issue, which are the best vaporizers on the market today? Areas for consideration includes but not limited to: Potency, Vapor Quality, Draw Resistance, Efficiency, Ease of Cleaning, Ease of Setup/ Use, Battery Life (if portable), Safety I already own a Mighty, Volcano and...
fuckcombustion.com
VAS kicking in: Looking for a new, affordable wooden vape
Hey guys, Well maybe calling it VAS was a bit over the top as I could hold myself back in the last few months/years. May last vape acquisition was a while ago. I currently own two Vapcaps, a Fury, Solo 2 and a tubo evic. That's all. Only 4 different kind of vaporizers. My favorites of my...
fuckcombustion.com
These threads discuss a lot more other products, and there are other threads comparing, Milaana is in a lot of them, as is the Tetra, so you can skim through searching and browsing for what you're looking for...
Or you can start a new thread in Ask FC Milaana vs Tetra, but yeah they are pretty different, just general researching them, skimming this thread and the Milaana thread, should reveal which one is more appealing to you and your needs??
Thank you.
GoldenBud
Well-Known Member
milaana = wattage mode only, no TC control
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
SonicBacon
Well-Known Member
I recently ordered a stem and it arrived in the mail (in BC) with no extra fees. Shipping time was around 8 days iirc.
JoJolion
Member
acstorfer
Take My Money Dammit!
The above link is from a movie called Heaven Can Wait. I'm pretty sure it was a remake, and starred Warren Beaty. The scene shows the ex owner of the LA Rams and how he was "forced" to sell.
Anyway, have y'all seen what's been going on with Reddit? The last two P-80s sold for $450.00 and $475.00. Two people who wanted to buy flat out said they will pay hundreds over price. What if someone asked to buy my P-80, I asked for something outrageous like $1,000.00 (I do have 5 glass stems and a medium ebony/lacewood stem after all), and they said yes.
THAT RUTHLESS BASTARD!
Anuiel
Well-Known Member
Damn that's lame.
Seems like this is just what you'll end up with working with a drop system like he does with very limited availability. I remember a friend once talking about how the Supreme brand employ a similar tactic and how much of their shit is for sale by flippers who just want to make some quick money and don't care about the products. Oh yeah and it was the same for limited edition Nike shoes.
Seems like this is just what you'll end up with working with a drop system like he does with very limited availability. I remember a friend once talking about how the Supreme brand employ a similar tactic and how much of their shit is for sale by flippers who just want to make some quick money and don't care about the products. Oh yeah and it was the same for limited edition Nike shoes.
acstorfer
Take My Money Dammit!
I just posted mine earlier on this page. Now I have to throw in my two cents. Go elegant. Go to town on the most beautiful wood choice you can make. Hint, the lacewood is gorgeous by the way. Maybe some Koa or Birdseye Maple for example. Then let the wood speak for itself. A gorgeous piece of wood is a timeless statement.So I’m finalizing my custom design and am getting pumped.
Would love to see some more real world
Pics of the tetra.
so for those of you who own one, throw up a pic or 2
That's what I would do, but you can most definitely go nuts! Have fun! Go with a round cut instead of the box cut.
Well a lot of what made Supreme gear and Nike dunks cool was because they were more exclusive and harder to get. They wouldn't have been as cool and unique if anyone could buy them at any time they wanted.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
So I’m finalizing my custom design and am getting pumped.
Would love to see some more real world
Pics of the tetra.
so for those of you who own one, throw up a pic or 2
Nice! If you haven't already, just skim through the thread, best way to see all the photos of all the different types since many people only post a photo once when they receive it if at all... FJ also posts a bunch of photos for each drop, you could also check Instagram search, hashtag Tetra or TetraP80
Looks amazing. I’ll post mine when it done, yours served as inspiration for part of it.