1. What does SSTB mean? See our glossary of acronyms.

Omicron Vaporizer for oils

Discussion in 'Portable Vaporizers' started by THC SCIENTIFIC, Sep 16, 2011.

  1. Caligula

    Caligula Maximus

    Messages:
    6,872
    Location:
    SB420 Land!
    Looks well saturated. Might throw a small dab on top of that.
     
  2. Chrisbkreme

    Chrisbkreme Active Member

    Messages:
    77
    Location:
    United States
    Awesome, thanks.
     
    CHIDOY likes this.
  3. havock69

    havock69 Well-Known Member

    Messages:
    139
    I load en ought to cover the coil and i always get fatty hits
     
  4. Detonator

    Detonator Well-Known Member

    Messages:
    262
    ok I been looking at the titanium KISS but I am a little confused about the ordering options.....

    I don't own any W9 gear and I want to put it on a Variable Voltage device with a 510 connector... Now I know W9 is a 601 so I will need a 510 to 601 connector.....

    and I'll want a 3.7 volt coil

    but what about the other options? Vaporizer Type? Why is there a difference? Omicron, omicron lite, O-Phos, Persi?
     
  5. HerbalHighway

    HerbalHighway New Member

    Messages:
    27
    Hi, first post here and an amazing resource! From UK sides so fairly new to concentrates but loving them!! Fully converted and have purchased a fair few products looking for the perfect one. Recently discovered UP Tech products and have to say the very best have tried so far all round! Loving the titanium kiss carts and they work equally well when don't want to take my persei out and just attach to G Pen battery for stealth. Have been non stop using a week with no degradation as of yet so one happy customer!

    I also recently purchased the Okeanos Bubbler - I'm having a few problems with it and was hoping someone could help me out or if W9Tech's website would post up some instructions?

    The problem at first was water being sucked up, then was leaking slightly and now having fixed the first two I can not get any airflow so have to toke really really hard to get anything! Smoke is definitely coming through but need olympian lungs to get it and the water doesn't really bubble like it should. Can anyone think what am doing wrong? And maybe there's a special way to fill it with water that am missing (currently screw the pole in, place water a third of the way in the tank and seal and screw on drip tip tight - if loosen drip tip can get a toke with water and if tighten then no toke at all as no air allowed thru).

    Thanks and sorry if was too detailed lol. I am gonna order the Hercules next pay cheque. Cant wait :)
     
    Caligula likes this.
  6. Caligula

    Caligula Maximus

    Messages:
    6,872
    Location:
    SB420 Land!
    Congratulations on making the switch and welcome. Id offer to help but I do not have an Okeanos. Im sure @THC SCIENTIFIC or @Sleepin in CA would be able to Trouble shoot with you.

    And yes that Hercules is 100% a smart investment if you are switching to concentrates.
     
    HerbalHighway likes this.
  7. Sleepin in CA

    Sleepin in CA Higher than a Pterodactyl, you can call me Caveman Accessory Maker

    Messages:
    760
    Location:
    California
    @HerbalHighway in the persei thread.....page 720 I have a video or two detailing how to fix/clean stuff. There is also a review/use video set on page 711 of the same forum. If you need More info.. .Please pm me or tag me as I am not active in this thread.

    As for a Hercules...it will change your life. If you can afford it, get the Nibbler XL as well. Simply amazing. My daily driver setup is the wand....Hercules sr71.......and NXL.....pure heaven.

    =)

    Edit......Links added.

    Reviews here
    http://fuckcombustion.com/threads/the-persei-vaporizer-for-herbs-and-concentrates.4873/page-711

    Fixes/troubleshooting stuff here...
    http://fuckcombustion.com/threads/the-persei-vaporizer-for-herbs-and-concentrates.4873/page-720
     
    Last edited: Feb 15, 2014
    HerbalHighway, syrupy and Caligula like this.
  8. HerbalHighway

    HerbalHighway New Member

    Messages:
    27
    Thanks so much for the help peeps! Really appreciated :) Will take a look at the vids and posts now and let you know if any questions but should be a massive help!

    Can't wait to get the hercules! Only a couple more weeks now!! I was looking at the nibbler XL and tis a beauty. My only concern is that it would appear that UPTech are moving away from that style of cart which would be a shame if spent all that money and that happened. I've really enjoyed those carts tho - really handy for when don't want to keep refilling and the two that have used so far have been working brilliantly! I hope that these carts or an improvement of them continue to be developed as real handy to have the options imo...

    I'm hopeful the concentrate scene lifts off in the EU. Strange that not even able to find easily in Amsterdam - they don't know what they missing out on! However, at least encourages me to get scientific and make my own which is great fun ;)

    Thanks again for the help and look forward to participating more in the community and being a help to others. A wealth of fantastic info here
     
  9. Chrisbkreme

    Chrisbkreme Active Member

    Messages:
    77
    Location:
    United States
    @Caligula or anyone else, I've seen a couple different answers, can I soak the titanium KISS cart in ISO to clean it, or will that mess up the coil? Thanks!
     
    Caligula likes this.
  10. Caligula

    Caligula Maximus

    Messages:
    6,872
    Location:
    SB420 Land!
    Thats how ive always cleaned mine. 99% iso soak, and I carefully use a paperclip to clear out the air holes on the side of the cart as well as to get at stuff seriously stuck inside ceramic bowl.

    After the soak I just shake out the excess iso and do a quick burn off by hitting the power.

    Also IDK if this has been fixed on the Ti carts but the ceramic bowl used to rotate if you weren't careful while digging around in there with that paperclip. I wasn't careful one day and the bowl twisted so much the heater wire broke.

    Anyway keeping my finger on the bowl would have prevented that.
     
    poonman likes this.
  11. Chrisbkreme

    Chrisbkreme Active Member

    Messages:
    77
    Location:
    United States
    Awesome, Thanks! I just didn't want to ruin the coil by submerging it.
     
    Caligula likes this.
  12. Sleepin in CA

    Sleepin in CA Higher than a Pterodactyl, you can call me Caveman Accessory Maker

    Messages:
    760
    Location:
    California
    The Nibbler XL is for the Hercules. Not a cart. The standard Nibbler is for a cart. I wouldn't advise the Nibbler.....As I don't own one. The NXL though is a must if you can afford it. Amazing flavor and nice cool rips!
     
    exile1975 and HerbalHighway like this.
  13. exile1975

    exile1975 New Member

    Messages:
    6
    I just recently got a nibbler x to use and i am in love. I've only used it with the 2.4 ohm carts but it's great with these. I would imagine it's even better with the 1.5 ohm carts. I would definitely recommend this purchase to anyone using the carts. I personally don't notice any loss of flavor but the hydration and diffusion lend a much needed break for my lungs...
     
    Sleepin in CA likes this.
  14. TommydCat

    TommydCat Well-Known Member

    Messages:
    365
    Location:
    Seattle-ish
    The Nibbler X is indeed great to have for the original carts - it greatly tempers the taste and provides great visual feedback when learning how to use them properly. As an added bonus, it just looks kick-ass.
     
    CHIDOY and Sleepin in CA like this.
  15. HerbalHighway

    HerbalHighway New Member

    Messages:
    27
    Thanks for the info! Will make the purchase at the same time as getting the Hercules. Would be criminal not to given others thoughts ;)
     
    Sleepin in CA likes this.
  16. Vicki

    Vicki The Bionic Woman

    Messages:
    5,747
    I'm getting one of these soon via a trade here with @sasNW I can't wait to try it! :nod:
     
  17. Betelgeuse

    Betelgeuse I'm the ghost with the most

    Messages:
    15
    Location:
    Elsewhere
    I call upon the guru's of vape to help me. So i've had an Omicron V2 for a while and i got the Kiss cart, then the wic broke, then i got the Ti Kiss cart, then the wic broke. Can these break from excessive heat? Other than that is just sits in my pocket. I think im being careful when loading it, but there are no witnesses to verify. <.< Maybe they are just really fragile and i should change my name to Mongo?
     
    Caligula likes this.
  18. THC SCIENTIFIC

    THC SCIENTIFIC Black Gold Manufacturer

    Messages:
    6,488
    Location:
    Los Angeles
    The ceramic rod is very fragile. Gotta be careful not to apply to much pressure.
     
  19. Betelgeuse

    Betelgeuse I'm the ghost with the most

    Messages:
    15
    Location:
    Elsewhere
    Im a sad panda. Is there a way to rebuild these, or is that just wishful thinking? I seem to remember that was a goal for the KISS at some point?
     
    StickyShisha likes this.
  20. Caligula

    Caligula Maximus

    Messages:
    6,872
    Location:
    SB420 Land!
    Did you know they were going to do a sequel to that movie called "Betelgeuse Goes To Hawaii" (or maybe it was "in Hawaii")?

    Obviously never materialized.

    Anyway, are you doing dry burns with the KISS cart? Also are you using 3.7 or 7.4v versions?
     
  21. Betelgeuse

    Betelgeuse I'm the ghost with the most

    Messages:
    15
    Location:
    Elsewhere
    Well im using the 3.7, and i burn "until" its dry, so guess the answer is yes. The heat factor crossed my mind but i figured its ceramic so no worries. Is it possible to fry the ceramic wic?
     
    Caligula likes this.
  22. Caligula

    Caligula Maximus

    Messages:
    6,872
    Location:
    SB420 Land!
    Well, rapid heating and cooling can cause thermal expansion and contraction and that an lead to cracks... however I've no idea how this relates to the ceramic wick. Id think that it doesnt help if the wicks are already fragile though. In either case W9 suggests NOT doing dry burns to help increase the life of the heater. G wasnt too clear as to why though.

    On an aside, Ive yet to break any of my wicks.
     
  23. gnjagrwr

    gnjagrwr Member

    Messages:
    42
    Im prob pick up the new titanium kiss this week..just would like to know difference in performance, taste, durability? I own the previous version and like it fine! What can i expect? Thanks.
     
  24. DieHard

    DieHard Vertical transportation specialist.

    Messages:
    1,146
    Location:
    Limbo
    From my experience the Ti KISS is a better performer. It seems to heat a little faster. When new and clean it definitely has a better taste. When it is well "seasoned" I cannot really taste any difference between the two. That just means that I prefer to keep it clean. As for durability, only time will tell. The coil is a very thin wire being exposed to many heating/cooling cycles so eventual metal fatigue and breakage are inevitable. Best to be gentle when loading and cleaning/reclaiming. That said, the Omicron with the Ti KISS is my daily driver because of the small pocket-friendly size (especially with the SS kit).
    :)
     
  25. Vicki

    Vicki The Bionic Woman

    Messages:
    5,747
    Does the Ti KISS cart work with wax/crumble? I'm getting an Omicron next week, and it's not coming with a KISS cart. I'm wondering if my wax/crumble will even work with the original Omicron cart.
     

Support FC, visit our trusted friends and sponsors