MuushuPork
Well-Known Member
I just got my replacement 710's, both balls are moving. Actually has more air flow now as the intake tubes are wider. It hits better then the last version I had for a year and a half. Hopefully Steven makes it right.
If you want cheap low cost glass?I can't tell what's going on. The vendor offered me a partial refund of a penny. I'm sure he had to do that to close out his refusal and wasn't meaning to be insulting. I offered to accept a $10 refund and he seemed to go for that, but now is saying he will send me another. It is getting confusing. I guess I will just have to wait and see how this pans out...
If he offers me a reasonable partial refund I will accept it rather than insist on a replacement as I'm willing to use the piece without the rattle but only if he makes an effort to satisfy me. It is a fucking rattlecan after all...
I can't tell what's going on. The vendor offered me a partial refund of a penny. I'm sure he had to do that to close out his refusal and wasn't meaning to be insulting. I offered to accept a $10 refund and he seemed to go for that, but now is saying he will send me another. It is getting confusing. I guess I will just have to wait and see how this pans out...
If he offers me a reasonable partial refund I will accept it rather than insist on a replacement as I'm willing to use the piece without the rattle but only if he makes an effort to satisfy me. It is a fucking rattlecan after all...
Hmmm...PopularGlass has really been letting people down lately it seems. My buddy had the problem I saw others were having when I was catching up on a few pages back with the weirdly blown intakes on rattle cans.
I got a text from a buddy who asked if I wanted to hang out and he dropped by with his set-up and he bring out the Rattle Can and the female joint was like 10° to the right and bent back/up.
What happened lol? I know we're in a trade war with China but does that translate to the items sent here too?
...I guess so lol
China: "FUCKA-YOU America! Raise price on beef we mix with longevity inducing veggies will you? See how you like when I make you shitty Bong!"
That would be my fault, I got in touch with Yinmin and 'had a go' at them and linked them to the post showing the welded ball and said the reason I went with them was to stop all this QC shit and if problems do occur (we are only human) they would fix the problems without all the Chna Bullshit excuses we usually get when a problem arises.but now is saying he will send me another.
Thanks @LesPlenty. I don't expect perfection on knock offs but I do expect a piece that functions as promised. While I was willing to go sans rattle at a discount, I would rather have the rattle and pay the expected price. Your effort is appreciated.That would be my fault, I got in touch with Yinmin and 'had a go' at them ...
They apologized and said they would send a replacement, hopefully, a perfect example now.
Stephen is the one to get from, not sure whom popular glass is.
@Azn2101 no worries, bro - that rule is just for counterfeit glass logos, posting proper glassblowers on instagram is always fine. He's not trying to deceive or trade off of a name that's not his. Although his stuff looks so nice it's probably not for the cheap thread! Lol, but thanks for sharing him here because Im always looking for some new IG artist to follow. I look for the ones who know their craft well but haven't been "discovered" yet. Once that happens and they've got +50,000 followers, I know they're way outta my price range!
The seller of my unsatisfying FC Mod clone was bongglass. Dhgate rep firstly proposed me a 15$ refund while the water piece was worth >50$.I'm talking with DHgate rep about my bad buying experience. I have received some FC-Mod clone. The glass thing that gets inside the main body is too tall (or better said the main body is too short). So it has bad balance if used with the "attachment" on (should it be called the ash catcher?), other than a connection that's far from being airtight. You could probably get the job done if combusting, but that's not an easy thing for them to understand.
After telling me in every single mail that the next day they would close the controversy (without doing it), they offered me a 15$ refund while the piece costed 54$. I said that 15$ was better than nothing but the piece was considerably different than the pics, unusable as I intended to use it and would like better the seller would send me a shorter diffuser (the hing that gets inside the main body) or full refund.
They answered me they'll ask.
Is there any rule on it? Should't they apply the rules of the nation where the purchase goods gets delivered?
The FC-Mod clone I got 3 years ago was from that seller and I had no problems with quality. The new one wasn't as bad as yours but I also got a refund. It seems like the only good FC-mod available now is from Steven. I'm currently waiting for TAG to relist the 4.25" matrix since that's the only piece that I broke and wanted to replace.The seller of my unsatisfying FC Mod clone was bongglass. Dhgate rep firstly proposed me a 15$ refund while the water piece was worth >50$.
The problem was that the main body wasn’t blown as tall as it should so the downstem touches the bottom of it and consequently, also the connection at the top of it wasn’t airtight. It could be used to smoke maybe, not at best, but not to vaporize. Dhgate rep proposed me a 15$ refund. I asked full refund or better, a reship of a shorter downstem. The seller agreed for a reship of the whole piece, but apparently didn’t provide any shipping notification to DHGate and apparently this thing pissed them off, so I got a full refund. I can say I was very lucky and it’s not excluded I will receive a new piece as well. Regardless of how it turned out, I was prepared to take it as a loss. I will now buy only from reputed sellers like yingmin5, popularglass or steven. I misplaced my FC Mod and thought this could be a replacement. Never again.
Since your so rich, just buy from MOBILUS in the USAThe seller of my unsatisfying FC Mod clone was bongglass. Dhgate rep firstly proposed me a 15$ refund while the water piece was worth >50$.
The problem was that the main body wasn’t blown as tall as it should so the downstem touches the bottom of it and consequently, also the connection at the top of it wasn’t airtight. It could be used to smoke maybe, not at best, but not to vaporize. Dhgate rep proposed me a 15$ refund. I asked full refund or better, a reship of a shorter downstem. The seller agreed for a reship of the whole piece, but apparently didn’t provide any shipping notification to DHGate and apparently this thing pissed them off, so I got a full refund. I can say I was very lucky and it’s not excluded I will receive a new piece as well. Regardless of how it turned out, I was prepared to take it as a loss. I will now buy only from reputed sellers like yingmin5, popularglass or steven. I misplaced my FC Mod and thought this could be a replacement. Never again.
Pub Brewers wash and then distilled water and vinegar rinseDamn, I'm almost ashamed to ask this but does anyone know how to get thick/hard water deposits that are REALLY stuck on there on the inside bottom of Glass off?
Let my Rattle Can go (as far as the few other pieces of glass that I don't really like their performance compared to the Cans) and normally 91% iso and rock salt work like a charm (out of simple green concentrate mix) but again it must've gotten Truck Stop Bathroom Bad cause after two good washes it's gotten so that I can kind of see through it but it literally looked I had an opaque bottomed Rattle can.
Anyone got some finger wagging that comes along with some advise. Haha....but seriously lol.
Pub Brewers wash and then distilled water and vinegar rinse
Google search gives lots of options. I'd try soak with some warm vinegar and lemon juice mix. Or get more Simple Green.
I go with PBW
Many will disagree with my assessment?Damn, I'm almost ashamed to ask this but does anyone know how to get thick/hard water deposits that are REALLY stuck on there on the inside bottom of Glass off?
Let my Rattle Can go (as far as the few other pieces of glass that I don't really like their performance compared to the Cans) and normally 91% iso and rock salt work like a charm (out of simple green concentrate mix) but again it must've gotten Truck Stop Bathroom Bad cause after two good washes it's gotten so that I can kind of see through it but it literally looked I had an opaque bottomed Rattle can.
Anyone got some finger wagging that comes along with some advise. Haha....but seriously lol.
Many will disagree with my assessment?
I use RO water + dishwasher soap to make my glass sparkling clean?
Dirty glass destroy’s the flavor of the vapor!
Simple Green will work however the favor might experience alteration?
It dose work for some?
I’m quilty of chasing flavor!
My comment’s is my take?
.
That is so funny that the best cleaner for beer is also the best cleaner for most glass pieces/accessories for smoking and vaping. Really cool, thanks man. =)http://fuckcombustion.com/threads/pbw-the-chemistry-of-clean.7854/page-55
Designed for and most recommended to clean equipment for brewing beer. I use it as the cleaner of last resort or when I have let something get VERY dirty. Otherwise, because I use Cranberry Extract in my water, cleaning rarely needs much more than hot water. But I don't do dabs and I understand they need much more cleanup than flower...
My education is in science and ph was are friend in the lab?http://fuckcombustion.com/threads/pbw-the-chemistry-of-clean.7854/page-55
Designed for and most recommended to clean equipment for brewing beer. I use it as the cleaner of last resort or when I have let something get VERY dirty. Otherwise, because I use Cranberry Extract in my water, cleaning rarely needs much more than hot water. But I don't do dabs and I understand they need much more cleanup than flower...