Discontinued Vapor Blunt

ninjamaster

Is ALWAYS THERE
Soulhunter said:
Litle update.
So now the vapor blunt has been charged up and ready for experimentation :)
The charge time was realy fast, but i dont know if the batteries were flat or came charged. anyhow 20-30 minutes was all it took this first time.
I realy like the size and looks of this thing, feals realy nice in my hand :)
But i would not have complained if it were 1/3 or even 1/4 shorter.

It kinda feals like the vapor blunt realy cant decide if it is a cheap plastic toy or a sturdy durable unit.
Holding it in my hand it feals kinda sturdy, but looks wise it is a toy.
The power button realy contributes to the whole toy look, and the glue stains does not help the overall impression.

This unit reaks of plastic/cemical smell. it could well be glue spills on the inside of the unit.
I have cleaned of the unit with some alcohol and have run it two full cyckles in turbo mode. My whole livingroom now smells realy nasty. So i hope that is just leftovers beeing burnt off.
The bowl still smells, but not as much as it did right out of the box.
I tried to hit the unit with empty bowl just to see if i could taste anything, and yes i defenitly taste the plastick.
So i will run it a couple more cyckles on turbo mode to see if i can burn out that taste/smell.

I realy wish this thing was not glued together, i would love to take it apart and look how it is built.
(And throw all the parts in my oven :p)

More later ;)
WHOA! This does not sound like a typical VB ive seen mane! At the shop that I work at, I run every Vapor Blunt sold on both cycles to ensure proper heating... and never have I smelt or seen any glue!
Our shop has sold many units and everyone seems to be happy with the product!
You sould holla at the VB doods they'll probably help you out!
 
ninjamaster,

TherealVaporblunt

Well-Known Member
Manufacturer
I have to confirm with my factory on Monday, but Im 99 percent sure there is no glue in the vaporblunt. It snaps and screws together. I don't believe there is glue involved
 
TherealVaporblunt,

THCMuscle

Well-Known Member
I will agree and comment on the fast charge time. It seemed like mine charged from dead in under an hour, and I rarely ran it dead. Usual charge time was about 30 min.
 
THCMuscle,

Pcpvapors

Well-Known Member
I have to say I'm impressed, currently at hit 25 with the ABV a very very light gold and green specked ABV, with clouds still coming at the standard temp. I do like the flavored tips it's not overpowering or in anyway mess with the taste of the herb, but if you run your tongue over your lips it's noticeable and nice. For the hit technique, I use the Long slow method of the MFLB which is working great. Really medicated as well. Will return once again in about a week with more thoughts.
 
Pcpvapors,

THCMuscle

Well-Known Member
The bowl does indeed go forever. You'd have to have a hell of a tollerance to polish it off in a sitting.
 
THCMuscle,

Pcpvapors

Well-Known Member
I do like your breathing through your nose technique it does work incredibly well THC.
 
Pcpvapors,

Soulhunter

Active Member
TherealVaporblunt said:
I have to confirm with my factory on Monday, but Im 99 percent sure there is no glue in the vaporblunt. It snaps and screws together. I don't believe there is glue involved

Ok, sorry for spreading missinformation. With a closer inspection i can se that what i mistook for glue leftovers actualy is marks after sanding the unit.
So no glue! But still dont look to nice.
I have tried to take a picture but i cant get it on camera :p
 
Soulhunter,

TherealVaporblunt

Well-Known Member
Manufacturer
I have never heard of a vaporblunt being sanded. It's made in plastic molds. I wish you would post a picture so I could understand what your talking about! I read through your post that you have made ( soulhunter) and I have to ask, do you work for another vape company? I am not the first to question this, in the solo thread 2 other people asked the same question and I didn't see a response for you?
 
TherealVaporblunt,

OF

Well-Known Member
THCMuscle said:
The bowl does indeed go forever. You'd have to have a hell of a tollerance to polish it off in a sitting.

Then again didn't one of the Principals of this interesting guy wax on about the fine points of SEVEN GRAM BLUNTS? That has caused me to question my judgment in such matters. Some guys get out more than others, I guess.

OF
 
OF,

Pcpvapors

Well-Known Member
I've had 4 2-3 minute sessions using around .15 it's about a 3/4 full bowl with no packing. I'm extremely satisfied so far
 
Pcpvapors,

SF Giant

Reluctant vape collector
TherealVaporblunt said:
I have never heard of a vaporblunt being sanded. It's made in plastic molds. I wish you would post a picture so I could understand what your talking about! I read through your post that you have made ( soulhunter) and I have to ask, do you work for another vape company? I am not the first to question this, in the solo thread 2 other people asked the same question and I didn't see a response for you?
As a manufacturer iit makes you look pretty classless to call this guy a shill because he isn't giving your vape rave reviews, if you haven't noticed no one else (except your obvious shills of course) has said this thing knocks it out of the park either.
 
SF Giant,

TherealVaporblunt

Well-Known Member
Manufacturer
OF said:
THCMuscle said:
The bowl does indeed go forever. You'd have to have a hell of a tollerance to polish it off in a sitting.

Then again didn't one of the Principals of this interesting guy wax on about the fine points of SEVEN GRAM BLUNTS? That has caused me to question my judgment in such matters. Some guys get out more than others, I guess.

OF
True, I am a heavy user.
 
TherealVaporblunt,

OF

Well-Known Member
TherealVaporblunt said:
OF said:
THCMuscle said:
The bowl does indeed go forever. You'd have to have a hell of a tollerance to polish it off in a sitting.

Then again didn't one of the Principals of this interesting guy wax on about the fine points of SEVEN GRAM BLUNTS? That has caused me to question my judgment in such matters. Some guys get out more than others, I guess.

OF
True, I am a heavy user.

No, I think you get FAN MAIL from heavy users. You're in the next class......

OF
 

Soulhunter

Active Member
TherealVaporblunt said:
I have never heard of a vaporblunt being sanded. It's made in plastic molds. I wish you would post a picture so I could understand what your talking about! I read through your post that you have made ( soulhunter) and I have to ask, do you work for another vape company? I am not the first to question this, in the solo thread 2 other people asked the same question and I didn't see a response for you?

No, I do not work for another company, and the reason i did not ansver in the solo thread is because i thought the question was so stoopid.
And i am sorry i cant give u picture, but my camera is to crapy to capture those details.
But i am sure it is from sanding down the edges. When u mold things u always end up with some sort of "extra" parts that ned to be removed. Round the edges.

The unit still reaks of plastic so i have not vaped so many bowls on it yet.
But i have noticed that the airpath is leaking. If i blow hard in to the mouthpiece i can feal air comming out the hole where u connect the charger.
Dont think i will vape any more on this thing. The poastic taste is realy horrible.
 
Soulhunter,

Donkey

Active Member
Quick question - does anyone know how well the device runs plugged in vs not plugged in? and how long does each battery last? Thanks in advance :peace:
 
Donkey,

TherealVaporblunt

Well-Known Member
Manufacturer
I don't believe the unit smells of plastic. I have 1000's of vaporblunts on my shelves in my office/warehouse and I've never smelled plastic. Your details just aren't making sense to me. If you read through thcmucles, ninja master and pcpvapors reviews the all compliment the taste. (maybe not pcpvapors, I may be wrong there) out of every complaint I have ever heard nobody has EVER said the unit smells or taste like plastic.
 
TherealVaporblunt,

Soulhunter

Active Member
TherealVaporblunt said:
I don't believe the unit smells of plastic. I have 1000's of vaporblunts on my shelves in my office/warehouse and I've never smelled plastic. Your details just aren't making sense to me. If you read through thcmucles, ninja master and pcpvapors reviews the all compliment the taste. (maybe not pcpvapors, I may be wrong there) out of every complaint I have ever heard nobody has EVER said the unit smells or taste like plastic.

Yes, so mby i have been unlucky and gotten a faulty unit. i can even taste the plastick when i got a fresh bowl of herb packed in the unit. So I am realy not a happy customer this far.

I realy would like this thing to work, I like it much more than the Solo witch in my eyes was garbage.
So i am realy disapointed that this unit taste nasty, cause i realy like the looks and feel of the unit (besides the power button)

I would be glad to find a agreement on how to replace my unit.

Peace!
 
Soulhunter,

TherealVaporblunt

Well-Known Member
Manufacturer
I will gladly replace your unit, customer satisfaction is our #1 priority. Email me the name and address that you purchased under and i will email you back instructions of how to return your Vaporblunt.
 
TherealVaporblunt,
i bought a vaporBLUNT right before the holidays and have been vapin' steady wit it ever since...this unit held me up (like suspenders) on a recent road trip.....longer, steady hits produce fat clouds. if you arnt getting nice hits from this unit you dont know how to hit any device (vape or not) that has a 2mm (MAX) line running from the heating element to your lips...second, anyone who gets a burning plastic taste, SOULHUNTER namely, you obviously used the plastic cleaning bristle just a little too quick homie, and didn't let your unit properly cool down before attempting to clean said product, thus, melting the tips of the bristles along the walls of your screen/bowl...and because you did this, it tells me that the vape works great, and you just were not thinking clearly...understandable...also, if you are taking steady hits and still are not achieving vicious clouds, then you may want to make sure the tip-cap, covering the Li-ion battery is properly sealed and the vapor-flow line is unrestricted...i have found that even a slight turn short of 12:00 can drastically hinder the cloud production...these are the only problems i have found with this unit and i can already tell is the problem with over 75% of you impatient, social-blog-addicted, schmokin' novices out there...look...i have the volcano digit solid valve which, if you actually used that unit, know that it crushes all other vapes by far...the vaporBLUNT is the ONLY portable vape on the market that produces a constant, concentrated, potent, vapor-production PER HIT, GIVEN all the points i listed about are in check/on point....PLEASE holla if you wanna call me out on anything but sorry i dont post videos cuz i dont care that much about all of your misfortunes enough to physically prove anything, nor do i owe anyone anything except the TheRealVaporBlunt a "thank-you" for being so attentive and vocal to your clientele's thoughts and criticisms...

mod note: We have rules here. I suggest you read 'em.
 
FlipBricksDailyFURBY,

Kaptan

Well-Known Member
FlipBricksDailyFURBY said:
.the vaporBLUNT is the ONLY portable vape on the market that produces a constant, concentrated, potent, vapor-production PER HIT, GIVEN all the points i listed about are in check/on point....PLEASE holla if you wanna call me out on anything...

I guess you never used a SOLO?
 
Kaptan,

dorkus_molorkus

Well-Known Member
dont cha love it when someone makes their 1st post, and they call everyone an asshole ( impatient, social-blog-addicted, schmokin' novices-aka assholes), then tell us that we are stupid.(see the previous definition of asshole) All the while making outrageous statements and assumptions about which vape is best on the planet & produces the best clouds.

I doubt you have tried all the vapes out there??

I willing to bet, Soulhunter will call your assumption incorrect. I suspect soulhunter is possibly hypersensitive to any vape with plastic in it, but that is another discussion.


Oh & if you expect anyone to read your tripe, paragraphs are your friends.


awesome 1st post, dude.
 
dorkus_molorkus,

t-dub

Vapor Sloth
TherealVaporblunt said:
I don't believe the unit smells of plastic.

I would just like to point out the difference in tone from the manufacturer in this thread compared to some others here. First reflex is to not believe the paying consumer . . . sigh. This, combined with everything else I have seen in this thread, has led me to the conclusion that the Vapor Blunt is not for me.

t-dub
 
t-dub,

sessnet

Noob Saibot
I was sort of on the fence with this vape...

Can I ask how the sales are going? Better/worse/on par with expectations?
 
sessnet,
Top Bottom