stickstones
Vapor concierge
you still need to charge it
The Pinnacle by Vaporblunt
- Thread starter TherealVaporblunt
- Start date
flakmunkey
New Member
I hope you love it as much as I do mine so far. Just got back from my dinner break at work, feeling great!
*edit* mine came "almost full" as well, solid blue in like a minute, that said I still let it charge for a few hours just to be safe. Last thing I want is to ruin the battery on my new best friend.
Pickz
Vapes on vapes on vapes!
Well I'm loving it so far. Had a few partial sessions earlier with some buddies and just had a session by myself with the tiny amount I had left (like 1/3 of a bullet plus some kief from my grinder). I just woke up from a nap and it has as me feelin' 
right now. It is going to be perfect for my needs, even though I was vaping at higher temps with my Vap 2.0 I don't mind low temp vaping. The primary reason I got this was for Frisbee Golfing so being discreet and portable were top priorities for me. The Pinnacle certainly fits the bill. My technique isn't on par with UUAA's vid, but it'll hopefully get there. No complaints though. My case (very similar to other people's setups they posted pics of on here) hasn't arrived yet, but funny enough the only thing I need are the plastic tubes to store my bullets in. The gas stations around me stopped carrying the cheap cigars that came in them so I'll have to find another alternative. I wish I had more stuff right now so I could use it more, but after the weekend I will and can start putting in my mileage. Sorry to rant, it is just in my nature, but to sum it up I'm not saying anything that hasn't been said before, rather sharing my similar (initial) experience. Not a cloud chaser, but I could see it being perfect for many people and is going to be perfect in the way I will be using it!
Edit: This will tide me over until I can get my hands on an Ascent. Not on any preorder lists so it'll still be a bit, but until then I'm set.
right now. It is going to be perfect for my needs, even though I was vaping at higher temps with my Vap 2.0 I don't mind low temp vaping. The primary reason I got this was for Frisbee Golfing so being discreet and portable were top priorities for me. The Pinnacle certainly fits the bill. My technique isn't on par with UUAA's vid, but it'll hopefully get there. No complaints though. My case (very similar to other people's setups they posted pics of on here) hasn't arrived yet, but funny enough the only thing I need are the plastic tubes to store my bullets in. The gas stations around me stopped carrying the cheap cigars that came in them so I'll have to find another alternative. I wish I had more stuff right now so I could use it more, but after the weekend I will and can start putting in my mileage. Sorry to rant, it is just in my nature, but to sum it up I'm not saying anything that hasn't been said before, rather sharing my similar (initial) experience. Not a cloud chaser, but I could see it being perfect for many people and is going to be perfect in the way I will be using it! Edit: This will tide me over until I can get my hands on an Ascent. Not on any preorder lists so it'll still be a bit, but until then I'm set.
flakmunkey
New Member
OOO, that sounds perfect
I'm back and I wanted to thank trvb for being so damn helpful! I drove to Ann arbor and they replaced my pinnacle wt on the spot! Great little ejuice bar btw! This kept me from having to deal with all of gv's rma bs! I so appreciate it trvb!
On a side note, I have spent a lot of time with my pinnacle now and this thing rocks! I am a low temp vaporist and it's great for my situation. As much as I love the bullets, I put a screen in the bottom of my heating chamber and I load directly into the chamber (like the original davinci). Doing this takes the pn to a whole new level! I suggest you other on users give this a try. You'll love the results!
On a side note, I have spent a lot of time with my pinnacle now and this thing rocks! I am a low temp vaporist and it's great for my situation. As much as I love the bullets, I put a screen in the bottom of my heating chamber and I load directly into the chamber (like the original davinci). Doing this takes the pn to a whole new level! I suggest you other on users give this a try. You'll love the results!
Sonics420
Well-Known Member
Finally able to get a hold of the Pinnacle. I will try it out once its done charging
I know its not going to give me high temps like the XP but its always nice to try out different vapes. I like the look and feel of this vape so far and the charging base is cool, the packaging is nice also.
stickstones
Vapor concierge
Fucking bold! Are you getting hotter hits?
Sonics420
Well-Known Member
Guys, I gotta say, sorry to TRVB for sleepin on the Pinnacle.. this thing kicks ass..The flavor is great and lasts long, the hits are very smooth.. I can get clouds and got it on my 3rd-4th pull(heat on orange).. Still getting them now. 
I'll put up a comparison vid of xp vs pn soon, I am pretty excited for the PNPro also(if thats still dropping).
I'll put up a comparison vid of xp vs pn soon, I am pretty excited for the PNPro also(if thats still dropping).
No not hotter as I use it pretty exclusively with the wt but it is way denser clouds! Taste lasts just as long as before, load lasts just as long. The heating chamber is stainless just like the bullets and with the screen in the bottom your material is no closer to anything than it is when it's in the bullet. Empty while hot and it falls right out and looks perfectly clean. Try it guys I swear you won't regret it. The only thing you lose is the novelty of having pre-packed bullets but, you gain a lot of vapor and it medicated even better than it already did!
Medical Mark
Well-Known Member
Hey dude I'm trying this method as well and your absolutely right eve burnt not hot at all and the vapor is much denser but the loads don't last a long but wow what a differnce hey, awesome glad I tried this.
Cheers medical mark
Sonics420
Well-Known Member
props bro.. u aint lyin.. i just stuffed the whole chamber. I like using it this way much better cause I dont have to deal with a hot bullet.
dreamer, i just cut a screen to fit and pushed it down with the wooden tip... basically looks like the bottom of your inh004 now
Sonics420
Well-Known Member
What holes on the side of the chamber? I see SS walls and a white bottom, idk Ill look again tho..
The MP would probably smell overtime anyway, hopefully I can swab the walls and blow whatever debris out or just replace the screen whenever I need it squeaky clean..
I am getting much better hits now and my ABV is slightly darker than before, great find, vapedandconfused just made my first day with the PN much better lol.
The MP would probably smell overtime anyway, hopefully I can swab the walls and blow whatever debris out or just replace the screen whenever I need it squeaky clean..
I am getting much better hits now and my ABV is slightly darker than before, great find, vapedandconfused just made my first day with the PN much better lol.
I domed my screen a little bit so it actually covers the holes. The material is no closer to anything than when it's in the bullet. If you familiar with the original davinci I used a replacement screen for the bottom if it's herb chamber and it was perfect. I removed the screen last night to see if anything had fallen through and it was just a little kief dust. No more than could've fallen through the bullet.
Glad I could help you guys out. I was more than happy to be the pinnacle pioneer on this one.
Glad I could help you guys out. I was more than happy to be the pinnacle pioneer on this one.
Dreamerr
Always in a state of confusion and silliness♀
sonic the holes are on the side wall above the bottom. They are hard to see and I thought for the longest that it was solid till I pried the answer out of engineer and trvb. So can we assume you put your dome upwards like in an ssv want above the holes? A pic would still be great just for the visual please.
No actually the dome side is down so it's a cup at the bottom. I'll snap a couple pics later and show you dreamerr.
I also suspect that we can get this same result if trvb made the bullets completely out of screen with just the flared SS collar at the top. Then it would produce like this but still have removeable bullets. In theory. If this works trvb I want dibs on the first set! lol
I also suspect that we can get this same result if trvb made the bullets completely out of screen with just the flared SS collar at the top. Then it would produce like this but still have removeable bullets. In theory. If this works trvb I want dibs on the first set! lol
Dreamerr
Always in a state of confusion and silliness♀
Oh don't do that just yet sonics. did you see the pics of my quick change solution along with toros idea. I have two tubes one with a green cover...green go and one with a red cover stop spent. I never touch a bullet cause it is just a dump in and out. I have the bullets in the thing ready to load. I have so many bullets now I can out last the battery. I hated them in the beginning cause they are harder to load then I like but now I load if I know I am going out a mess load of them cap them with the white caps and I am ready for my outting. I don't think I would want to empty the chamber on the go as this is so flawless and easy. I clean everything when I get home. No wasted abv or anything. Also no smell as they are in capped tubes.
Now if you need a screen I am sure you can find one around your house somewhere or just stop at the store and get some for a buck. Bullets are expensive so you don't want to ruin one on an experiment. If you hate the bullets either of you send them my way.
I might try the screen thing for an experiment at home but in practice no way for me.
Now if you need a screen I am sure you can find one around your house somewhere or just stop at the store and get some for a buck. Bullets are expensive so you don't want to ruin one on an experiment. If you hate the bullets either of you send them my way.
I might try the screen thing for an experiment at home but in practice no way for me.
See for me the difference in vapor is more than worth it to me to deal with not having the bullets. Although I think my bullet entirely of screen idea would be the best of both worlds. my method allows the pinnacle to actually use a lot of conduction but still have that great convection taste.Turn your pinnacle on high and let it get to temp, drop a empty bullet in for five seconds. Even without the lid on or air being drawn through it the bullet will burn the shit out of you. That means the chamber walls themself get very hot. So when you remove that extra wall of SS bullet you get the conductive heat.
I dunno I'm using a bit bigger micron than the bullet screen for my bottom screen and still getting just a wee bit of dust after 5 days like this.
Dreamerr
Always in a state of confusion and silliness♀
Good to know.
Out of curiosity since my PN was cleaned the other day, I took a flashlight and looked at the bottom and it is discolored...oil buildup color. I tried a piece of iso cotton with a tweezer and kept twirling it to get it off to no avail. I really think that the inside will get reclaimed up fairly well so it is just a matter of if you want to deal with that or not. I am not happy I can't get the stuff off the bottom since I do want to travel with this vape. We know i can boil the mp/pong but the chamber is a whole other story.
Out of curiosity since my PN was cleaned the other day, I took a flashlight and looked at the bottom and it is discolored...oil buildup color. I tried a piece of iso cotton with a tweezer and kept twirling it to get it off to no avail. I really think that the inside will get reclaimed up fairly well so it is just a matter of if you want to deal with that or not. I am not happy I can't get the stuff off the bottom since I do want to travel with this vape. We know i can boil the mp/pong but the chamber is a whole other story.
I believe that the white at the bottom of the chamber is the ptfe plastic that engineer and trvb have spoke of. Yes it does seem to stain just a bit, but that'll happen regardless whether your using my method or the bullet.
Pickz
Vapes on vapes on vapes!
I'm liking this more and more as I go. It definitely has a learning curve as far as loading and hit techniques. I put mine on high right away and start with a constant series of slow steady draws. I get some decent vapor, definitely visible. I am loading it full ~.3g / bullet like recommended maybe a little too much, but I'll figure it out. Anyways I go for a full ten minute session with clouds getting progressively better. I always have had a decent amount left before the auto shutoff even when I am constantly taking pulls from it. So I turn it on for another session and keep getting visible vapor. I'm not sure why it's taking me so long to go through a bullet, I believe I'm loading them correctly and have very fine ground, dry herb. Either way I'm satisfied, enjoying low temp vaping and it's personally getting me quite medicated.
Edit: Kinda showing my vapor-noobness there. I was taking pulls from it as it was heating up and it just about doubled the warm-up time YMMV. Then I
realized that because I was constantly taking pulls trying to heat it up (thinking it worked like fire) when really I am cooling it down. I'm putting some pauses in between my pulls and getting better results.
Edit: Kinda showing my vapor-noobness there. I was taking pulls from it as it was heating up and it just about doubled the warm-up time YMMV. Then I
realized that because I was constantly taking pulls trying to heat it up (thinking it worked like fire) when really I am cooling it down. I'm putting some pauses in between my pulls and getting better results.