I have seen people combust in vapes often. It is absolutely possible and has nothing to do with health or regulations. But black duff doesn't mean combustion.
Multi-brand Xmax V3Pro vaporizer, convection, on-demand&session.
- Thread starter PPN
- Start date
I have seen people combust in vapes often. It is absolutely possible and has nothing to do with health or regulations. But black duff doesn't mean combustion.
Hi, sorry for the late reply, I missed your post. Is the other member suggestion fixed the issue? If not be aware your device is under warranty (1 year after the date of purchase) if the error message still show-up.
When we released first the V3Pro, the customers complained about the heater to be not hot enough, next batch had seen its heater maxed out in order to fasten vapor production and to push the abv as dark as possible, we did that move cause we listened our customers. Although the counterpart is much more risks to char the load at the higher temp settings. The selected temp will be accurate only when the device is used under ideal conditions of ambient T°, no wind, weed's normal moisture and the right airflow (airflow is influenced by user's draw and loading style). So, if you set the device at max temp, load the chamber tight with extra dry weed, extend your session (stop when taste is done after 4-8 hits, it depends the weed quality and load size) and draw too slow, yes charrring may happen, usually you are ending with a green ring with black bits on the center. A loose load and a stronger draw may fix the issue but try to keep your buds in a sealed jar to avoid it dries out too fast!
Best regards!
dampo
Well-Known Member
Any tips on using the V3 avoiding coughing?
I'll explain: my SO has been medicating with dynavaps, atm with the Wand, which has a tendency to easily combust, due in part to the fact the click is hard to hear.
But using the Dyna's there is never a coughing problem, to have an alternative we got a OG Mighty, had to return it because the coughing with this vape was immediate and bad. A real problem with asthma........
So, i have been reading good things about the V3, it being relatively cheap i bought one.
any advice is welcome!
For our europeans: 63 euro's, no shipping costs
I'll explain: my SO has been medicating with dynavaps, atm with the Wand, which has a tendency to easily combust, due in part to the fact the click is hard to hear.
But using the Dyna's there is never a coughing problem, to have an alternative we got a OG Mighty, had to return it because the coughing with this vape was immediate and bad. A real problem with asthma........
So, i have been reading good things about the V3, it being relatively cheap i bought one.
any advice is welcome!
For our europeans: 63 euro's, no shipping costs
seedy53
Well-Known Member
lower temps 360f and mouth to lungs draws, not direct to lungs draws. it is terps that cause cough and/or hot vapor. we all cough some times when weed has a lot of terps first 2 hits usually. use your asthma quick spray first and/or take a drink of water before hitting- or use a water bong with the v3. or a glass j-hook for extra cooling.
Hi, I agree with @seedy53 suggestions but I want to add the loading size has a huge impact on coughing, with smaller loads/micro-dosing you will enjoy smooth hits. I remenber my old Vrip wa&s a cougher due to the rather large loadwhile my log vape is always very smooth in throat!
About your Wand and Dynavap, I suggest to try to heat it before the Click, at least for a few first hits, you will be surprised how thick is the vapor (it's a technic only available if you have a Wand, I don't know why but it looks like most others IH are working differently (need to heat a few seconds past the Click!). I personnally never combusted with this setup! Sorry to be out of topic!
Another post to announce this amazing Community we are actually running a 420 XMAX GIVEAWAY!!!
Your chance to win a Xmax V3Pro or a Xmax Qomo (4 winners/each models), to enter, please, click on the link above:
www.topgreen-tech.com
Good luck!
Your chance to win a Xmax V3Pro or a Xmax Qomo (4 winners/each models), to enter, please, click on the link above:
420 🌿 GIVEAWAY *XMAX VAPORIZER - Topgreen
Calling all herb and wax connoisseurs! The most anticipated event of the year, 420, is almost here, and XMAX VAPORIZER wants to make it extra special for you. Get ready to elevate your vaping and dabbing experience with our amazing 420 Giveaway!
Good luck!
BlazeDis
Well-Known Member
Yep mine too , not quite right are they ?
vapviking
Old & In the Way
Actually I came to see it as an issue with the silicone insert, the part holding the screen. If that is pushed up a little into the plastic housing, it doesn't wobble (much).
But when I do seat the silicone to where it seems 'right' there is a little rocking.
dampo
Well-Known Member
UPDATE:
My apprehension regarding coughing with the V3 has been laid to rest!
started with the advised smallish load, 160 c, gradually stepping up to 195 c, no problem being too harsh at all.
Cleaning with iso and two burnoffs, no residual smell or taste. ( due too work history i am extremely sensitive to chemicals, so this was a concern.)
So, happy camper.
My apprehension regarding coughing with the V3 has been laid to rest!
started with the advised smallish load, 160 c, gradually stepping up to 195 c, no problem being too harsh at all.
Cleaning with iso and two burnoffs, no residual smell or taste. ( due too work history i am extremely sensitive to chemicals, so this was a concern.)
So, happy camper.
GIVEAWAY RESULTS!! The 420 Giveaway is now over and the winners were published in our website, link here:
"I'll reppost the link later, sorry for the troubles"
And don't forget to check your emails if you are one of the winners! Thank you for everybody's participation!
"I'll reppost the link later, sorry for the troubles"
And don't forget to check your emails if you are one of the winners! Thank you for everybody's participation!
Yep, I noticed that too although I noticed the Attachments to be wooble only when device and attachment are cold, after heat-up and one or two hit they sit a lot better, isn't it? I think the issue is exactly like @vapviking said, the silicone holder/housing, when cold, doesn't fit the top of the chamber perfectly. I'll transmit that concern to the team!
Great to know this is worked for you, be happy... Camper
Last edited:
vaping herbs
Well-Known Member
Which dosing capsules fit best with the Xmax V3Pro?
Nebelmann
Well-Known Member
Got me this set of 5. working perfectly. The capsules are slightly different to the ones I use in my Fury Edge.
Thank you very much for that kind&positive post about your experience with Xmax V3Pro, we are glad it works for you!
Yes they are slighly less weight and larger by an hair than the Fury caps, this is offer more efficiency cause there is less metal to heat-up and no hot air can "bypass" the dosing caps by going in-between the chamber wall and the caps. Thgank you for the suggestion!
Got me this set of 5. working perfectly. The capsules are slightly different to the ones I use in my Fury Edge.
It looks like all the Giveaway winners were contacted and they all the 8 replied, the Giveaway results are visible in https://www.topgreen-tech.com , thanks for all the peoples who entered the Giveaway, if you didn't won this time, stay tuned, there will be more Giveaways in the future! Hope the winners will enjoy the Xmax V3Pro (or the Xmax Qomo Micro E-Rig), they are 8 lucky winners!
kokolokokolokon
Well-Known Member
I thought i will like more the green version than the blue but….hard to chose.
I see this “new” version has a different bottom screen at the chamber (smaller holes in a circular position) with a removable screen to keep it clean. It adds restriction…but just a little. And k like it!
The sound of the buttons are less clunky too!
Cheers and
Pears!
And thanks to @XMAXVAPORIZER !
I see this “new” version has a different bottom screen at the chamber (smaller holes in a circular position) with a removable screen to keep it clean. It adds restriction…but just a little. And k like it!
The sound of the buttons are less clunky too!
Cheers and
Pears!And thanks to @XMAXVAPORIZER !
Thank you for sharing your colour preference! Being myself colour blind, when my "blue" device is in the dark I see it Green , but, when it's next of the real green I can see the blue...I thought i will like more the green version than the blue but….hard to chose.
I see this “new” version has a different bottom screen at the chamber (smaller holes in a circular position) with a removable screen to keep it clean. It adds restriction…but just a little. And k like it!
The sound of the buttons are less clunky too!
Cheers and
And thanks to @XMAXVAPORIZER !
Did you noticed the smoother haptic feedback, perfectly dialed! Thank you for noticing the bottom screen difference, I didn't noticed it myself!
kokolokokolokon
Well-Known Member
Another colorblind here! Hahaha i find it similar to green on dark too! What i care for what i see and what i like!
About the haptic feedback: i noticed it. But i tell you. I had one of the first v3pro with haptic feedback in the on demand mode and it had a hard vibration. The green one has a super smooth vibration. The blue has a intermediate vibration, and i like it because it “wakes me up” but it doesnt scare me like the first one
Petetbay
Well-Known Member
We had a discussion a while back when Xmax came out with the 14mm wpa whether they should come out with a 19mm version. 420edc has released a 19mm glass only adapter for the wpa mount and looks the same as the 14mm joint and to top things off they released curved and straight dimpled mp glass only, very nice.
www.420edc.com
www.420edc.com
XMax V3 Pro 19mm WPA in Clear Glass
Dedicated 19mm Water Pipe Adapter for the XMax V3 Pro. Purchase includes glass piece only that connects to the housing from an XMax Glass Mouthpiece, Glass Adapter or Glass Bubbler for the XMax V3 Pro.
www.420edc.com
XMax V3 Pro 3D Flow Glass Mouthpiece
Mouthpiece alternatives for the XMax V3 Pro in Smokey Quartz borosilicate glass. These 3D Flow mouthpieces provide additional cooling compared to the stock clear glass. 3D Flow indentations cool aroma upon impact and if you opt for the curved variant, the curve provides even more cooling.
www.420edc.com
Thank you for noticing! We'll be dropping our Pill BotL design on the XMax V3 Pro shortly. Stay safe & stay tuned!420edc has released a 19mm glass only adapter for the wpa mount and looks the same as the 14mm joint and to top things off they released curved and straight dimpled mp glass only, very nice.
XMax V3 Pro 19mm WPA in Clear Glass
Dedicated 19mm Water Pipe Adapter for the XMax V3 Pro. Purchase includes glass piece only that connects to the housing from an XMax Glass Mouthpiece, Glass Adapter or Glass Bubbler for the XMax V3 Pro.
XMax V3 Pro 3D Flow Glass Mouthpiece
Mouthpiece alternatives for the XMax V3 Pro in Smokey Quartz borosilicate glass. These 3D Flow mouthpieces provide additional cooling compared to the stock clear glass. 3D Flow indentations cool aroma upon impact and if you opt for the curved variant, the curve provides even more cooling.
vaping herbs
Well-Known Member
Got me this set of 5. working perfectly. The capsules are slightly different to the ones I use in my Fury Edge.
Thank you for the answers!
Are these the capsules?
Capsule de dosage V.A.P. Katalyzer (Xmax V3 Pro)
Capsule de dosage pour V.A.P Katalyzer, sert aussi de cartouche à résine pour garder la chambre de remplissage propre
What is the smallest amount of herbs to put in the capsules? For example, would 0.05g already be enough?
dampo
Well-Known Member
A charger question:
i have a 10 w charger, output 5V/2A and a 20W charger, output:
5V 3A (default) 15w
9V 2A 20w
12V 1.5A 20w
Can i safely use any or both these chargers?
i have a 10 w charger, output 5V/2A and a 20W charger, output:
5V 3A (default) 15w
9V 2A 20w
12V 1.5A 20w
Can i safely use any or both these chargers?
dampo
Well-Known Member
Just concerned about charging with a too high watt/ amp
RustyOldNail
SEARCH for the treasure...
Just about every modern electronic device these days, ONLY DRAW the current needed, or programmed to.
I don’t own a V3, but using an inexpensive USB meter, shows my similar Roffu, draws 1 amp max. You should be fine.