Vapman

[TheScamericann]

Greetings, since the new CLICK works on the Station somewhat...David and Michael are considering doing something. The "something" does not have a release date.

They are considering it. Many of us are a bit saddened that the Station fully does not work on the Station...but, at the end of the day you have two choices: Buy more OG Vapman's and start collecting those that work on the Station or just use the Station without the lights working...it still works and it beats using another chemical though light in effect of butane...food grade or not. I hate using butane. But, I do use it.

If I hear anything or any updates...I will share it with you. I am also, always asking them....I think it would be a great idea if they did seeing that CLICK is a huge success and it would open more clients to be able to use the Station properly. My opinion...just my two cents thank you.

G

Thanks for the reply!
That's great to hear. They should definetely come up with something. The added click opens the vapman up to a whole new user base, a dedicated heating station would be the icing on the cake!


So the current heating station works other than the light on the station? Do you still respect the click with the station as you would with a lighter if that makes sense? I might just go a head and buy one if that's the case.

 

[Texus]

Thanks for the reply!
That's great to hear. They should definetely come up with something. The added click opens the vapman up to a whole new user base, a dedicated heating station would be the icing on the cake!


So the current heating station works other than the light on the station? Do you still respect the click with the station as you would with a lighter if that makes sense? I might just go a head and buy one if that's the case.

You just use the Click sound instead of the lights to know when vape is ready to puff.

 

[Dr. G]

Thanks for the reply!
That's great to hear. They should definetely come up with something. The added click opens the vapman up to a whole new user base, a dedicated heating station would be the icing on the cake!


So the current heating station works other than the light on the station? Do you still respect the click with the station as you would with a lighter if that makes sense? I might just go a head and buy one if that's the case.

Greetings,

I highly recommend getting the new CLICK for many reasons...most important it does have a new design. Also, the sound element is really cool and important.

The CLICK does work on the Station. It works and very well but, there is a condition...the lights do not work to indicate when it is ready. So...you have to listen for the CLICK or count. There is not a visual cue...but, a SOUND one...at the end of the day the STATION works. I believe there will be some kind of adapter in the future to get it working like it suppose to work with lights, etc.

I would get the Purple Heart...my favorite of the offerings...but, the Cherry is a great price offering...all four offerings are beautiful. They all come with the same MP (mouth piece) which is a black POM material. I prefer glass or wood...but, the POM is fine.

I hope you do get one and enjoy it. Cheers.

G

 

[coolbreeze]

Thanks for the reply!
That's great to hear. They should definetely come up with something. The added click opens the vapman up to a whole new user base, a dedicated heating station would be the icing on the cake!


So the current heating station works other than the light on the station? Do you still respect the click with the station as you would with a lighter if that makes sense? I might just go a head and buy one if that's the case.

When you use the other Vapmans, they sit on the heater such that they activate the timing system. When that's activated, the stand measures the heat of your vapman and estimates how long it will have to sit under heat to reach the desired temp, blinking gold as it does so. When the pan temp is reached, the heater shuts down and the light turns solid green, to tell you to have a puff. When you remove the Vapman, the heater turns back on and reaches the set temp.

With the Click, it does not seat properly so it doesn't activate the timing system. However, it does make sufficient contact (with some fiddling) to heat properly. Since the light never changes from solid gold--indicating that it never cools from the desired temp--you can leave your vapman on the stand and build heat with it beyond the properly timed click you get. I don't believe it will build to ever higher temps, it stays within a range because the heater keeps a constant temp, but it will roast bigger hits if it sits some extra seconds.

Upshot: while you lose some functionality, the click makes it somewhat moot and adds possibilities of its own. I like using it by click, plus the additional heat, etc, but no doubt people will benefit from a way to seat it easier.

 

[Dr. G]

When you use the other Vapmans, they sit on the heater such that they activate the timing system. When that's activated, the stand measures the heat of your vapman and estimates how long it will have to sit under heat to reach the desired temp, blinking gold as it does so. When the pan temp is reached, the heater shuts down and the light turns solid green, to tell you to have a puff. When you remove the Vapman, the heater turns back on and reaches the set temp.

With the Click, it does not seat properly so it doesn't activate the timing system. However, it does make sufficient contact (with some fiddling) to heat properly. Since the light never changes from solid gold--indicating that it never cools from the desired temp--you can leave your vapman on the stand and build heat with it beyond the properly timed click you get. I don't believe it will build to ever higher temps, it stays within a range because the heater keeps a constant temp, but it will roast bigger hits if it sits some extra seconds.

Upshot: while you lose some functionality, the click makes it somewhat moot and adds possibilities of its own. I like using it by click, plus the additional heat, etc, but no doubt people will benefit from a way to seat it easier.

So very nicely explained as usual Coolbreeze...I loved reading that...it was technically explained. Thank you so much. Loved it.


Also, there was a post above regarding glass for Vapman wishing there would be shorter glass pieces. I wish for that too....and I wish to have really long ones and beautiful ones. I have reached out to Rogue and Good Vibes they are the only ones that make glass, wood, or acrylic for the Vapman. EdsTnT has also for the Vapman. I am waiting for a piece from Good Vibes...I am sure it is going to be spectacular like everything he makes. I love his work. So, hopefully he will start making Vapman glass all the time.

 

[TigoleBitties]

I don't even own a Vapman but I read this thread a fair amount knowing one day I'll likely get one.

The bottom of the OG Vapman is conical, which matches the conical indented shape of the current Station where it sits nicely. The new Click has a flat bottom with and doesn't activate the Station timer.

If you placed a small, conical piece made of metal in the current seat where the Vapman sits in the station...

It could provide a flat surface where the Click could sit flush and I don't see why this arrangement wouldn't satisfy the timer requirements of the Station. Wouldn't the Station just detect the full contact of a conical shape that it expects? I suppose the density and type of metal would have to meet timing requirements for a good roast but I think it could be done. I don't know if this would interfere with the click however.

 

[Radwin Bodnic]

I don't even own a Vapman but I read this thread a fair amount knowing one day I'll likely get one.

The bottom of the OG Vapman is conical, which matches the conical indented shape of the current Station where it sits nicely. The new Click has a flat bottom with and doesn't activate the Station timer.

If you placed a small, conical piece made of metal in the current seat where the Vapman sits in the station...

It could provide a flat surface where the Click could sit flush and I don't see why this arrangement wouldn't satisfy the timer requirements of the Station. Wouldn't the Station just detect the full contact of a conical shape that it expects? I suppose the density and type of metal would have to meet timing requirements for a good roast but I think it could be done. I don't know if this would interfere with the click however.

The station detects the vapman thanks to a light sensor lower in the can. The click does not works because it sits higher and does not obstructs the sensor. So this adapter wouldn't work...
Also the station is pretty sensitive to the mass of the group bowl + heating pole so I don't really know how it would work it practice...

 

[TigoleBitties]

The station detects the vapman thanks to a light sensor lower in the can. The click does not works because it sits higher and does not obstructs the sensor. So this adapter wouldn't work...
Also the station is pretty sensitive to the mass of the group bowl + heating pole so I don't really know how it would work it practice...

Ah ok... I didn't know it was the Vapman itself that obstructs a light sensor. So you're saying if you stuck a post-it note somewhere on the Vapman it could obstruct the sensor and start the timer?

 

[Chicken No Name]

Ah ok... I didn't know it was the Vapman itself that obstructs a light sensor. So you're saying if you stuck a post-it note somewhere on the Vapman it could obstruct the sensor and start the timer?

Yep. I tried just that with a post it note. It works but not a convenient solution.
If I'm using the station and click I just ignore the lights and rely on the click which works fantastic on the station. Generally the 2 m timmer is sufficient for a session but if not I just switch off and on again.
It's not hyper convenient but I'm unsure how inhale can remediate as the sensor needs to be triggered by the vapman and unless it is moved to accommodate the click I can't see how this can be fixed with existing stations. Maybe future ones will handle both?

 

[ATLelbow]

i wouldn't think i'd be using a magic eraser on mica. its so filigrane you would peel off the layers. but thanks for the recommending.



what @vaping herbs said



above is the single scoop in grenadill. and this is the woodpacker in kingswood:



never use iso on wood. golden rule

Yeah, I meant the bowl. And that is if one wants to clean it. I dont mine the residue, just not too caked up.
And if youre cleaning the inside of the wood mouthpiece with a pipe cleaner in isopropyl, it is fine. Ive been doing it for over a decade. But its personal preference. You do it quick and light and it evaporates.
Its not like the inside of the wooden mouthpiece will decay or one is worried about the finish. Then after cleaning run a pipe cleaner with linseed oil. Thats just what I do, first dry than one or two w iso the dry with a twisted napkin.

The Mica peels layers off over time so i really just wipe it with cloth.

Vapmans are incredibly durable to be honest. Another great quality.

Best wishes

Disagree,at least partially.
I use 99% iso alcohol, not everyone has this available. Usually on the shelf is 70% or 91%, those each being diluted with much more water.

On the question of evaporation, I found this (my italics)

What are the benefits of using 99% isopropyl alcohol?​

Besides its effectiveness as a disinfectant – which is one of the key benefits for many, 99% IPA evaporates quickly and cleanly, leaving behind no significant or notable residues. While its rapid evaporation does reduce its shelf life, it also makes it one of the most effective agents against sticky residues, grease, and grime.

Her is link to the sheet

When is 99% Isopropyl Alcohol Used? Everything You Need to Know

99% isopropyl alcohol (IPA) is one of the purest forms of alcohol available on the market and is used in any circumstance where a lesser concentration

high-techconversions.com

True that any solvent might be prone to absorption by wood, risking some of the gunk gets carried with it into the pores of the wodd, where they will remain. Bad? Maybe, maybe not....

Wiping a wooden object down with water, while it may discolor or change a finish, will likely not be enough water to swell

I agree. It cleans and evaporation is swift. Gets rid of the gunk, and allows for the airflow to return to original state.

hi rené, nope. absolutely not. i have like 8 vapman lighters and all of them have cracks in the plastic. no joke. and i collect lots of expensive lighters. have to

Ive never had an issue. Actually using the same one for 7 years.

 

[Dr. G]

Greetings everyone, here is a photo of my Vapman world at home for family and friends...we enjoy this space many times a day....

 

[coolbreeze]

Greetings everyone, here is a photo of my Vapman world at home for family and friends...we enjoy this space many times a day....

Now THAT is a vapstation! Really relaxing and and cozy looking!

 

[fangorn]

Greetings everyone, here is a photo of my Vapman world at home for family and friends...we enjoy this space many times a day....

wow!!! thank you so much for sharing this with us!! it's an "open air museum" worthy of the name!

i love your space and i'm jealous!!

and i love the way everything is visible and tidy... after vaping, i could stay there for hours enjoying the show... with maybe Pinkfloyd in the background music...

i wouldn't mind.... or rather, i'd love to see details!

you haven't made a post about your new labeling system...
i've seen it on 2-3 pictures and i'm really a fan though!

i would like to be part of "your family or friends" and be invited to your special living room

i am also waiting for updates on the expansion of the Vapman family

when i was young and i was going from france to the netherlands, when i entered a coffee shop, it was disneyland for me... well i think you just created my new disneyland

bravo, bravo and... enjoy!

 

[Dr. G]

wow!!! thank you so much for sharing this with us!! it's an "open air museum" worthy of the name!

i love your space and i'm jealous!!

and i love the way everything is visible and tidy... after vaping, i could stay there for hours enjoying the show... with maybe Pinkfloyd in the background music...

i wouldn't mind.... or rather, i'd love to see details!

you haven't made a post about your new labeling system...
i've seen it on 2-3 pictures and i'm really a fan though!

i would like to be part of "your family or friends" and be invited to your special living room

i am also waiting for updates on the expansion of the Vapman family

when i was young and i was going from france to the netherlands, when i entered a coffee shop, it was disneyland for me... well i think you just created my new disneyland

bravo, bravo and... enjoy!

I am sure there are more extensive Vapman collections than I have acquired over the years...but, thank you kindly for all of those nice words regarding our space for vape. Vaping is very important in our household and cannabis of course...and dedicating a space for it was the logical thing to do. I post this not to boast but, to show you how we enjoy our Vapmans and are so very thankful and appreciative about everything we have in this life. I am retired now...I worked very hard. I am sick now. I think that this is my small gift to myself. I also enjoy showing how beautiful Vapman is...

I do not have a complete Vapman collection...but, one day it will be the Vapman museum! Or one of them....hahahahaah. Ciao and good day.

 

[fangorn]

oh, you don't need to elaborate here...
your enthusiasm for Vapman, René and Inhale shines through in each of your posts on this thread... we know you don't post to brag!!

enjoy your collection and your space!

 

[ATLelbow]

Greetings everyone, here is a photo of my Vapman world at home for family and friends...we enjoy this space many times a day....

Is that 33 Vapmans ? Man, that is cool.

You must have the largest collection in the world. I went into a state of euphoria looking at the pic. Vapmans are so intricate and each one has its own character, even if within the same wood. First time I saw one, I had to have it and bought. Used for many years. Then gave one away to someone because they were blown away. It has that special character that attracts you to it. My collection is now 4 thanks to the click. Ill one day hope to reach 20. You could go a month and use a different one daily. Unreal !

 

[Dr. G]

Is that 33 Vapmans ? Man, that is cool.

You must have the largest collection in the world. I went into a state of euphoria looking at the pic. Vapmans are so intricate and each one has its own character, even if within the same wood. First time I saw one, I had to have it and bought. Used for many years. Then gave one away to someone because they were blown away. It has that special character that attracts you to it. My collection is now 4 thanks to the click. Ill one day hope to reach 20. You could go a month and use a different one daily. Unreal !

By the end of the month the collection will be at 40...I am still not sure if that holds the record...but, it truly is not about that. All of these get used...even the ones that are the rarest....to live is to enjoy every second.

PS I do not have 7 of the known Vapman's in the world...and perhaps too rare to even dream about ever getting...Rene himself told me he does not have a collection. I cannot imagine this...but it is true. But, just this month I was able to acquire 4 rare Vapmans...so, every day there is a chance! So...if you have a rare OG just laying around...

 

[Electrofever]

Greetings everyone, here is a photo of my Vapman world at home for family and friends...we enjoy this space many times a day....

Being waiting for that pic for a long time, thank you so much ! Such a lovely collection in such a lovely place I agree that a zoom in on all the different labels would be nice Enjoy

 

[Gourmet]

I don't even own a Vapman but I read this thread a fair amount knowing one day I'll likely get one.

The bottom of the OG Vapman is conical, which matches the conical indented shape of the current Station where it sits nicely. The new Click has a flat bottom with and doesn't activate the Station timer.

If you placed a small, conical piece made of metal in the current seat where the Vapman sits in the station...

It could provide a flat surface where the Click could sit flush and I don't see why this arrangement wouldn't satisfy the timer requirements of the Station. Wouldn't the Station just detect the full contact of a conical shape that it expects? I suppose the density and type of metal would have to meet timing requirements for a good roast but I think it could be done. I don't know if this would interfere with the click however.

The cone as use is a make-up solution, without a doubt.

However, he only partially solves the problem. We still have the height difference, which means that the light sensor is not triggered,
but above all we have not enough contact surfaces, as the quick sketch illustrates.
This multiplies the heating time, which is contrary to the Vapman philosophy.





So a completely new "saddle" would need, and this will be challenging with the previous station. I am excited to see what solutions the boys come to mind.

However, I also believe that the click is specially designed for the jet, a station solution is secondary for my explanation.

 

[T9R]

However, I also believe that the click is specially designed for the jet, a station solution is secondary for my explanation.

This is my interpretation as well. I honestly don't understand why these two indication systems (Click and Station) need to be combined? Just pick one, or use both for different occasions.

But maybe I'm missing something. I assume it's mainly about wanting to have the bigger bowl of the Click without having to heat it up with a torch lighter?

One thing, for me, that would add value to the Click in this regard, is a small portable heating solution that might even be fully attached to the Vapman body. I picture it working by holding a button until you hear the click, similarly to using a torch.

 

[RedZep]

This is my interpretation as well. I honestly don't understand why these two indication systems (Click and Station) need to be combined? Just pick one, or use both for different occasions.

But maybe I'm missing something. I assume it's mainly about wanting to have the bigger bowl of the Click without having to heat it up with a torch lighter?

One thing, for me, that would add value to the Click in this regard, is a small portable heating solution that might even be fully attached to the Vapman body. I picture it working by holding a button until you hear the click, similarly to using a torch.

I struggle to see the value for the Clicks. One day I would like an OG and a station. But I wouldn't use the Click with the station even if I could. Just seems superfluous to me.

 

[Octavia]

One thing, for me, that would add value to the Click in this regard, is a small portable heating solution that might even be fully attached to the Vapman body. I picture it working by holding a button until you hear the click, similarly to using a torch.

Agreed! I picked up a torch for my click, but would definitely prefer something like a portable IH instead. Open flames (even if controlled) always make me nervous and were one of the main reasons I avoided vapmans for this long.

 

[jbm]

I struggle to see the value for the Clicks. One day I would like an OG and a station. But I wouldn't use the Click with the station even if I could. Just seems superfluous to me.

I haven’t even tried my click with the station. I’m on a break at the moment having been sick, but when I start up again I’ll probably just go back to OGs and 2.0s on the station. Which combo really is, save bowl size, the equivalent of the click.

 

[TigoleBitties]

Agreed! I picked up a torch for my click, but would definitely prefer something like a portable IH instead. Open flames (even if controlled) always make me nervous and were one of the main reasons I avoided vapmans for this long.

Same reasons I still don't have one. I've been thinking about an IH solution for the Vapman though and I don't think it'd be that difficult for the Click or the OG. An inductive metal shape placed inside the Wand with the right surface - flat for the Click to sit on and a conical sleeve similar to what's in the Station for the OG - should work.

A solid inductive metal cylinder could even work for both types of Vapman. One side flat for the Click to sit on and the other edge of the cylinder could have an inverted cone shape to handle the OG. If this small inductive metal could be secured with an insert inside the Wand then I'm pretty sure the Wand has enough power to heat them.

 

[jbm]

Speaking of IHs, has anyone tried the @Camouflet Inductor with the click?