Discontinued VapeXhale Cloud EVO

[ataxian]

Received my evo today! Just wanted to drop in and report that all seems to be well. Elbs are very snug (almost too snug), no electronic smell, and everything seems to be working wonderfully. No hydratube reports since I didn't order one.

Only one elb in and this thing knocked me down....far more of a punch than what I'm used to. Exactly what I was looking for! As for the temps, I started out letting the unit warm up for a good 10 minutes with the dial set to 12. Took like three rips at 12 then turned the dial to 2 for a few more rips. I started getting a "combustion" like taste so I called it quits and pulled the elb. Material was dark brown and fully extracted. I need to search the thread and find out what the dial setting approximates to temp wise. But for now I think I'm going to go lower and then finish off my session at 12. Might play with higher temps when my hydratube from dhgate comes in.

It must be the evo because I'm laughing uncontrollably about the super glue elb comment. I really hope dude was joking....cmon man.

Oh and to all the people complaining about fed ex, I feel ya. Fed ex didn't get mine delivered today until close to 8 pm. I kept checking the tracking because it had been out for delivery since 7 am. I was waiting around all day for it because it need a signature. Oh well....I'm now a proud evo owner. Now onto another elb.

Edit: Second elb in. I believe it was Ataxian who mentioned the waterboarding effect. Very apt description sir.

I've been around the block a few times.
I'm stoked for you!
My VAS has been so embarrassing with all my flapping!

However the EVO is great due to the flavor obtained.

I'm tongue and cheek however I never knew CANNABIS could taste so amazing!
12:00 is perfect for me you may like higher for now until you work your way to FLAVOR COUNTRY!

 

[VapoRoor]

Received my evo today! Just wanted to drop in and report that all seems to be well. Elbs are very snug (almost too snug), no electronic smell, and everything seems to be working wonderfully. No hydratube reports since I didn't order one.

Only one elb in and this thing knocked me down....far more of a punch than what I'm used to. Exactly what I was looking for! As for the temps, I started out letting the unit warm up for a good 10 minutes with the dial set to 12. Took like three rips at 12 then turned the dial to 2 for a few more rips. I started getting a "combustion" like taste so I called it quits and pulled the elb. Material was dark brown and fully extracted. I need to search the thread and find out what the dial setting approximates to temp wise. But for now I think I'm going to go lower and then finish off my session at 12. Might play with higher temps when my hydratube from dhgate comes in.

It must be the evo because I'm laughing uncontrollably about the super glue elb comment. I really hope dude was joking....cmon man.

Oh and to all the people complaining about fed ex, I feel ya. Fed ex didn't get mine delivered today until close to 8 pm. I kept checking the tracking because it had been out for delivery since 7 am. I was waiting around all day for it because it need a signature. Oh well....I'm now a proud evo owner. Now onto another elb.

Edit: Second elb in. I believe it was Ataxian who mentioned the waterboarding effect. Very apt description sir.

Hahaha I couldn't relate to this post enough!!!
The temperatures you listed were my exact ranges.
I find my loved temperature is 12 o'clock max and I don't go any higher than that for flowers.
Concentrate-wise is another ballgame I haven't quite delved into to comment on.
Do you use the vapexhale dry mouthpiece?

 

[jrcmang]

Hahaha I couldn't relate to this post enough!!!
The temperatures you listed were my exact ranges.
I find my loved temperature is 12 o'clock max and I don't go any higher than that for flowers.
Concentrate-wise is another ballgame I haven't quite delved into to comment on.
Do you use the vapexhale dry mouthpiece?

Yep I'm using the dry mouthpiece at the moment. This things rips! Wasn't expecting it to be honest. The closest thing I can compare it to is hitting an old school steam roller. Keep in mind, I've been vaping off an arizer air for the past year so I was initially hitting the evo like that. Second elb in I went down on temp and hit it like I was ripping a bong. First hit was flavor town. Second and third rips im getting huge clouds off of. By hit 4 or 5 the elb is done. I really like being able to extract so quickly. Even after watching all the videos and reading reviews, I still wasn't prepared for how hard this thing hits. Looking forward to getting my hydratube though and capturing the full experience.

 

[ataxian]

Yep I'm using the dry mouthpiece at the moment. This things rips! Wasn't expecting it to be honest. The closest thing I can compare it to is hitting an old school steam roller. Keep in mind, I've been vaping off an arizer air for the past year so I was initially hitting the evo like that. Second elb in I went down on temp and hit it like I was ripping a bong. First hit was flavor town. Second and third rips im getting huge clouds off of. By hit 4 or 5 the elb is done. I really like being able to extract so quickly. Even after watching all the videos and reading reviews, I still wasn't prepared for how hard this thing hits. Looking forward to getting my hydratube though and capturing the full experience.

I need to sleep however my wife made a joke that made my belly ache!

I have a dry tube.
Tonight my custom made hydrotube was sweet as can be!

Milkshake clouds are very medicating!

 

[VapoRoor]

Yep I'm using the dry mouthpiece at the moment. This things rips! Wasn't expecting it to be honest. The closest thing I can compare it to is hitting an old school steam roller. Keep in mind, I've been vaping off an arizer air for the past year so I was initially hitting the evo like that. Second elb in I went down on temp and hit it like I was ripping a bong. First hit was flavor town. Second and third rips im getting huge clouds off of. By hit 4 or 5 the elb is done. I really like being able to extract so quickly. Even after watching all the videos and reading reviews, I still wasn't prepared for how hard this thing hits. Looking forward to getting my hydratube though and capturing the full experience.

we're on opposite sides of the spectrum! experience wise, and you're definitely giving advice on your end! Thanks man, I wanted the full view on the standard mouthpiece and I understand now from what you said.
I have the hydrabomb, and it's a beauty! The hydration is amazing! I used to vape with a Thermovape Cera Loose leaf core & the vapor runs so hot compared to the hydrabomb. I definitely love the whole experience of the EVO because it brings me back to the traditional method where tasting cannabis was introduced. Yet, they made it so much better with temperature settings and hydration pieces! Yaaaassss @stonemonkey55 !!!!!

 

[CarolKing]

I think the regular mouthpiece gets short changed around here. I really like using the regular mouthpiece. It produces some very tasty vapor, especially my Platinum GSC. I know that third unknown strain has to be berry of some kind or grape.

Have a wonderful evening and good vapor trails. The EVO is the bomb - works wonders with concentrates.

 

[shaolinmilk]

Yeah so about the glue... I did vape a bowl off it even after weighing the pros and cons. Probably extremely stupid to do so, but that bowl was kinda worth it. I don't feel sick from it, however never say never. I threw out that ELB and will wait for my new ones to arrive tomorrow.

 

[gaseous_clay]

I miss my EVO. If the sale this Christmas is similar to last, I might have to get a spare...

 

[Justpassedu]

Ok so I dunno whats up with vapexhale , who knows it may even be my bamboo but I am giving up and just not going to email them again bc it has gotten out of hand imo. I purchased some elbs during the sale , a 4pack for $20 , not sure if that was a sale or not but they all came to me and fit way to loose in my Evo to the point that every time I'd inhale they would fly up from the air pressure. I tried pinching them , stretching them out with no success so I emailed support telling them I know I paid for 4 but I only really need two tight fitting working elbs and if they could check them before shipping and they had agreed , I was able to keep my original order and two were being sent free. Those two elbs arrived the same as the others so I email support again and they have apologized saying it was so busy that they did not check them and would personally go check them and send me two more out which I feel was really cool that the customer service was easy to deal with and quick to reply. I get my mail yesterday , open the box and there is about 5 or 6 more elbs , guess what they don't fit 1 is super loose and the rest are so tight that I have to force them in and really be careful taking them out , they get almost stuck in my bamboo , one already smells of avb right out of the box. I just don't want to deal with support again so I am giving up. They tried and I tried. I am just happy it was not a expensive purchase and my next order for vapexhale supplies will most likely be through another supplier. I have my original 2 elbs that work fine and I cleaned them up and I can use the really loose elbs , just not inverted and they don't work as well as a tight elb but they work with the whip kit.

 

[aJtorelax]

Ok so I dunno whats up with vapexhale , who knows it may even be my bamboo but I am giving up and just not going to email them again bc it has gotten out of hand imo. I purchased some elbs during the sale , a 4pack for $20 , not sure if that was a sale or not but they all came to me and fit way to loose in my Evo to the point that every time I'd inhale they would fly up from the air pressure. I tried pinching them , stretching them out with no success so I emailed support telling them I know I paid for 4 but I only really need two tight fitting working elbs and if they could check them before shipping and they had agreed , I was able to keep my original order and two were being sent free. Those two elbs arrived the same as the others so I email support again and they have apologized saying it was so busy that they did not check them and would personally go check them and send me two more out which I feel was really cool that the customer service was easy to deal with and quick to reply. I get my mail yesterday , open the box and there is about 5 or 6 more elbs , guess what they don't fit 1 is super loose and the rest are so tight that I have to force them in and really be careful taking them out , they get almost stuck in my bamboo , one already smells of avb right out of the box. I just don't want to deal with support again so I am giving up. They tried and I tried. I am just happy it was not a expensive purchase and my next order for vapexhale supplies will most likely be through another supplier. I have my original 2 elbs that work fine and I cleaned them up and I can use the really loose elbs , just not inverted and they don't work as well as a tight elb but they work with the whip kit.

hey if they are willing to send 2 free elbs twice now, they are trying to help. I would bet $ if you mailed them either your evo or one of your good elbs, they can get you fitted correctly, if i were you id send them all the bad elbs plus 1 good, and tell them to match the good 1. pain in the ass but at least a solution

 

[jrcmang]

Weird thing just happened with the evo. I turn it on and load up an elb. Go in the other room to do some stuff while letting it heat up for about 10 minutes. Come back and LED is green. Unit feels warm so I insert elb and go to hit it. Didn't feel much warmth at all and didn't exhale any vapor. Well I try again and my hit seems less warm and still no vapor...now I know something is up. So I turn the dial from 12 to 2, and no red LED.....just stays green. It did not appear to be heating up. The LED just stayed green no matter how high I turned the dial.

Anyways I turned it off and unplugged the power cord and let it sit for a few minutes. Plugged it back in and just had a good session so it appears to be working ok now. But I found this very strange....LED was green but it was like it had stopped heating up and would not start back on. Has anyone else experienced this? Should I be concerned?

 

[Justpassedu]

hey if they are willing to send 2 free elbs twice now, they are trying to help. I would bet $ if you mailed them either your evo or one of your good elbs, they can get you fitted correctly, if i were you id send them all the bad elbs plus 1 good, and tell them to match the good 1. pain in the ass but at least a solution

yeah they def tried to help , I am just not 1 to bother them so many times over a $20 purchase and there is no way I would mail them my Evo or take the chance and mail them one of my two only good elbs. I know other sellers that provide elbs that don't have this problem so for my next purchase I will just use them.

 

[1337Dude]

I think my VapeXhale is getting me too high lately. I'll take dabs and forget I even took one. And then it feels like I'm getting high by just by having it in the room with me.

 

[waxdab23]

Weird thing just happened with the evo. I turn it on and load up an elb. Go in the other room to do some stuff while letting it heat up for about 10 minutes. Come back and LED is green. Unit feels warm so I insert elb and go to hit it. Didn't feel much warmth at all and didn't exhale any vapor. Well I try again and my hit seems less warm and still no vapor...now I know something is up. So I turn the dial from 12 to 2, and no red LED.....just stays green. It did not appear to be heating up. The LED just stayed green no matter how high I turned the dial.

Anyways I turned it off and unplugged the power cord and let it sit for a few minutes. Plugged it back in and just had a good session so it appears to be working ok now. But I found this very strange....LED was green but it was like it had stopped heating up and would not start back on. Has anyone else experienced this? Should I be concerned?

Check my previous post regarding this. I had a similar experience the day before it overheated. Not quite what happened with yours but maybe worth keeping an eye on.

I think my VapeXhale is getting me too high lately. I'll take dabs and forget I even took one. And then it feels like I'm getting high by just by having it in the room with me.

Lol nice. Interesting posts in this thread the past couple of days haha.

 

[gaseous_clay]

yeah they def tried to help , I am just not 1 to bother them so many times over a $20 purchase and there is no way I would mail them my Evo or take the chance and mail them one of my two only good elbs. I know other sellers that provide elbs that don't have this problem so for my next purchase I will just use them.

Have you tried pinching the ELB lightly to bend it slightly out of shape?

My recent order of ELB's had 2 that fit fine, 2 that were loose to the point where when inverted they would fall out. I pinched a little bit at a time until i got a snug fit. Worked great!

 

[aJtorelax]

yeah they def tried to help , I am just not 1 to bother them so many times over a $20 purchase and there is no way I would mail them my Evo or take the chance and mail them one of my two only good elbs. I know other sellers that provide elbs that don't have this problem so for my next purchase I will just use them.

I dont think you would be taking a chance mailing in 1 basket, they will at least mail it back to you if nothing else. the 1 good elb you send will enable them to switch out all your bad ones for good fitment.. only problem is you will be rocking just 1 elb for a short while. and its not the $ for you or vxl, i would not expect them to match your fitment without the unit or at least 1 sample since all the bamboo's have very slight variances it seems

"An ELB is a Terrible Thing To Waste"

 

[ataxian]

I dont think you would be taking a chance mailing in 1 basket, they will at least mail it back to you if nothing else. the 1 good elb you send will enable them to switch out all your bad ones for good fitment.. only problem is you will be rocking just 1 elb for a short while. and its not the $ for you or vxl, i would not expect them to match your fitment without the unit or at least 1 sample since all the bamboo's have very slight variances it seems

"An ELB is a Terrible Thing To Waste"

I will make my own ELB'S and NAIL'S. (SHATTER was smooth & easy with a hydrotube)
The EVO I love a lot.
The accessories are lame!

Why BAMBOO?
So many other materials?

SNOW WHITE = WHISTLE while you vape!

 

[Justpassedu]

Yes 1st thing I did was try forming them into shape for better fitment with no luck . I meant I did not want send my Evo in to them bc my elbs do not fit. I wouldn't mind sending them a elb , maybe I'll send them a email . I think I'm ok with two good ones for awhile now. I clean them on the regular with alcohol . I can still use the loose fitting elbs while not inverting using the whip or ht. They work , just not as well .

 

[twosilvertrees]

Slightly related to the ELB conversation since it involves maintenance, but a big THANK YOU to whoever in this thread recommended these brushes. Before I picked 'em up I was using a Mighty brush to clean out the ELBs, but this is waaayyy better at removing the finer particles. It's basically doubled the amount of times I can use an ELB between cleanings, I think. Can't recommend 'em highly enough!

 

[ataxian]

Yes 1st thing I did was try forming them into shape for better fitment with no luck . I meant I did not want send my Evo in to them bc my elbs do not fit. I wouldn't mind sending them a elb , maybe I'll send them a email . I think I'm ok with two good ones for awhile now. I clean them on the regular with alcohol . I can still use the loose fitting elbs while not inverting using the whip or ht. They work , just not as well .

I am a ass hole I know!

I hate the ELB's and NAIL's for me their worthless.
I'm using a ELB that is falling apart.
My @DDave kit is getting me by for now until my new set up is finished.

Dabbing I've gone back to for now.
The NAIL FUNCTION is not a bad concept.
I can't wait to use my EVO with TI2 NAIL's.

Excuse me I have a DAB waiting!

 

[t-dub]

I was watching this new channel called VICELAND the other night and they had a show on called Vice Essentials and they were in Colorado for 420. They went inside to check out the booths and I see a guy hitting an EVO with a Swagger bent neck . . . Keep rockin' VapeXhale . . .

 

[carlosod]

Bros! I think I already mentioned this somewhere. never ever ever ever ever ever ever ever pinch your Elbs just don't do it k. they will warp a little if you use very hot water to clean them or arrive partially twisted in the past.

solution : take your hydrafoot or any adapter with a male 18mm and well make it a female. fuck that hole with your Elb and fuck it good. little rotation action you get the picture. should take seconds and you'll be in perfect shape as it will slot into your evo mmmmmmlikeaglove!!

a nonissue imo. didn't read far back enough to know if this is contemporarily redundant but make sure your Elbs are dry. you think they are, dude I almost assure you they aren't. I'm talking overnight maybe a couple nights sitting out and fully evaporating in the darn weld areas underneath the lid in particular. the lids themselves must be scraped as matter congeals in the mesh becomes nearly impossible to dry out at that point and your flavor/experience may suffer.

moisture bad... vapor GOOD!

 

[KennyPowers]

I have been thinking of ways to secure the cloud evo to my coffee table so that the chance of it falling are reduced to zero. Does anyone have a system in place that they use to assure that the evo does not get knocked over or dragged off the table on accident? I'm considering drawing up a custom table and creating it in the next couple of months but I'm not sure if I want a piece of furniture that is quite so single purposed.

Yes I'm working on one. I'm going to run the power cord through a small box about a quarter gallon in size. Then I will fill the box with concrete. It should weigh about 5 pounds and hold the evo in place. The power cord fits into the evo snugly so all you need is the cord to be heavy on the plug end.

 

[sokesleezy]

Any of you own a Vapor Bros 1? I'm getting the new vape itch and been checking out the evo.

 

[UnidenWallet]

Yeah so about the glue... I did vape a bowl off it even after weighing the pros and cons. Probably extremely stupid to do so, but that bowl was kinda worth it. I don't feel sick from it, however never say never. I threw out that ELB and will wait for my new ones to arrive tomorrow.

That's good. Becareful with the glue because the Evo will melt the glue with the high temperatures and you will be reintroducing glue into your lungs, sealing them shut. It's good you threw them out.