Discontinued VapeXhale Cloud EVO

[HellsWindStaff]

Aw dang. FedEx updated their tracking info, guess its set to arrive the weekend I'm out of town. Since its signature required, I think they will attempt delivery a few times then return it to the sender, is that right? Sigh, I'd have had paid for faster shipping if I knew when they where actually gunna send it out. Hopefully they are willing to send it back to me expedited when they get it back so this doesn't add another 2-3 weeks to my order time.... Already over 20 days... Anyone know how much expedited even is with them? Don't recall having a choice during checkout.

Easy there partner! No need to be hastey. I ordered my EVO when I was out of town on business. Go to Fedex website, request they deliver and hold at a FedEx location convenient to you. Even if you have to drive a bit (mines 30-40 min away) beats having them fail signing x times and sending back and then you waiting for it to be reshipped.

I ordered on a Monday, it tried being delivered on a Wed, I request they hold and it was at the place for me to pick up on my way back in town on a Friday.

Man, what a great day of anticipation that was, driving 5 hours knowing you have an EVO waiting for you lol

 

[Florence]

Go to Fedex website, request they deliver and hold at a FedEx location convenient to you. Even if you have to drive a bit (mines 30-40 min away) beats having them fail signing x times and sending back and then you waiting for it to be reshipped.

Thanks. Guess that's what I'll have to do. FedEx store is only 10 min from where its being sent so that wouldn't be an issue, Never sent things via FedEx, learn new stuff every day I guess.

 

[Naes]

Got mine in October and it is EVO12xxx

Thanks, seems to make sense, I ordered mine in September and it is EVO11xxx. Thanks again!

 

[RobDaBomb]

Thanks so much for all the information everyone! Sorry for the late response, today's been busier than your average Tuesday.

Just seeing the amount of informative and helpful replies received last night makes me happy to be joining the Evo community .

It's good to know that sadly I couldn't purchase my Cloud during the MLK special as they sold out hours before midnight. Of course though this morning I noticed they had more in stock again... just conveniently they were taken off the site until the sale ended last night.

So either I'm going to e-mail them and try to see if they can drop the price to what I would have paid with the MLK special, or wait until their Valentine's day deals instead. Perhaps I should take this as the universe telling me that the "SwaggerTree isn't right for me" and get a different starter kit. As much as I want a Swagger, I do think the SideCirc/SideTree/etc... line is better for me because its shorter and easier to see the chamber while hitting. Perhaps they'll have one of these kits available on V-Day.

@RobDaBomb I took one for the team. The beauty of the EVO is the versatility, you can get some light lower temp tasty clouds, or if you're that guy who wants that big one hitter killer, the EVO can do that in spades!! This is an ELB basically fully packed up, I have the temp up pretty high. I got two very very half assed hits after this still am quite high from it!

Dude... you've just made me so excited I nearly purchased an Evo at full price just now lol. Thank you so much for taking the time and sacrifice to record that! Out of all the Evo videos I've seen - you've by far taken the biggest hit lol. But that was what I needed to see! I'm the kinda guy who loves to get up and take a huge ass rip like that from my bong (although it's always been via combustion - I can't wait to try it with the Evo !) once every half hour or so. Don't get me wrong, I do love session vaping! But it just doesn't get the same job done like a huge bong rip

Thanks again everyone! You've made it so there isn't a single doubt in my mind that the Evo is right for me.

 

[Florence]

So either I'm going to e-mail them and try to see if they can drop the price to what I would have paid with the MLK special, or wait until their Valentine's day deals instead. Perhaps I should take this as the universe telling me that the "SwaggerTree isn't right for me" and get a different starter kit. As much as I want a Swagger, I do think the SideCirc/SideTree/etc... line is better for me because its shorter and easier to see the chamber while hitting. Perhaps they'll have one of these kits available on V-Day.

The swagger tubes seem to be higher quality and I like the lack of logos all over the tubes, rather just one clean logo. I'd love a swagger over the sidecar style.

But, If you message them, most business will still give you the sale if you are close or started working with them while the sale was going. When I was working with Vxl trying to get decent pics from them during the holiday sale (because all their stock pics are garbage), they stated they will honor discounts for transactions started during the discount. (UnderDog's service said the same as well). All my personal issues with Vxl customer service aside, if you message em, idk why they wouldn't. They want your money after all.

 

[Poostuff]

I wonder if anyone's ever sent their new Evo back because they kept pressing the red button on top and couldn't get it to work.
That didn't happen to me.

 

[RobDaBomb]

The swagger tubes seem to be higher quality and I like the lack of logos all over the tubes, rather just one clean logo. I'd love a swagger over the sidecar style.

Yeah I guess if I'm going to get a hundred dollar piece of glass, it should be of the best quality... the Swagger's look sick and sound like they're great. It's hard to tell how big they are from the pictures, but they seem significantly taller than the HydraBombs and sidecar styled tubes. I normally need to keep my stuff hidden in a deep drawer and I'm not sure if the Swagger's would fit upright (which is how I always keep my pieces; up, filled, and ready to go ).

How well can you see into the chamber while hitting a Swagger? Do you have to tilt the Evo more to see the vapor filling into it easily?

But, If you message them, most business will still give you the sale if you are close or started working with them while the sale was going.

Awesome. I should still have the starter kit in my checkout cart. Now it's just up to whether I should purchase the SideTree now at 15% off, or wait until the next sale (probably Valentine's day) and see what glass is offered then...

 

[Seek]

I wonder if anyone's ever sent their new Evo back because they kept pressing the red button on top and couldn't get it to work.
That didn't happen to me.

So you're saying, it did work for you...?

 

[Poostuff]

So you're saying, it did work for you...?

No, but after realising it doesn't work I bet a lot of people find the red button underneath & press them simultaneously to try a hard reset.
Again not me, just sayin..

 

[Seek]

No, but after realising it doesn't work I bet a lot of people find the red button underneath & press them simultaneously to try a hard reset.

Phew, at least thats still better than trying to press just the one on the bottom.
I've watched too many movies to know that big red hidden button are usualy for initiating the self-destruction procedure.

 

[Delta3DStudios]

Hey does anyone have a pair of digital calipers? I'm trying to make a heat-safe stand accessory for the VapeXNail, but I need to know the outside-diameter of the nail before I can design a stand.

PLEASE pm me if you have a nail and calipers. Thank you!

 

[Florence]

Hey does anyone have a pair of digital calipers? I'm trying to make a heat-safe stand accessory for the VapeXNail, but I need to know the outside-diameter of the nail before I can design a stand.

Take a piece of string. Wrap it around the nail. Tada. There's your measurement. Vxl also sells a wooden nail stand on their website for a fair price, looks easy enough to make out of wood though. Unless you really need ultra precise measurements to make a stand.

 

[HellsWindStaff]

Unless you really need ultra precise measurements to make a stand.

Not to speak for him or be an apoligist, but (I'm assuming) he's using a 3d printer. He'll need something more precise then string lol

@Ratchett I don't have calipers, but do you have calipers? If you have calipers but just need a nail to measure, I could try to clean out the glass one I have that didn't fit with my tube properly (the tube was at fault, the nail is totally fine). I always say I am going to try it with my whip kit, but I never do lol so if it would be of better use I would be happy to send it along

 

[Likes2vape]

Hey does anyone have a pair of digital calipers? I'm trying to make a heat-safe stand accessory for the VapeXNail, but I need to know the outside-diameter of the nail before I can design a stand.

PLEASE pm me if you have a nail and calipers. Thank you!

The glass nails are .365

 

[Buildozer]

@RobDaBomb

Bed soon! lol

Nice rip! I haven't heard Blackstar for a really long time! I used to love that album

 

[Havoc]

Hi everybody! I've finally received my Cloud Evo and I'm pretty happy about it. Haven't been able yet to purchase any hydratube, but Vapefiend will hit me up once they receive their order.

You all know about the Vapexhale, I'll spare you my review, there's people doing it better than me.

But I do have some thoughts to share about it with you though

First of all, I'm very happy about the effect of the vaporizer: it gets me stoned quicker, in a better way, for a longer time. Probably with less weed too, I'm not quite sure yet. Can't possibly say anything negative here.

But, I'm a little disappointed about my vapor production and the length of the sessions.
This is how I just proceeded: I put exactly 0.1 g of Durban Poison (love that strain!) in the ELB, let my Cloud Evo heat up for a couple of minutes to 10 o'clock and took two draws that were ok vaporwise, the 3rd one had strongly diminished vapor production and the 4th one stopped producing visible vapor. I pushed the dial up to 12 o'clock, and I couldn't really tell if I was inhaling anything at all.
So yeah, I'm figuring that simply toying with the temperature (and finding the right compromise between vapor and length) and with my amount of herbs will do the trick.
But what procedure would you recommend if you wanted to take 5-6 satifsfying draws per session?
Would a hydratube help?

Also, I'm wondering if using a filler with my weed (like mint) could help me get my necessary high (don't need that much material) and still fill the ELB up to take more draws?
How would I tell apart my AVB from my vaped mint in that case, so i can cook with it afterward without the mint?

Also, I wouldn't leave my filled ELBs in the Cloud Evo while it's still heated up. I did a test with mint, leaving it in the vaporizer for 20 mins while it was on max temperature. The mint came out brown. Less heat wouldn't produce that effect, but I guess your material would still be affected.


0.1g


AVB. I guess I could vape it more?

.
Herbs before being vaped


12 o'clock


10 o'clock

 

[Mangos]

Hi everybody! I've finally received my Cloud Evo and I'm pretty happy about it. Haven't been able yet to purchase any hydratube, but Vapefiend will hit me up once they receive their order.

You all know about the Vapexhale, I'll spare you my review, there's people doing it better than me.

But I do have some thoughts to share about it with you though

First of all, I'm very happy about the effect of the vaporizer: it gets me stoned quicker, in a better way, for a longer time. Probably with less weed too, I'm not quite sure yet. Can't possibly say anything negative here.

But, I'm a little disappointed about my vapor production and the length of the sessions.
This is how I just proceeded: I put exactly 0.1 g of Durban Poison (love that strain!) in the ELB, let my Cloud Evo heat up for a couple of minutes to 10 o'clock and took two draws that were ok vaporwise, the 3rd one had strongly diminished vapor production and the 4th one stopped producing visible vapor. I pushed the dial up to 12 o'clock, and I couldn't really tell if I was inhaling anything at all.
So yeah, I'm figuring that simply toying with the temperature (and finding the right compromise between vapor and length) and with my amount of herbs will do the trick.
But what procedure would you recommend if you wanted to take 5-6 satifsfying draws per session?
Would a hydratube help?

Also, I'm wondering if using a filler with my weed (like mint) could help me get my necessary high (don't need that much material) and still fill the ELB up to take more draws?
How would I tell apart my AVB from my vaped mint in that case, so i can cook with it afterward without the mint?

Also, I wouldn't leave my filled ELBs in the Cloud Evo while it's still heated up. I did a test with mint, leaving it in the vaporizer for 20 mins while it was on max temperature. The mint came out brown. Less heat wouldn't produce that effect, but I guess your material would still be affected.


0.1g


AVB. I guess I could vape it more?

.
Herbs before being vaped


12 o'clock


10 o'clock

I find that the Evo works best after letting it heat up for around 10- 15 minuites before use. I turn mine on and set it at the 3 o'clock position-then when it's ready , turn it down to 2'0 clock and let her rip. Take the ELB out in between hits and give it a shake . I also grind mine a little finer , like powder, more surface area exposed the better.

Edit: Yeah sorry any sort of water tool helps, lets you visually see how much vapor you're getting. Doesn't have to be a hydratube just a decent piece with an 18 mm female joint.

 

[Florence]

Not to speak for him or be an apoligist, but (I'm assuming) he's using a 3d printer. He'll need something more precise then string lol

I assume there will be a natural variance in the thickness of each piece, so printing something that's exact down to the hindredth of an inch may not be the best idea if that's the case. You would want a hole slightly larger than all the nails to accommodate for natural variance. Unless they are truly all exactly the same size.

 

[Seek]

But what procedure would you recommend if you wanted to take 5-6 satifsfying draws per session?

More than 0.1 in the ELB. A vape can only extract as much vapor as there is.
And 5-6 good vapexhale EVO hits - that's a lot of vapor, too much imo actually - it would floor me.
Put more herbs in the ELB and the hits will get both denser and you will get more of them.
Set a higher temperature and hits get denser and different taste and slightly different effects and it will give you less hits.
Some examples:
You want the biggest densest lung-busting hit and some more - fill ELB with 0.3-0.4g and rip it at 2-5 o'clock.
You want a lot of nice smooth satisfying hits - 0.3-0.4g at 10-12 o'clock
You want one string dense hit - .05-0.1g at 2-5 o'clock.
Few weak hits - .05-.1g at 10-12 o'clock (what you did)

Would a hydratube help?

A hydratube cools down a smoothes out the vapor allowing you to take bigger hits.
Therefore you get less of them.
So if you are after a lot of hits, then no.
But I think vaping everything in as few hits as possible it a sign of great vaporizer performance.
When you bought such a high-performing device, you should be expecting that it extract everything a lot faster than other ones giving you less hits but bigger.

Also, I'm wondering if using a filler with my weed (like mint) could help me get my necessary high (don't need that much material) and still fill the ELB up to take more draws?

I recommend trying vaping mint because it's a nice experience. Mint needs a lower temperature than weed and will only give you one amazingly mint tasting hit. Because of these properties its not good for mixing with weed in a vape.
The mint will be vaped in one draw and then starts tasting bad while you are vaping your mj. And it will probably not expand the number of draws a lot. IMO you need to fill with more mj to make it last longer.

How would I tell apart my AVB from my vaped mint in that case, so i can cook with it afterward without the mint?

Also, I wouldn't leave my filled ELBs in the Cloud Evo while it's still heated up. I did a test with mint, leaving it in the vaporizer for 20 mins while it was on max temperature. The mint came out brown. Less heat wouldn't produce that effect, but I guess your material would still be affected.

Yes, leaving the ELB in will slowly vaporize it. The hot air goes up slowly, when I put a mouthpiece on a loaded EVO I can see the vapor flowing up at a speed about one cm per second. Mint on max is one extreme. As mint vaporizer quickly and on low temp, max temp can vape it withing 20 minutes even without hiting it. MJ would still give you cloud after that, but it will also lose a bit of actives.

How would I tell apart my AVB from my vaped mint in that case, so i can cook with it afterward without the mint?

If you had two piles of ABV, one mint and one mj, you could probably tell them apart.
But mixed together? Good luck with that. And separate the mix? Totally not worth "it".
And why would you even want "it"? Why would you want to discard ABV mint from mj? The menthol is already long gone, so it wouldn't hurt anything to cook with it too. Anyway, as I already said mixing these two is not a good idea just because how much differenty they vaporize.

 

[Drew_de_Verdamper]

@Havoc :
Thanks for sharing your impressions & experiences. Always a good read.
I guess @Seek already explained a lot now but i wanted to complement, that your AVB really looks a little bright IMO. I usually start vaping with herbs grinded the way yours look. But after one or 2 draws i put it out, stir and grind (again) and that gives me another cloud (though less taste).
But anyway, we seem to have in common that we need just a little amount of MJ to achieve a satisfactory high. Therefore I personally like these micro dosing best. Gives you 2-3 (for 0.1g) or 1-2 (0.05g) draws and I think the Evo is a great solution for sessions like this.

 

[LegaliseIt]

I bake AVB more too.

 

[Havoc]

@Mangos , @Seek , @Drew_de_Verdamper
Thanks for your input. Yes, well it seems i need to keep experimenting. I might also look for some filler material that looks distinctively different from weed.
Regarding the separation from weed and filler material: well, if I wanna make firecrackers for example, i only wanna use potent stuff, i see no reason why i should utilize useless herbs.

I'm a joint smoker, usually i would use no more than 0.1g of weed mixed with tobacco, that's just the way most people smoke in Europe. I would smoke about 3 an evening (so around 0.3-0.4g a day) before going to sleep every day, and I enjoyed the long lasting ritual, it contributed to my relaxing phase. Seems my habits need to change now that I've started vaping. It would be a shame if I needed to consume more weed just for the session to last longer. As I said, I'm very happy with my high, I just feel like there's something missing compared to before, but it's a detail.

@Drew_de_Verdamper What temperature do you use? I was able to get two satisfying draws from 0.1g on 11 o'clock.

 

[BigJohnny]

@Mangos , @Seek , @Drew_de_Verdamper
Thanks for your input. Yes, well it seems i need to keep experimenting. I might also look for some filler material that looks distinctively different from weed.
Regarding the separation from weed and filler material: well, if I wanna make firecrackers for example, i only wanna use potent stuff, i see no reason why i should utilize useless herbs.

I'm a joint smoker, usually i would use no more than 0.1g of weed mixed with tobacco, that's just the way most people smoke in Europe. I would smoke about 3 an evening (so around 0.3-0.4g a day) before going to sleep every day, and I enjoyed the long lasting ritual, it contributed to my relaxing phase. Seems my habits need to change now that I've started vaping. It would be a shame if I needed to consume more weed just for the session to last longer. As I said, I'm very happy with my high, I just feel like there's something missing compared to before, but it's a detail.

@Drew_de_Verdamper What temperature do you use? I was able to get two satisfying draws from 0.1g on 11 o'clock.

Hi mate, I reckon you are missing the hit from the tobacco. Once you get used to not having that, you should find vaping 100% satisfying.

 

[Havoc]

Hi mate, I reckon you are missing the hit from the tobacco. Once you get used to not having that, you should find vaping 100% satisfying.

Well as I said, I'm not missing anything effect wise, my only gripe is that I can't spend 20 minutes vaping on my EVO like I could spend 20 minutes on smoking my joint. But hey, I'm young enough to still adapt

 

[BigJohnny]

Well as I said, I'm not missing anything effect wise, my only gripe is that I can't spend 20 minutes vaping on my EVO like I could spend 20 minutes on smoking my joint. But hey, I'm young enough to still adapt

Sorry mate, I misunderstood. I thought you were missing something effect wise.